Abstract
A finite element model for Magnetoelectric (ME) effect of Metglas/PVDF laminates is built in this study, considering the mechanical energy loss and bonding layer. By introducing a loss factor, the ME voltage value (αME) of composite reduces from 14,467.6 to 148.4 V/(cm·Oe), which are more consistent with the experimental results. The detailed analysis focuses on the influences of geometric parameters, mechanical energy loss, and the adhesive layer on the magnetostrictive effect in ME composites. It was observed that reducing the length and increasing the thickness enhanced demagnetization of the magnetostrictive phase while diminishing ME effect. Furthermore, an increase in the thickness of the piezoelectric phase and epoxy resin resulted in a reduction in stress transfer and a decrease in the ME effect. The amplification of the material loss factor led to an increase in stress loss, consequently weakening the ME effect. The ME effect reached its peak value of 192.7 V/(cm·Oe) when the Young's modulus of epoxy resin was approximately 0.1 GPa, and a significant increase in resonance frequency was observed with an increasing Young's modulus of epoxy resin. This work can make the modeling results closer to the actual experimental phenomena, which is crucial in guiding the development and performance optimization of ME materials, as well as encouraging their practical applications.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Data availability
The data presented in this study are available from the corresponding author upon reasonable request.
References
W. He, S. Liu, J. Magn. Magn. Mater. 542, 168609 (2022)
C.X. Sun et al., IEEE Sens. J. 22, 4028 (2022)
A. Lasheras et al., J. Alloys Compd. 884, 161065 (2021)
F.A. Fedulov et al., J. Magn. Magn. Mater. 547, 168943 (2022)
J. Kim et al., Nano Energy 89, 106409 (2021)
J. Xu et al., Ceram. Int. 49, 25170 (2023)
X.J. Mu et al., J. Mater. Sci. 56, 9728 (2021)
D.D. Wen et al., Int. J. Mol. Sci. 23, 15992 (2022)
A. Chaurasiya et al., Ceram. Int. 46, 25873 (2020)
L. Wang, F.G. Yuan, Smart Mater. Struct. 17, 045009 (2008)
H. Zhang et al., J. Phys. D Appl. Phys. 54, 095003 (2021)
B. Qi et al., IEEE Access 8, 68049 (2020)
X.T. Yuan et al., Nano Energy 85, 105985 (2021)
J.Y. Zhai et al., Appl. Phys. Lett. 89, 083507 (2006)
X.D. He et al., Ceram. Int. 44, S100 (2018)
H. Staaf et al., Sci. Rep. 12, 5233 (2022)
G. Zhou et al., Ceram. Int. 48, 10244 (2022)
H. Wan et al., Acta Phys. Sin. 54, 1426 (2005)
Y.K. Yang, B.T. Yang, Int. J. Mech. Sci. 199, 106411 (2021)
M. Sadeghi et al., J. Mater. Sci. Mater. Electron. 30, 16527 (2019)
Y. Lefevre et al., IEEE Trans. Magn. 54, 7400304 (2018)
C.S.L. Fernandez et al., Compos. Sci. Technol. 146, 119 (2017)
Y. Uetsuji et al., Comput. Mater. Sci. 158, 159 (2019)
Y.X. Liu et al., J. Appl. Phys. 94, 5111 (2003)
N. Galopin et al., IEEE Trans. Magn. 44, 834 (2008)
T.T. Nguyen et al., J. Appl. Phys. 109, 084904 (2011)
J.J. Zhang et al., Compos. Struct. 296, 115876 (2022)
F. Yang et al., Acta Phys. Sin. 56, 3539 (2007)
B. Zhang et al., IEEE Access 8, 187848 (2020)
D. Stachowiak, COMPEL 35, 1371 (2016)
C. Mudivarthi et al., Smart Mater. Struct. 17, 035005 (2008)
X.Q. Wang et al., Compos. Sci. Technol. 216, 109069 (2021)
B. Chen et al., Polymers 14, 2427 (2022)
H. Abramovich et al., Prog. Aerosp. Sci. 78, 8 (2015)
N. Peyret et al., Int. J. Appl. Mech. 8, 1650097 (2016)
M.Y. Liao et al., Jpn. J. Appl. Phys. 56, 024101 (2017)
C. Li et al., J. Micromech. Microeng. 31, 115001 (2021)
P. Li et al., IET Sci. Meas. Technol. 16, 327 (2022)
C.H. Wang et al., Sens. Actuator A 359, 114456 (2023)
C.Z. Ma et al., Eur. J. Mech. A. Solids 99, 104948 (2023)
H.M. Zhou et al., J. Alloys Compd. 672, 292 (2016)
J. Goken et al., Acta Phys. Pol. A 133, 1241 (2018)
Y.W. Gao, J.J. Zhang, Smart Mater. Struct. 22, 015015 (2013)
N. Pereira et al., Materials 13, 1729 (2020)
M.P. Silva et al., J. Magn. Magn. Mater. 377, 29 (2015)
Y.B. Long et al., AIP Adv. 7, 125029 (2017)
G.T. Hwang et al., ACS Appl. Mater. Interfaces 10, 32323 (2018)
A. Lasheras, J. Gutiérrez, J. Magn. Magn. Mater. 479, 282 (2019)
A. Lasheras et al., Appl. Phys. Lett. 108, 222903 (2016)
Z.Q. Chu et al., J. Phys. D Appl. Phys. 51, 243001 (2018)
J. Gu et al., Scr. Mater. 57, 529 (2007)
A. Sagasti et al., Sensors (Basel) 19, 4296 (2019)
A. Aharoni, J. Appl. Phys. 83, 3432 (1998)
P.G. Saiz et al., J. Alloys Compd. 863, 158555 (2021)
A. Lasheras, J. Gutierrez, J. Magn. Magn. Mater. 479, 282 (2019)
C.J. Lu et al., AIP Adv. 10, 055308 (2020)
Z.Q. Chu et al., Adv. Mater. 29, 1606022 (2017)
J. Das et al., Appl. Phys. Lett. 95, 092501 (2009)
Z. Fang et al., Appl. Phys. Lett. 95, 112903 (2009)
N. Pereira et al., Materials (Basel) 13, 1729 (2020)
S.Y. Yang et al., J. Phys. D Appl. Phys. 55, 175002 (2022)
Acknowledgements
This work was supported by the National Natural Science Foundation of China (NNSFC) with Grant Nos. 11604172.
Funding
This work was supported by the National Natural Science Foundation of China (NNSFC) with Grant Nos. 11604172.
Author information
Authors and Affiliations
Contributions
All authors contributed to the study’s conception and design. Material preparation, data collection, ancd analysis were performed by Xuanning Zhang, Jing Cao, Qiujiao Du, Ling Chen, Xia Wang, Derang Cao and Jie Xu. The frst draft of the manuscript was writen by Shaoxiong Fan and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no fnancial and personal relationships with other people or organizations that can inappropriately infuence our work.
Ethical approval
The authors declare that this study has undergone ethical review and complies with relevant ethical standards.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Fan, S., Zhang, X., Li, Y. et al. The effect of mechanical energy loss and bonding layer on magnetoelectric performance for metglas/PVDF laminated composites. J Mater Sci: Mater Electron 35, 552 (2024). https://doi.org/10.1007/s10854-024-12296-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10854-024-12296-y