Abstract
We propose and demonstrate a new Q-switched thulium-doped fiber laser (TDFL) by utilizing a passive saturable absorber (SA) based on Molybdenum–Aluminium boride (MoAlB). The MoAlB is a metal–ceramic-based material; it is embedded in polyvinyl-alcohol (PVA) material to operate as the SA. The laser successfully generates stable Q-switched pulses operating at 1974.7 nm with a maximum repetition rate of 57.7 kHz and a minimum pulse width of 1.79 μs. A maximum pulse energy of 90.2 nJ is recorded at 436 mW pump power. Our experiment is the first demonstration on the use of MoAlB for the pulse laser generation in the 2 μm wavelength region.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
S. Yao, S. Y. Chen, A. Pal, et al., Sens. Actuator A Phys., 226, 11 (2015).
C.W. Rudy, M. J. F. Digonnet, and R. L. Byer, Opt. Fiber Technol., 20, 642 (2014).
A. A. Shakaty, J. K. Hmood, B. R. Mahdi, et al., Opt. Laser Technol., 146, 107569 (2022).
M. F. M. Rusdi, A. H. A. Rosol, M. F. A. Rahman, et al., Opt. Commun., 447, 6 (2019).
A. A. Al-Azzawi, A. A. Almukhtar, B. A. Hamida, et al., Results Phys., 13, 102186 (2019).
C. G. E. Alfieri, A. Diebold, F. Emaury, et al., Opt. Express, 24, 27587 (2016).
A. S. Al-Hiti, A. H. H. Al-Masoodi, S. W. Harun, et al., Opt. Laser Technol., 131, 106429 (2020).
A. S. Al-Hiti, R. Apsari, M. Yasin, and S. W. Harun, Infrared Phys. Technol., 116, 103788 (2021).
X. Peng and Y. Yan, J. Eur. Opt. Soc. Rapid Publ., 17, 1 (2021).
J. Sotor, G. Sobon, K. Grodecki, and K. M. Abramski, Appl. Phys. Lett., 104, 251112 (2014).
Q. Wei, X. Han, H. Zhang, et al., Appl. Opt., 59, 7792 (2020).
Z. Dou, Y. Song, J. Tian, et al., Opt. Express, 22, 24055 (2014).
Z. Luo, Y. Huang, J. Weng, et al., Opt. Express, 21, 29516 (2013).
J. Sotor, G. Sobon, and K. M. Abramski, Opt. Express, 22, 13244 (2014).
A. S. Al-Hiti, A. H. H. Al-Masoodi, W. R. Wong, et al., Opt. Laser Technol., 139, 106971 (2021).
L. Li, Y. Su, Y. Wang, et al., IEEE J. Sel. Top. Quantum Electron., 23, 44 (2016).
P. Wang, D. Hu, K. Zhao, et al., IEEE J. Sel. Top. Quantum Electron., 24, 1 (2017).
M. Liu, W. Liu, and Z. Wei, J. Lightw. Technol., 37, 3100 (2019).
J. Yin, Y. Su, Y. Wang, et al., Opt. Express, 25, 30020 (2017).
A. S. Al-Hiti, A. H. H. Al-Masoodi, W. R. Wong, and S. W. Harun, IET Optoelectron., 14, 278 (2020).
K.-X. Huang, B. L. Lu, D. Li, et al., Appl. Opt., 56, 6427 (2017).
A. S. Al-Hiti, M. F. A. Rahman, S. W. Harun, et al., Opt. Fiber Technol., 52, 101996 (2019).
S. P. Munagala, “MAX phases: New class of carbides and nitrides for aerospace structural applications,” in: Aerospace Materials and Material Technologies, Springer (2017), pp. 455–465.
G. Song, “Self-healing of MAX phase ceramics for high temperature applications: Evidence from Ti3AlC2,” in: Advances in Science and Technology of Mn+1 AXn Phases, Elsevier (2012), pp. 271–288.
M. W. Barsoum, Progress in Solid State Chemistry, 28, 201 (2000).
A. S. Al-Hiti, M. Yasin, and S. W. Harun, Opt. Fiber Technol., 68, 102763 (2022).
M. Wang, S. Huang, Y.-J. Zeng, et al., Opt. Mater. Express, 9, 4429 (2019).
H. Ahmad, A. S. Sharbirin, A. Muhamad, et al., J. Lightw. Technol., 35, 2470 (2017).
H. Ahmad, A. Z. Zulkifli, K. Thambiratnam, and S. W. Harun, IEEE Photon. J., 5, 1501108 (2013).
M. F. A. Rahman, A. A. Latiff, U. Z. M. Zaidi, et al., Opt. Commun., 421, 99 (2018).
B. Ibarra-Escamilla,M. Durán-Sánchez, B. Posada-Ram´ırez, et al., IEEE Photon. Technol. Lett., 30, 1768 (2018).
H. Ahmad, A. S. Sharbirin, and M. F. Ismail, Opt. Laser Technol., 120, 105757 (2019).
H. Sakata, K. Kimpara, and N. Takahashi, Electron. Lett., 52, 63 (2016).
A. R. Muhammad, R. Zakaria, M. T. Ahmad, et al., Opt. Fiber Technol., 50, 23 (2019).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Diblawe, A.M., Ahmad, B.A., Dimyati, K. et al. Q-Switched Thulium-Doped Fiber Laser with Molybdenum–Aluminum-Boride-Based Saturable Absorber. J Russ Laser Res 44, 172–178 (2023). https://doi.org/10.1007/s10946-023-10120-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10946-023-10120-2