A study has been made of the flow of a non-Newtonian polymer medium in a plane channel and of heat transfer in it with boundary conditions of the first kind for small Reynolds numbers and a large Péclet number with the Ellis rheological model with a viscosity dependent on the temperature, pressure, and degree of chemical conversion of the medium. Consideration was given to the flow of a high-viscosity medium with chemical reactions leading to an abrupt increase in its viscosity for whose mathematical description the authors used a model that included the kinetic chemical-reaction equation and the energy equation with a dissipative term. Significant influence of various factors on the formation and rate of growth of the solidified wall layer in such flow has been shown. The problem has been solved numerically by the finite-diff erence method according to the iterative scheme.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A. V. Baranov, Nonisothermal channel flow of a non-Newtonian fluid under the conditions of chemical transformations, J. Eng. Phys. Thermophys., 95, No. 4, 1031–1036 (2022).
N. V. Tyabin, O. Kh. Dakhin, and A. V. Baranov, Conjugated heat transfer in the flow of a non-Newtonian fluid with variable properties in a flat duct, J. Eng. Phys. Thermophys., 45, No. 3, 979–983 (1983).
A. V. Baranov and S. A. Yunitskii, Influence of dissipative on heat transfer during the flow of a non-Newtonian fluid in a porous channel, J. Eng. Phys. Thermophys., 90, No. 4, 1003–1009 (2017).
V. M. Shapovalov, On the applicability of the Ostwald–de Waele model in solving applied problems, J. Eng. Phys. Thermophys., 90, No. 5, 1213–1218 (2017).
A. V. Baranov and N. A. Anisimova, Rheological features of polymer compounds in the processing, Mekh. Komp. Mater. Konstrukts., 14, No. 2, 188–206 (2008).
A. V. Baranov, Influence of temperature and pressure on viscoelastic fluid flow in a plane channel, J. Eng. Phys. Thermophys., 93, No. 5, 1296–1302 (2020).
A. I. Leonov, N. I. Basov, and Yu. V. Kazankov, Principles of Processing of Thermosetting Plastics and Rubbers by the Pressure Casting Method [in Russian], Khimiya, Moscow (1977).
A. Ya. Malkin and S. G. Kulichikhin, Rheology in the Processes of Formation and Conversion of Polymers [in Russian], Khimiya, Moscow (1985).
A. Ya. Malkin, A. V. Baranov, and M. E. Vickulenkova, Experimental estimation of wall slip for filled rubber compounds, Rheologica Acta, 32, No. 2, 150–155 (1993).
A. Ya. Malkin and A. V. Baranov, Flow of non-Newtonian liquid through a channel when solidification of a liquid leads to wall slip, J. Non-Newtonian Fluid Mech., 39, 55–66 (1991).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 97, No. 1, pp. 93–97, January–February, 2024
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Baranov, A.V. Influence of Various Factors on the Flow of a Chemically Reactive Non-Newtonian Fluid in a Plane Channel. J Eng Phys Thermophy 97, 92–96 (2024). https://doi.org/10.1007/s10891-024-02871-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10891-024-02871-9