Abstract
The seismic risk and vulnerability of urban building clusters are fundamental indicators for quantifying urban seismic resilience. The empirical vulnerability and risk models developed using various risk probability assessment theories and real seismic loss observation data from typical building clusters can provide positive references for predicting and evaluating urban earthquake resilience. However, the data used to validate and optimize the vulnerability and resilience models of building portfolios are mostly discrete points within a city. The coupling effect of multiple intensity measures is rarely considered, resulting in a relatively low evaluation accuracy of the established seismic hazard model. This study considers the comprehensive impact of macroseismic and instrumental intensity on the vulnerability of typical urban building portfolios. A multidimensional parameter seismic risk and vulnerability model considering updated damage states is proposed. Based on field inspection data from the 2008 Wenchuan earthquake in China, an optimized hazard and vulnerability model considering all the buildings (8669 buildings) in Dujiangyan city was developed. An innovative structural vulnerability membership index was proposed to estimate the correlation between typical damage states, and vulnerability correlation parameter models were developed. An improved nonlinear vulnerability regression model considering hybrid intensity measures was proposed, and vulnerability comparison curves and matrices were generated considering the empirical damage data of buildings in Dujiangyan city. An optimized seismic damage index calculation model was developed considering five typical building portfolios in Dujiangyan city.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
1 Introduction
Earthquake disasters have brought severe challenges and impacts to cities’ economic losses and social development. Most economic losses caused by earthquakes in cities are due to the destruction and failure of building clusters (Hu 2006). An earthquake event directly or indirectly affects the sustainable development of cities. To improve the seismic resilience and functional resilience of typical urban and rural building clusters, conducting research on seismic risk and structural vulnerability based on regional buildings has significant scientific significance and value. This approach can contribute positively to evaluating and predicting urban seismic resilience (Chen et al. 2022). Seismic intensity is a pivotal indicator for quantifying regional buildings’ seismic hazard and vulnerability (Iervolino 2022). Probability model theory, reliability algorithms, seismic risk models, soft computing technology (machine learning, artificial intelligence, and digital imaging technology), Bayesian models, empirical seismic fragility, and analytical seismic vulnerability are ubiquitously used to assess and predict the features of seismic hazards, vulnerability, and economic loss of urban building portfolios (Gardoni et al. 2016; Tabandeh and Gardoni 2014; Boakye et al. 2022).
Seismic hazard theory, nonlinear dynamics, probabilistic risk theory, and Bayesian models are implemented to evaluate and predict the vulnerability of typical urban buildings and the sustainability and seismic resilience of cities. A probability risk function was proposed by Rezael et al. (2023), and a multivariate vulnerability analysis was conducted on nonreinforced masonry walls, generating vulnerability curve bundles based on different structural characteristic parameters. Manfredi et al. (2023) considered the impact of the construction period of typical regional building clusters in Italy on structural vulnerability. They used the European Intensity Standard (EMS-98) to develop design spectra and vulnerability curves for regional building portfolios based on different return periods. Du et al. (2023) selected and developed the regional seismic risk and resilience assessment method to analyse the potential physical processes and uncertainties of typical urban structures under the influence of an earthquake disaster. They compared the structural vulnerability curve model developed based on the incremental dynamic method and cloud computing. Tekeste et al. (2023) and Yoshida et al. (2023) proposed a quantitative program for vulnerability assessment of typical urban buildings using Bayesian model updating algorithms. They developed a structural hazard prediction model based on Bayesian update models by combining vibration test data and Gaussian processing models. Gioiella et al. (2023) conducted an earthquake damage and economic loss analysis of school buildings in the Italian region. Using a probabilistic earthquake risk model, a vulnerability function was developed considering five structural failure states and the seismic risk distribution of urban building clusters.
Shrestha et al. (2022) compared the structural damage modes of two cities, Christchurch, New Zealand, and L’Aquila, Italy, under similar earthquakes. Using collapse probability risk and seismic hazard models (Sharma et al. 2023), the seismic risk distribution of building clusters based on two cities was developed. Bigdeli et al. (2023) established a suitable probability demand model to evaluate the seismic hazard of building structures. Using the base finite element model, they developed an earthquake demand hazard curve considering 36 scalar strengths. A seismic vulnerability matrix considering large-scale probabilistic structural safety assessment was proposed by Sandoli et al. (2023). They proposed a method for estimating seismic vulnerability in large-scale urbanized areas and developed a vulnerability matrix model based on hypothetical vector seismic intensity measures, taking typical urban building clusters in Italy as an example.
With the development of artificial intelligence, digital detection technology, and modern means of earthquake economic loss assessment, many soft computing technologies and algorithms have been broadly used in predicting the earthquake risk and vulnerability of urban buildings. Kazemi et al. (2023) developed a risk model for evaluating the seismic vulnerability of reinforced concrete (RC) structures using machine learning algorithms. They compared and analysed the sample information of 165 data points using artificial neural networks, additional tree regressors, random regressors, and limit gradient enhancement algorithms. They also derived the seismic risk curve of regional RC buildings. Zhang et al. (2023) used random forest, extreme gradient enhancement, and active machine learning algorithms to develop a model for the rapid assessment of earthquake damage in China; trained and tested 9,900 data points; and established a model capable of assessing structural damage status. Meyers-Angulo et al. (2023) studied the seismic vulnerability of urban building portfolios and combined machine learning bipartite clustering analysis and neural network algorithms to predict the vulnerability of typical urban building portfolios. Kazemi et al. (2023) and Luo and Paal (2019) incorporated quantified uncertainty into the seismic risk assessment of typical building portfolios. They obtained damage datasets for RC buildings using incremental dynamic analysis methods. They utilized machine learning and intelligent algorithms for model training and testing and developed an earthquake risk prediction model based on urban building clusters. Ruggieri et al. (2021, 2022) and Blagojević et al. (2023) utilized machine learning, regional risk analysis, and remote sensing image automation technologies to conduct vulnerability analysis on existing building clusters in typical urban areas and generated vulnerability curves based on modern intelligent technology.
Assessing the seismic damage and economic losses of typical urban buildings is the core work for quantifying urban seismic resilience and vulnerability. Kalantari et al. (2023) used probabilistic seismic risk assessment methods to assess the seismic risk and predict the economic losses of urban buildings in Tehran (the Iranian capital). They evaluated the vulnerability of different building categories in this city and generated seismic risk distributions for urban structures. Ruggieri et al. (2020) considered the influence of building components on seismic vulnerability and developed a numerical application program that considers the influence of structural floor deformation; this program was used for structural response and seismic vulnerability estimations. Xi (2022) and Xu et al. (2019) studied the housing reconstruction plan of Dujiangyan city after the Wenchuan earthquake in China. They developed an economic cost prediction and evaluation model considering the reconstruction of typical urban buildings using the nonlinear regression method.
The seismic vulnerability index is critical for evaluating the seismic resilience and risk assessment of typical urban building portfolios. Kassem et al. (Kassem et al. 2023) and El-Maissi et al. (2023) proposed an evaluation method for the seismic vulnerability of regional building clusters based on an improved seismic vulnerability index and used it to monitor and evaluate the seismic vulnerability of typical urban building portfolios in Malaysia. The traditional probabilistic seismic risk analysis method was considered by Eudave et al. (2022), Fontenele et al. (2023), Zhong et al. (2023c), Li et al. (2024a, b), Yang et al. (2023), Jiménez et al. (2021) and Chieffo et al. (2022, 2023), and a seismic vulnerability index-based method was established to evaluate the seismic risk of typical historical cities in Mexico, Brazil, Chile, and Italy. The model was validated against actual seismic damage observation data.
Using probabilistic seismic hazard theory, actual seismic hazard inspection data, and physical-based methods, scholars in earthquake engineering from different regions worldwide have developed multidimensional regional empirical structural vulnerability models. Mouloud et al. (2023) conducted an actual structural damage survey on Mira in northeastern Algeria during the 2022 earthquake, collecting damage data on masonry, concrete, and colonial-era buildings. They developed an earthquake risk distribution based on evaluating a typical urban seismic zone. Surana et al. (2022) processed historical earthquake damage data from northern India and analysed various traditional buildings’ actual earthquake damage mechanisms. Orntharmarath et al. (2023) reported the actual seismic damage characteristics of Thailand’s 2014 Mae Lao earthquake. They developed a quantitative relationship model for the seismic vulnerability of typical urban building clusters.
In Italy, research on the empirical seismic vulnerability of regional structures has rapidly developed. Many experts have established multidimensional empirical vulnerability models, contributing significantly to this field. Di Ludovico et al. (2023) conducted actual seismic damage observations in Abruzzo city, which was affected by the L’Aquila earthquake in 2009, and obtained actual loss data for school clusters. A vulnerability curve based on empirical structural loss was generated by combining probability models and nonlinear regression methods. Rosti et al. (2023) proposed a physical-based numerical simulation method to conduct damage analysis on an empirical earthquake database and establish a seismic risk distribution considering multiple building structures. Cardinali et al. (2022) proposed a hybrid-based seismic vulnerability assessment method and established a seismic risk and vulnerability model for typical urban buildings. Lagomarsino and Giovinazzi (2006) proposed a seismic vulnerability assessment function for regional structures based on macroscopic intensity scales. They established various quantitative curve models for the seismic risk and vulnerability of building portfolios. Formisano and Chieffo (2023), Formisano et al. (2023), Longobardi and Formisano (2022) and Chieffo et al. (2019, 2021a) collected and processed actual seismic damage data for historical urban buildings in Italy, taking into account the effects of age, material characteristics, and geometric forms on the seismic vulnerability of urban buildings. A regression model for the seismic risk distribution and vulnerability of urban buildings considering multiple damage levels was developed. Del Gaudio et al. (2021), Scala et al. (2022), Gaudio et al. (2019), Gaudio et al. (2017) investigated the damage mechanism of masonry and RC structures affected by the L’Aquila earthquake and proposed a regression model to evaluate the seismic risk and vulnerability of regional structures. Follador et al. (2023), Sandoli et al. (2022) and Acito et al. (2023) reported the seismic damage features of building structures in typical urban zones of historical earthquakes in Italy. They developed vulnerability curves of multiple modes using the theory of probabilistic models.
China is one of the countries with the highest frequency of earthquakes (Hu 2006). Many catastrophic earthquakes have caused serious damage to lifeline engineering structures and buildings in different cities. Acquiring actual seismic loss data for buildings has contributed significantly to developing multidimensional empirical vulnerability models. Sun and Zhang (2018) conducted an authentic seismic damage assessment of the 2008 Panzhihua earthquake in China, proposed a seismic loss index calculation function based on multiple damage levels (Zhong et al. 2023a, b), and modified the model using earthquake data. Gong et al. (2015) analysed the actual failure mechanisms of various building structures during the 2011 Yushu earthquake, collected empirical earthquake loss data from 63 cities and villages, and developed a vulnerability hazard matrix. Li et al. (2023), Li (2024a), Li and Zhong (2024) studied the seismic damage features of various buildings and bridge clusters in more than ten cities after the Wenchuan earthquake and developed an empirical vulnerability database and probability model based on macroseismic intensity measures. Using the macroseismic intensity standards of different periods in China GB/T 17742 (1999, 2008, 2020), Li (2024b) evaluated the vulnerability and economic losses of more than 200 destructive earthquakes in China and developed a vulnerability matrix and financial loss prediction model for various building clusters considering actual earthquake damage databases. Li and Gardoni (2024) investigated and analysed the actual earthquake loss of three typical catastrophic earthquakes (Li 2024c) (Li and Formisano 2023), considered various factors affecting the vulnerability of buildings and developed a quantitative model based on an empirical vulnerability database. Chieffo et al. (2021b), (Chieffo and Formisano 2019), Biglari and Formisano (2020), Kohns et al. (2022), Yazdananah (2021), and Mai et al. (2017) considered the seismic risk and vulnerability characteristics of buildings in typical historical central regions and used probabilistic risk assessment methods, damage probability matrices, vulnerability functions, and curves to demonstrate the risk and resilience of building clusters under different intensity measures.
The above research evaluated and predicted earthquake damage and economic losses in typical areas and urban building clusters through different methods. Multiple vulnerability and hazard quantification models considering actual earthquake loss have been developed, contributing positively to the study of earthquake risk and vulnerability (China Earthquake Administration and National Bureau of Statistics 2001, 1996, 2005). However, most studies have focused on discrete seismic damage sample points in a specific zone for earthquake risk research and have neglected the dynamic disaster and vulnerability features of entire urban building portfolios. Reference Li (2024b) used sample data from the Dujiangyan earthquake zone to establish a vulnerability model based on a statistical algorithm. However, this study ignored the impact of nondamaged buildings on the vulnerability and seismic risk of the overall buildings. Some earthquake damage samples were omitted, resulting in relatively low accuracy of the established urban building vulnerability statistical model. This study improved upon the actual earthquake damage observation sample from Dujiangyan city affected by the 2008 Wenchuan earthquake in China and updated the traditional disaster database of urban buildings. A comprehensive evaluation function considering instrument and macroseismic intensity (hybrid intensity) is proposed using reliability and seismic risk probability analysis methods. The assessment level of building damage in the Chinese macrointensity standard has been expanded, and the classification of the nondamaged state (DS0) has been added, making the damage assessment more detailed. The vulnerability membership parameter is innovatively proposed to measure the degree of membership of the DS0 level to other damage states. An updated seismic risk and vulnerability parameter model based on five typical building clusters (multistory masonry structure (MMS), RC, bottom frame seismic wall masonry (BFM), workshop buildings (WS), and other buildings (OBs)) in Dujiangyan city is developed. An optimized nonlinear regression function is proposed, and a vulnerability and risk regression model for urban building clusters based on a typical earthquake is developed. The traditional seismic damage index calculation matrix has been updated. An optimized average seismic damage index matrix, point cloud, and curve for five building portfolio types in typical cities were established. The structural seismic vulnerability and risk model and index proposed in this paper have been validated by actual structural seismic failure data. We processed and statistically analysed 8,669 buildings surveyed on site, and a structural disaster database was established according to different structural categories. The developed sample database was subjected to structural damage estimation and calibration using the proposed updated vulnerability model and index. Figure 1 shows the flowchart of this paper.
2 Vulnerability model of urban buildings considering seismic hazard theory
The core task of seismic design and risk assessment for urban buildings is to estimate the probability of casualties caused by structural failure. Earthquake hazards assess the probability of exceeding a given ground motion (Hu 2006). A probability seismic hazard function based on urban buildings is proposed by combining seismic hazard theory, probability model analysis methods, seismic intensity measures, and exceedance probability algorithms, as expressed in Eq. 1 (Hu 2006) (Gardoni et al. 2016) (Tabandeh and Gardoni 2014).
where \(\kappa_{ls}\) is the seismic hazard function for different damage levels. \({\rm A}[ \cdot ]\) is a function that assumes a power exponential relationship between earthquake demand and earthquake intensity. \(\beta_{1}\) and \(\beta_{2}\) are power exponential relationship parameters between seismic demand and seismic intensity, respectively. \(M_{C}\) and \(\beta_{C}\) represent the median and standard deviation of the seismic resistance of the structure, respectively. \(\beta_{{D\left| {IM} \right.}}\) denotes the logarithmic standard deviation of seismic demand D under the action of the seismic intensity measure IM. k is the risk uncertainty coefficient.
Performance-based earthquake engineering (PBEE) and performance-based seismic design have become development trends in the international seismic engineering field. The Pacific Earthquake Engineering Research Center has developed a risk model considering the mathematical basis of PBEE probability decision-making. By combining this algorithm, seismic hazard, vulnerability, and loss model, a full probability seismic risk function was proposed by Li and Gardoni (2024), Gardoni et al. (2016), and Tabandeh and Gardoni (2014), as expressed in Eq. 2.
where EDP is an engineering demand parameter. \(G( \cdot )\) represents the seismic risk probability damage quantification function.
The risk probability model, seismic intensity measures, magnitude, and time-varying damage parameters of urban building clusters were adopted by Iervolino (2022) for the development of seismic hazard models, and a probability function was proposed to evaluate urban seismic risk, as expressed in Eq. 3.
\(EM_{IM > x} ({\kern 1pt} \Delta t + t,t)\) denotes the function of IM exceeding x under the influence of earthquake magnitudes, \(\Delta t\), and \(t\). \(P[IM \le x\left| {ES} \right.]\) is the conditional probability of \(IM \le x\) under the influence of a random earthquake ES. \(\varepsilon\) is the magnitude uncertainty coefficient. \(P[IM({\kern 1pt} \Delta t + t,t) > x]\) is the probability of the IM reaching the limited threshold x based on the influence of the time parameter \(t\) and interval \(\Delta t\).
The principles of probabilistic seismic risk and data statistics are considered. A Bayesian update model for evaluating the seismic vulnerability of urban building portfolios was proposed (Tekeste et al. 2023), (Yoshida et al. 2023), as expressed in Eq. 4.
\(p(\vartheta \left| {UB} \right.)\) is the posterior probability distribution of vulnerability \(\vartheta\) of the seismic damage sample data UB of a given urban building. \(p(UB\left| \vartheta \right.)\) and \(p(UB)\) are the probabilities and evidence of the vulnerability \(\vartheta\) of building clusters under the influence of a given sample of urban earthquake damage data. \(p(\vartheta )\) is a prior probability.
The seismic vulnerability \(V(x)\) of urban building portfolios is the probability that the building cluster reaches or exceeds a specific limit state at a given seismic intensity level \(IM = x\) (Eq. 5):
Li and Gardoni (2024) analysed multiple influencing factors (seismic epicentral distance (SD), fault mode (l), and magnitude (M)) of potential source areas in typical cities and developed an urban building seismic risk assessment model considering the coupling effects of multiple factors, as expressed in Eq. 6.
\(P[IM \ge x\left| {PSE} \right.]\) is the seismic hazard probability of urban buildings within the potential seismic source area (PSE) of the city, where the intensity measures exceed a given threshold \(IM \ge x\).
The traditional seismic vulnerability function (Eq. 7) is a correlation model that establishes a structure’s dynamic characteristics, failure state, and seismic intensity parameters. This study combines Eq. 7 with the convolutional seismic risk model (Eq. 8) to propose a risk model for evaluating the seismic risk resilience and vulnerability of typical urban building clusters, as expressed in Eqs. 9–10.
\(\Theta {\kern 1pt} {\kern 1pt} [ \cdot ]\) is the traditional logarithmic normal distribution function. \(\lambda_{{D\left| {IM} \right.}}\) and \(\alpha_{{D\left| {IM} \right.}}\) are the median and logarithmic standard deviation, respectively, of seismic demand D under the influence of the IM. \(\ln \lambda_{c}\) and \(\alpha_{C}\) are the median and logarithmic standard deviation, respectively, of the capacity of urban building portfolios. \(P_{DS}\) is a convolutional model of seismic risk and vulnerability \(\kappa (x)\) based on multiple damage states DSi.
\(P[DS_{{i,{\kern 1pt} {\kern 1pt} updated}} ]\) shows the failure probability of optimized urban buildings in different extended (updated) damage states. \(P[DS_{{i,{\kern 1pt} {\kern 1pt} updated}} \left| {IM_{PSE} } \right.]\) represents the conditional probability of the i-th extended (updated) damage state of the urban structures under the influence of IM in the potential source area (PSE) in a typical city. The damage state is expanded to six levels, and the value of i is an integer between 0 and 5, namely, DS0 (no damage), DS1 (minor damage), DS2 (mild damage), DS3 (general damage), DS4 (severe damage), and DS5 (local failure or collapse). \(m( \cdot )\) and \(G( \cdot )\) are continuous density functions and seismic hazard probability models used to evaluate the seismic risk of urban building portfolios, respectively.
Based on Eqs. 5–10, this study innovatively considers the impact of instrument intensity, the latest version of the Chinese seismic intensity measure (CSIS-20), the time-varying damage effects of urban building portfolios, and the directionality of ground motion on urban seismic risk and building vulnerability. A hazard model considering optimized hybrid intensity measures (OHIM) is proposed to evaluate typical urban buildings’ seismic risk and vulnerability, as expressed in Eqs. 11–12.
where \(OISI_{{t_{i} }}\) is the optimized instrument seismic intensity of the urban building portfolio at time \(t_{i}\). \(sim{\kern 1pt} {\kern 1pt} (t_{i} )\) represents the seismic intensity measured considering the coupling effects of multiple directions of seismic motion at time \(t_{i}\). \(\mu_{1}\) and \(\mu_{2}\) are the logarithmic regression and undetermined parameters, respectively.
The seismic risk and vulnerability assessment model for urban buildings proposed in this study can provide a more refined estimation of building cluster vulnerability and seismic resistance based on traditional macroscopic intensity assessments of large-scale regional building damage. The expanded damage (vulnerability) state comprehensively measures and refines the traditional vulnerability level, contributing positively to membership studies and impacting the ability to build samples with nondamage states at other damage levels.
3 Seismic risk model of typical urban building portfolios
3.1 Seismic risk assessment model of buildings in Dujiangyan city
Earthquakes have caused significant economic losses and casualties in urban buildings. The seismic risk and vulnerability assessment of urban building portfolios is one of the core issues in the study of urban seismic resilience and functional resilience. Improving the seismic resistance of urban building clusters is a hot topic in sustainable development research on cities in different regions worldwide. However, most of the research on earthquake risk and fragility has focused more on estimating the actual earthquake losses of discrete building clusters and less on conducting earthquake hazard and vulnerability analyses for all the buildings in a typical city. Considering the actual damage of typical urban overall building clusters has significant research value for exploring the seismic risk and vulnerability of urban building portfolios.
On May 12, 2008, a strong earthquake with a magnitude of Mw7.9 occurred in Wenchuan, China, affecting more than half of China and multiple regions in Asia (Li et al. 2023). According to data reported by the Japan Meteorological Agency, the seismic waves of this earthquake circled the Earth six times (Li and Zhong 2024). The Wenchuan earthquake severely damaged an area of approximately 500,000 square meters, including ten severely affected areas (cities) and 41 more severely affected counties. This resulted in 69,227 deaths, 17,923 missing persons, and 374,643 injured persons to varying degrees, resulting in economic losses of 845.14 billion (Li and Zhong 2024). After the earthquake, the China Earthquake Administration immediately sent hundreds of earthquake engineering experts, scholars, and projects from different regions worldwide to the disaster area for field disaster research and assessment. The macroseismic intensity distribution was released, as depicted in Fig. 2 (Li and Zhong 2024). Dujiangyan city is 21 km from the epicenter, the overall damage to the city is relatively heavy, and all types of buildings have been damaged to varying degrees. Based on the preliminary investigation conducted by the China Earthquake Administration, the city spans multiple macroseismic intensity zones with various structural types and significant damage features, which can provide favourable basic data for studying seismic resilience and dynamic urban disasters in typical cities. From May to August 2008, the Institute of Engineering Mechanics of the China Earthquake Administration organized more than 30 researchers in the field of seismic engineering, including the author, to form a field inspection team. Detailed field observations were conducted on all buildings in Dujiangyan city, and 8,669 actual earthquake damage samples were collected from various building portfolios.
A damage state assessment was conducted on the urban building cluster sample dataset using the optimized seismic hazard and vulnerability quantification model proposed in this paper. Figure 3 shows the administrative division distribution of a typical city (Dujiangyan). The overall building samples of Dujiangyan city were divided into MMS, RC, BFM, WS, and OB samples. We assessed the damage states of all the urban building clusters, generating the distributions of seismic risk and vulnerability for five typical building portfolios based on the expanded damage state (with the added nondamaged state), as shown in Fig. 4.
Utilizing the updated seismic risk and vulnerability assessment model proposed in this paper, the impact of extended damage states on the seismic risk assessment of urban building clusters was comprehensively considered. The instrumental intensity calculation model was used as an auxiliary indicator for assessing the vulnerability of urban buildings. Fragility judgement and statistical analysis were conducted on 8669 building clusters using the latest version of China’s macrointensity index (CSIS-20). The statistical vulnerability distribution of a typical building portfolio considering updating risk model algorithms was developed, as shown in Fig. 5. According to the distribution of seismic risk and vulnerability of buildings in a typical city (Dujiangyan), the area spans multiple intensity zones. Several buildings have suffered different degrees of damage under multiple seismic intensity measures. The stock of MMS and BFM was relatively large, and more than 50% of the samples were at the DS0 and DS1 levels. The number of RCs is relatively small, and the damage is relatively mild. It is worth noting that the construction quantity of such a structure (RC) is constrained by local economic development. Dujiangyan is a developing city. Therefore, this type of building is relatively less commonly used. The WS damage is more severe than the OB damage is, and the proportion is approximately 29% at the DS5 level.
3.2 Seismic vulnerability model of urban buildings in multiple intensity zones
An earthquake has caused varying degrees of impact and damage to multiple city zones. Significant differences exist in the damage caused by earthquakes of different intensities to urban building portfolios. A detailed study of the damage modes and dynamic disaster mechanisms of urban building clusters in multiple intensity zones significantly contributes to developing earthquake vulnerability and resilience models for urban building portfolios. Using the proposed seismic risk and vulnerability quantification scale and model, seismic intensity (Fig. 2), and urban seismic risk distribution (Figs. 3–4), we conducted vulnerability rating and classification for all building portfolios (8669 buildings) in different intensity zones of Dujiangyan city. To better demonstrate the vulnerability of various structures under the influence of different intensity measures, data from two typical earthquake events in China (the Yushu earthquake in 2010 and the Jiuzhaigou earthquake in 2017) were collected and supplemented. We established the actual disaster matrix of urban building portfolios based on the updated damage status of five typical building clusters, as summarized in Table 1. To derive the variation features of various building clusters at different damage states, a vulnerability plane model of typical urban buildings based on the updated damage ratio (the UDR is the number of samples of typical urban buildings in the updated damage state divided by the total number) was developed using two-dimensional numerical and modal analysis methods, as presented in Fig. 6. Admittedly, the cumulative response of regional building clusters to different intensity measures and damage states has apparent anomalies in terms of their effects. Using the cumulative damage probability calculation model (Eq. 13) and the three-dimensional modal numerical algorithm, numerical calculations and modal damage analysis were conducted on the disaster matrix of the established urban building portfolio. A vulnerability comparison surface based on the optimized exceedance probability (OEP) was developed, as shown in Fig. 7.
where \(OEP_{t}\) is the optimized exceeding probability of the actual earthquake loss of urban buildings in category t and \(P[DS_{i} \le ds_{i} \left| {IM_{j} } \right.]\) represents the cumulative probability of UDR for typical urban building clusters under the influence of hybrid intensity measures at different updated damage states. i and j are integers ranging from 0 to 5 and 6 to 11, respectively.
According to the damage estimation and statistics of building samples in different intensity zones of Dujiangyan city, the number of five types of buildings shows a decreasing trend with increasing intensity. In zone VI, the damage to various structures is relatively mild, and the degree of difference is relatively small. In zoneVII, MMS damage is slightly lighter than RC and BFM, while WS damage is heavier than OB. In zone VIII, the damage similarity between MMS and BFM is relatively high, the damage to WS is relatively severe, and the seismic loss to the RC structure is relatively mild. In zone IX, the damage of MMS was slightly greater than that of RC, and the damage of WS was the most severe. The OB damage was relatively mild. Notably, this type of building includes a portion of wooden frames and composite structures, which improves the seismic resistance of this type of building portfolio. Various urban buildings have suffered severe earthquake damage in zones X and XI. The RC structure indicates excellent seismic resistance. However, approximately 50% of the samples did not collapse in the isoseismal zone. WSs suffered the most severe damage, with approximately 77% experiencing collapse or local failure. It is worth emphasizing that the construction materials of MMS are brittle. A certain number of MMSs with seismic designs in Dujiangyan city still have not failed.
3.3 Vulnerability membership model considering extended damage states
The urban building portfolio suffered various damages during a strong earthquake attack. The damage state is widely recognized as a pivotal fuzzy quantitative indicator for evaluating building portfolios. The damage status and sample proportion distribution of urban building clusters directly affect the disaster matrix and vulnerability function of urban buildings. Nevertheless, the damage states defined by different macroscopic intensity scales have inconsistent features. In combination with the actual damage of typical buildings in Dujiangyan city, this study innovatively expanded the five-level damage quantification scale in the traditional Chinese seismic intensity standard (CSIS), added an assessment level (DS0) of undamaged building samples, and expanded the assessment scale to a six-level damage state. According to the assessment of all the building seismic damage samples (8,669 buildings) in Dujiangyan city, the development of the DS0 level has different degrees of impact on the other damage states. To study the impact of DS0 level samples on the urban building disaster matrix and vulnerability curve, we innovatively proposed a vulnerability membership parameter based on DS0 (VMP, which is the UDR of each damage state divided by the UDR value of the DS0 level) using fuzzy membership theory to estimate the degree of impact between different damage levels. The established disaster matrix for typical urban building clusters was calculated, and a seismic damage state correlation coefficient matrix considering VMP was developed, as noted in Table 2. By combining spline interpolation and conformal regression model algorithms, VMP comparison curves and surface models were generated for five typical urban building clusters under the influence of the overall zone and different optimized intensity measures (zones), as shown in Figs. 8 and 9.
The analysis of matrix, curve, and surface models based on VMP for urban building clusters showed that in the overall urban seismic zone, the membership of DS1- and DS2- level VMP for various building clusters in DS0 is relatively high. The difference in membership parameters indicates an increasing trend with increasing damage state. It is worth emphasizing that the membership degree of the WS at the DS5 level significantly increased, indicating that the damage to this type of structure was relatively severe.
In zone VI, the DS1 level samples of RC and WS have a higher degree of membership in DS0, indicating that the proportion of these two types of urban buildings in DS1 is significantly greater than that in DS0. In zone VII, the VMP similarity between MMS and BFM was relatively high at the DS1 and DS2 levels. However, as the damage state increases, the membership of MMS slightly decreases, and the damage is less severe than that of BFM. In zone VIII, the VMP of BFM at the DS3 level is significantly greater than that at the DS0 level, indicating that many BFMs have undergone damage at the DS3 level. The VMP of the WS at the DS5 level is relatively high, indicating that the sample of collapses in this type of building is slightly greater than that of undamaged buildings. In zone IX, the VMP of BFM at the DS4 level is significantly greater than that at the other DS4 levels, reaching 15.44 times the UDR value of the nondamaged sample, and the damage is relatively severe. RC, OB, and MMS had relatively high membership at the DS3 level, while WS had a significant membership at the DS5 level, indicating that this type of structure was the most severely damaged. Notably, some urban buildings are in an extreme earthquake zone, resulting in the absence of DS0-level samples for BFM, WS, and OB. Therefore, the VPM with the DS0 level has no affiliation with other damage states in this zone. In zone X, the VPM of MMS and RC at the DS4 level was significantly greater. A large number of buildings have experienced DS4-level damage, while the VPM curve and surface of the OB show a slow-increasing trend. In zone XI, the VPM value of MMS at the DS5 level was significantly greater than that of RC, indicating that the MMS damage was significantly more severe than that of RC. The membership index of structural vulnerability is based on the vulnerability level evaluation scale. Therefore, the developed model can be used to estimate the damage caused by other natural disasters to structures, but the impact of different disaster intensity measures on structural damage should be considered.
4 Seismic vulnerability regression and optimized damage index model
4.1 Updated vulnerability regression model
Various nonlinear vulnerability regression models have been used to predict and evaluate regional building cluster seismic risk and damage using probability distribution functions, seismic hazard methods, and reliability theory. Formisano et al. (2023) and Chieffo et al. (2019, 2021a) developed a logarithmic distribution function model (LDFM) considering continuous seismic intensity measures, as expressed in Eq. 14. They used the proposed model to perform regression analysis on the actual seismic damage data of MMS and RC in the historical center of Italy and generated building vulnerability curves based on typical cities and regions. An exponential distribution function model (EDFM) for predicting the seismic vulnerability of RC building clusters was proposed by Del Gaudio et al. (2021, 2019, 2017), as expressed in Eq. 15. They applied the proposed model to assess the seismic vulnerability of typical urban building clusters affected by the L’Aquila earthquake.
\(P(VL_{j} \ge vl_{j} \left| {IM} \right.)\) is the probability of urban building damage reaching or exceeding the given vulnerability level \(vl_{j}\) under the specific continuous intensity measures, with j values ranging from 1 to 5. \(\Lambda [ \cdot ]\) is the logarithmic normal distribution function, and \(\mu\) and \(\sigma\) are the mean value and variance, respectively. \(\tau_{1} ,{\kern 1pt} {\kern 1pt} \tau_{2} \cdots \tau_{n}\) represent characteristic coefficients considering n-dimensional influence factors.
where \({\rm B}[ \cdot ]\) is the exponential distribution function. \(\alpha\) and \(\beta\) are evaluation parameters for urban building clusters. \(\delta_{1} ,{\kern 1pt} {\kern 1pt} \delta_{2} ,{\kern 1pt} {\kern 1pt} \cdots {\kern 1pt} \delta_{n}\) are the uncertainty regression coefficients of the exponential distribution function.
Li et al. (2023) proposed a regression model based on the traditional Gaussian distribution function and applied it to evaluate the structural vulnerability of more than 200 typical earthquakes in China. However, the proposed model ignores the influence of DS0 level samples and does not consider the scale of regional seismic risk assessment, resulting in relatively low accuracy of the established model. This study comprehensively considers the model features of the above distribution functions, combines the Chinese macrointensity scale and the proposed urban building hazard and vulnerability model (Eqs. 7–12), and proposes an updated Gaussian distribution function model (UGFM) based on the damage state and optimizing intensity measures, as expressed in Eq. 16. The nonlinear vulnerability regression model proposed in this paper considers more of the impact of nondamaged building sample sets on the damage probability matrix than do existing models (risk and hazard models) and refines the estimation scale of vulnerability. The proposed model can effectively improve the accuracy of seismic vulnerability and hazard assessment for these five types of urban building clusters. Nonlinear vulnerability fitting of Dujiangyan’s building portfolio dataset was also conducted. The vulnerability regression curves and parameter matrices of five typical urban buildings considering UDR parameters were generated, as shown in Figs. 10, 11, 12, 13, 14, 15 and 16 and Table 3.
The HIM is a hybrid intensity measure. \(\Phi [ \cdot ]\) denotes the updated Gaussian regression function model used to evaluate the seismic vulnerability of urban building clusters. \(\omega_{1} ,{\kern 1pt} {\kern 1pt} \omega_{2} ,{\kern 1pt} {\kern 1pt} \cdots {\kern 1pt} \omega_{n}\) are the uncertainty coefficients. DSi values are integers from 1 to 6.
The 8,669 buildings in Dujiangyan city are classified and counted according to the overall seismic zone and multiple macroseismic intensity zones. Vulnerability regression analysis was conducted on five typical urban building clusters based on the proposed nonlinear regression model. In the overall zone, the distributions of MMS, BFM, and OB were relatively balanced at the different damage levels, and the difference in the multidimensional fitting models was inconspicuous. The EDFM curve of the RC building cluster shows a peak between DS0 and DS1, while the WS curve has low value between DS4 and DS5, indicating that the overall damage to the RC structure is relatively mild, while the WS is relatively heavy. In zone VI, the LDFM of MMS, RC, and WS exhibited maximum values at the DS0 and DS1 levels, while the EDFM predicted slightly more at higher failure levels than did the UGFM. The three types of regression curves of BFM have high similarity, and those of LDFM and UGFM have excellent goodness of fit (greater than 0.9). In zoneVII, the similarity of the vulnerability regression curves for the various urban building clusters is relatively high, showing a slow decreasing trend as the damage level increases. In zone VIII, the peak value of UGFM in the RC is between DS2 and DS3, while that of BFM is approximately at the DS3 level, indicating that the structural damage in the RC is less than that in the BFM. In zone IX, various types of urban building damage significantly increase. The peak values of the EDFM and UGFM curves for MMS, BFM, and WS are located at higher damage states. Notably, the damage prediction peaks of RC and OB are still at the DS3 level, indicating that these structures have excellent seismic resistance and toughness characteristics. In zone X, the EDFM peaks of MMS and RC are greater than those of EDFM and UGFM, and DS4 damage occurs. The BFM curve at the DS5 level was significantly greater than that of RC and MMS curves, indicating that this type of structure causes relatively severe damage. The regression curves of the WS show an increasing trend, indicating that this type of building is severely damaged. In zone XI, serious damage has occurred to various urban buildings, and the various curves show a strict increasing trend. MMS and BFM damage is similar, while WS is more severe than OB. Notably, in the extreme earthquake zone (XI), an increase in the vulnerability curve of the RC is not apparent, indicating that this type of structure has excellent seismic performance.
4.2 Vulnerability model considering the optimized damage index
The seismic damage (vulnerability) index is one of the core indicators for evaluating the seismic risk and vulnerability of urban building portfolios. Lagomarsino and Giovinazzi (2006) proposed a model for calculating the mean failure index based on the European macroscopic intensity standard, as expressed in Eq. 17. A calculation model for the seismic vulnerability index based on the probability mass and cumulative distribution function was developed by Kassem et al. (2023), (El-Maissi et al. 2023), as expressed in Eq. 18. Formisano et al. (2023), Longobardi and Formisano (2022) and Chieffo et al. (2019, 2021a) proposed an earthquake vulnerability model based on multiple influences on seismic damage in urban buildings (Eqs. 19–20) and validated the model using historical urban buildings in Italy.
where \(AF_{I}\) is the average fragility index used to evaluate urban building clusters and \(MSI_{EMS - 98}\) represents macroseismic intensity measures based on the European intensity standard (EMS-98). W is the urban building resilience index, and Vi is the seismic vulnerability index of urban building clusters.
\(p_{k}\) is the failure probability of urban buildings considering damage factor k.
\(Q_{n}\) and \(T_{n}\) are the weights and scores of the n-factors that affect seismic damage to urban buildings, with n values ranging from 1 to w. The SHI is the seismic risk index for urban building portfolios. \(P_{\min }\) and \(P_{\max }\) are the minimum and maximum scores, respectively, of the n-factors that affect urban building clusters.
Using the Chinese macrointensity standard and probability damage model theory, Li and Gardoni (2024) proposed a vulnerability index calculation model for evaluating the seismic risk of regional buildings and bridges. Typical earthquake damage survey data from China were selected to verify the proposed model. However, the structural seismic damage dataset used for model validation neglects the quantification of nondamaged building samples. The assessment of vulnerability levels of engineering structures does not consider the influence of mixed intensities, resulting in insufficient accuracy of established vulnerability index models. Optimizing outdated computational models using updated empirical structured datasets and hazard quantification models has become an urgent scientific issue to be addressed. This paper proposes an updated average damage index (UADI) model based on the extended damage state (level) and the urban building seismic risk model, as expressed in Eq. 21.
\(ELC_{{t,{\kern 1pt} i}}\) is the seismic loss coefficient for the expansion damage state \(DSi\) (\(i \in \left\{ {0,1,2,3,4,5} \right\}\)) of t-type urban building clusters considering hybrid intensity indicators, as noted in Table 4 (tl, al, and ll are the upper, middle, and lower bounds of \(ELC_{{t,{\kern 1pt} i}}\), respectively). \(Q_{t} (DSi\left| {HSI} \right._{j} )\) and \(\sum\limits_{i = 0}^{5} {Q_{t} (DSi\left| {HSI_{j} } \right.)}\) are the number and total number of damaged areas that occur in the extended damage state \(DSi\) of the type t structure in potential seismic source area j of the city under the influence of hybrid seismic intensity measures (HSIs), respectively.
The vulnerability parameter matrix, point cloud, and curve considering UADI are developed considering the actual seismic damage sample data of five typical building portfolios in Dujiangyan, as shown in Table 5 and Figs. 17–18.
The proposed UADI function model is used for damage estimation and model calculations for buildings in Dujiangyan city. The developed matrix, point cloud, and curve indicate the seismic risk and vulnerability of the urban structures in zones with different intensities. The risk and vulnerability assessment results for typical buildings in five types of cities are consistent with actual field earthquake damage observations. The obtained UADI model can provide a positive reference for the development of earthquake risk and vulnerability models for a typical urban building portfolio.
5 Conclusion
This paper studies the seismic risk and vulnerability of typical urban building portfolios. Taking all the buildings in Dujiangyan city affected by the Wenchuan earthquake as a case study, multidimensional structural damage assessment and vulnerability analysis were conducted in combination with the proposed optimized seismic hazard probability model. An innovative quantitative model has been proposed to evaluate the seismic risk and vulnerability of urban building clusters. A new probabilistic risk model for urban building clusters based on multidimensional seismic vulnerability indicators has been developed. The following conclusions were drawn:
-
1.
Using reliability, probabilistic seismic risk, the Bayesian probability probabilistic model, and the traditional seismic fragility function model, a new probabilistic demand and capability model of seismic risk based on updated seismic intensity measures is developed. The traditional damage state and threshold have been expanded, and an earthquake risk and vulnerability assessment model for urban building clusters has been established based on optimized hybrid intensity measures. According to the analysis results of the model, the developed model has more detailed and precise features than historical hazard models.
-
2.
Using the proposed quantitative model of seismic risk, a vulnerability assessment and statistical analysis of all the buildings (8,669 buildings) in Dujiangyan city were conducted. The distributions of urban earthquake risk and building vulnerability are generated based on various basic data from actual field inspection. Using seismic risk and multidimensional damage modal analysis methods, seismic risk and vulnerability models of five types of buildings (multistory masonry structures (MMSs), reinforced concrete structures (RCs), bottom frame seismic wall masonry structures (BFMs), workshop buildings (WSs), and other buildings (OBs)) in Dujiangyan city were developed considering updated damage rates, quantities, and optimized exceeding probability parameters. The analysis results indicate that the developed multidimensional quantitative model can reasonably display the damage modes of buildings in Dujiangyan city overall and in zones with different seismic intensities.
-
3.
Using the developed extended damage state (level), an innovative vulnerability membership parameter (VMP) considering the nondamaged state (DS0) is proposed to estimate the degree of membership of different damage levels to DS0. The results indicate that the DS1 level of most building clusters in lower-intensity zones has a relatively high degree of membership in DS0. With increasing intensity, the VPM range for higher damage levels increases, and the membership in DS0 decreases accordingly.
-
4.
The traditional nonlinear vulnerability regression model is updated, and a multidimensional vulnerability regression comparison curve and parameter matrix based on the overall building portfolio in Dujiangyan city are established. The goodness of fit of more than 68.5% of the UGFMs is more than 0.8%, which indicates that the proposed updating model has a good prediction effect.
-
5.
By combining traditional earthquake damage index models and theories, an updated average damage index (UADI) model has been proposed to evaluate the seismic risk and vulnerability of urban building clusters. Based on the proposed seismic risk and extended structural damage state model, the UADI point cloud and curve of five typical building clusters in Dujiangyan city are developed. According to the identification and analysis of UADI parameters, the developed model can provide a more detailed assessment of the seismic risk and vulnerability of typical urban building portfolios.
This study involved seismic analysis and evaluation of urban building clusters and revealed the damage modes and disaster characteristics of various structures under the influence of different intensity measures. Another crucial finding is that the damage to RC buildings is relatively mild in zones with different seismic intensities. The seismic risk and vulnerability assessment model for urban building clusters established in this paper can provide favourable references for developing relatively reasonable quantitative models for evaluating the seismic resilience and sustainability of typical cities. It is worth emphasizing that the urban building seismic damage samples used for model validation in this paper were distributed at different sites. Additionally, different geological conditions potentially impact the vulnerability of urban buildings. Therefore, the model proposed in this paper can be extended to other cities and regions based on different sites and geological categories. The various structural seismic vulnerability and risk models and indices proposed in this paper provide positive references for seismic risk estimation and prevention of urban building clusters. The research results obtained can provide reasonable references for urban planners and disaster management authorities to revise earthquake risk zoning and structural seismic resistance levels. The structural seismic risk and vulnerability model in this paper was developed based on different intensity measures and updated vulnerability level scales. Therefore, the proposed model can be extrapolated to structural risk and vulnerability assessments of the same seismic intensity in other seismic events.
Abbreviations
- RC:
-
Reinforced concrete
- DS:
-
Damage state
- MMS:
-
Multistory masonry structure
- BFM:
-
Bottom frame seismic wall masonry
- WS:
-
Workshop building
- OB:
-
Other building
- PBEE:
-
Performance-based earthquake engineering
- EDP:
-
Engineering demand parameter
- SD:
-
Seismic epicentral distance
- M:
-
Magnitude
- CSIS:
-
Chinese seismic intensity
- OHIM:
-
Optimized hybrid intensity measures
- SC:
-
Sichuan
- UDR:
-
Updated damage ratio
- OEP:
-
Optimized exceedance probability
- VMP:
-
Vulnerability membership parameter
- LDFM:
-
Logarithmic distribution function model
- EDFM:
-
Exponential distribution function model
- UGFM:
-
Updated Gaussian distribution function model
- HIM:
-
Hybrid intensity measure
- UADI:
-
Updated average damage index
- HSI:
-
Hybrid seismic intensity
References
Acito M, Buzzetti M, Chesi C, Magrinelli E, Milani G (2023) Failures and damages of historical masonry structures induced by 2012 northern and 2016–17 central Italy seismic sequences: critical issues and new perspectives towards seismic prevention. Eng Fail Anal 149:107257. https://doi.org/10.1016/j.engfailanal.2023.107257
Bigdeli A, Emamikoupaei A, Tsavdaridis KD (2023) Probabilistic seismic demand model and optimal intensity measures for mid-rise steel modular building systems (MBS) under near-field ground motions. J Build Eng 67:105916. https://doi.org/10.1016/j.jobe.2023.105916
Biglari M, Formisano A (2020) Damage probability matrices and empirical fragility curves from damage data on masonry buildings after Sarpol-e-zahab and Bam Earthquakes of Iran. Front Built Environ. https://doi.org/10.3389/fbuil.2020.00002
Blagojević N, Brzev S, Petrović M, Borozan J, Bulajić B, Marinković M, Hadzima-Nyarko M, Koković V, Stojadinović B (2023) Residential building stock in Serbia: classification and vulnerability for seismic risk studies. Bull Earthq Eng 21:4315–4383. https://doi.org/10.1007/s10518-023-01676-0
Boakye J, Murphy C, Gardoni P, Kumar R (2022) Which consequences matter in risk analysis and disaster assessment? Int J of Disaster Risk Reduction 71:102740. https://doi.org/10.1016/j.ijdrr.2021.102740
Cardinali V, Tanganelli M, Bento R (2022) A hybrid approach for the seismic vulnerability assessment of the modern residential masonry buildings. Int J Disaster Risk Reduction 79:103193. https://doi.org/10.1016/j.ijdrr.2022.103193
Chen Y, Song J, Zhong S, Liu Z, Gao W (2022) Effect of destructive earthquake on the population-economy-space urbanization at county level-a case study on Dujiangyan county, China. Sustain Cities Soc 76:103345. https://doi.org/10.1016/j.scs.2021.103345
Chieffo N, Formisano A (2019) Geo-Hazard-Based approach for the estimation of seismic vulnerability and damage scenarios of the old city of Senerchia (Avellino, Italy). Geosciences 9(59):9020059. https://doi.org/10.3390/geosciences9020059
Chieffo N, Clementi F, Formisano A, Lenci S (2019) Comparative fragility methods for seismic assessment of masonry buildings located in Muccia (Italy). J Build Eng 25:100813. https://doi.org/10.1016/j.jobe.2019.100813
Chieffo N, Mosoarca M, Formisano A, Lourenco PB (2021a) The effect of ground motion vertical component on the seismic response of historical masonry buildings: the case study of the Banloc Castle in Romania. Eng Struct 249:113346. https://doi.org/10.1016/j.engstruct.2021.113346
Chieffo N, Formisano A, Miguel Ferreira T (2021b) Damage scenario-based approach and retrofitting strategies for seismic risk mitigation: an application to the historical Centre of Sant’ Antimo (Italy). Eur J Environ Civ Eng 25(11):1929–1948. https://doi.org/10.1080/19648189.2019.1596164
Chieffo N, Formisano A, Landolfo R, Milani G (2022) A vulnerability index based-approach for the historical centre of the city of Latronico (Potenza, Southern Italy). Eng Fail Anal 136:106207. https://doi.org/10.1016/j.engfailanal.2022.106207
Chieffo N, Formisano A, Lourenço PB (2023) Seismic vulnerability procedures for historical masonry structural aggregates: analysis of the historical centre of Castelpoto (South Italy). Structures 48:852–866. https://doi.org/10.1016/j.istruc.2023.01.022
China Earthquake Administration and National Bureau of Statistics (2005) Compilation of loss assessment for earthquake disasters in mainland China (2001–2005) [M]. Earthquake Press, Beijing
China Earthquake Administration and National Bureau of Statistics (1996) Compilation of loss assessment for earthquake disasters in mainland China (1990–1995) [M]. Earthquake Press, Beijing
China Earthquake Administration and National Bureau of Statistics (2001) Compilation of loss assessment for earthquake disasters in mainland China (1996–2000) [M]. Earthquake Press, Beijing
Del Gaudio C, Martino GD, Ludovico MD, Manfredi G, Prota A, Ricci P, Verderame GM (2017) Empirical fragility curves from damage data on RC buildings after the 2009 L’Aquila earthquake. Bull Earthq Eng 15:1425–1450. https://doi.org/10.1007/s10518-016-0026-1
Del Gaudio C, Martino GD, Ludovico MD, Manfredi G, Prota A, Ricci P, Verderame GM (2019) Empirical fragility curves for masonry buildings after the 2009 L’Aquila, Italy, earthquake. Bull Earthq Eng 17:6301–6330. https://doi.org/10.1007/s10518-019-00683-4
Del Gaudio C, Scala SA, Ricci P, Verderame GM (2021) Evolution of the seismic vulnerability of masonry buildings based on the damage data from L’Aquila 2009 event. Bull Earthq Eng 19:4435–4470. https://doi.org/10.1007/s10518-021-01132-x
Di Ludovico M, Cattari S, Verderame G, Vecchio CD, Ottonelli D, Del Gaudio C, Prota A, Lagomarsino S (2023) Fragility curves of Italian school buildings: derivation from L’Aquila 2009 earthquake damage via observational and heuristic approaches. Bull Earthq Eng 21:397–432. https://doi.org/10.1007/s10518-022-01535-4
Du A, Wang X, Xie Y, Dong Y (2023) Regional seismic risk and resilience assessment: methodological development, applicability, and future research needs—an earthquake engineering perspective. Reliab Eng Syst Saf 233:109104. https://doi.org/10.1016/j.ress.2023.109104
El-Maissi AM, Argyroudis SA, Kassem MM, Nazri FM (2023) Integrated seismic vulnerability assessment of road network in complex built environment toward more resilient cities. Sustain Cities Soc 89:104363. https://doi.org/10.1016/j.scs.2022.104363
Eudave RR, Ferreira TM, Vicente R (2022) Parameter-based seismic vulnerability assessment of Mexican historical buildings: insights, suitability, and uncertainty treatment. Int J Disaster Risk Reduction 74:102909. https://doi.org/10.1016/j.ijdrr.2022.102909
Follador V, Carpanese P, Donà M, da Porto F (2023) Effect of retrofit interventions on seismic fragility of Italian residential masonry buildings. Int J Disaster Risk Reduction 91:103668. https://doi.org/10.1016/j.ijdrr.2023.103668
Fontenele A, Campos V, Matos AM, Mesquita E (2023) A vulnerability index formulation for historic facades assessment. J Build Eng 64:105552. https://doi.org/10.1016/j.jobe.2022.105552
Formisano A, Chieffo N (2023) Seismic damage scenarios induced by site effects on masonry clustered buildings: a case study in South Italy. Int J Archit Heritage 17:262–283. https://doi.org/10.1080/15583058.2022.2104143
Formisano A, Chieffo N, Asteris PG, Lourenço (2023) Seismic risk scenario for the historical centre of castelpoto in Southern Italy. Earthquake Eng Struct Dyn 52(9):2573–2860. https://doi.org/10.1002/eqe.3887
Gardoni P, Guevara-Lopez F, Contento A (2016) The life profitability method (LPM): a financial approach to engineering decisions. Struct Saf 63:11–20. https://doi.org/10.1016/j.strusafe.2016.06.006
GB/T 17742 (1999) The Chinese seismic intensity scale. (in Chinese)
GB/T 17742 (2008) The Chinese seismic intensity scale. (in Chinese)
GB/T 17742 (2020) The Chinese seismic intensity scale. (in Chinese)
Gioiella L, Morici M, Dall’Asta A (2023) Empirical predictive model for seismic damage and economic losses of Italian school building heritage. Int J Disaster Risk Reduct 91:103631. https://doi.org/10.1016/j.ijdrr.2023.103631
Gong MS, Lin SB, Sun JJ, Li SY, Dai JW, Xie LL (2015) Seismic intensity map and typical structural damage of 2010 Ms 7.1 Yushu earthquake in China. Nat Hazards 77:847–866. https://doi.org/10.1007/s11069-015-1631-z
Hu YX (2006) Earthquake Engineering. Earthquake Press, Beijing
Iervolino I (2022) Asymptotic behavior of seismic hazard curves. Struct Saf 99:102264. https://doi.org/10.1016/j.strusafe.2022.102264
Jiménez B, Saloustros S, Pela L (2021) Seismic vulnerability index method for hybrid timber–masonry structures. Numerical calibration and application to the city of Valparaíso Chile. J Build Eng 44:103185. https://doi.org/10.1016/j.jobe.2021.103185
Kalantari M, Firuzi E, Ahmadipour M, Sorooshian S (2023) Estimating annualized earthquake loss for residential buildings in Tehran, Iran. Bull Earthq Eng 21:2259–2280. https://doi.org/10.1007/s10518-022-01604-8
Kassem MM, Nazri FM, Farsangi EN, Ozturk B (2023) Development of a uniform seismic vulnerability index framework for reinforced concrete building typology. J Build Eng 47:103838. https://doi.org/10.1016/j.jobe.2021.103838
Kazemi F, Asgarkhani N, Jankowski R (2023) Machine learning-based seismic fragility and seismic vulnerability assessment of reinforced concrete structures. Soil Dyn Earthq Eng 166:107761. https://doi.org/10.1016/j.soildyn.2023.107761
Kohns J, Stempniewski L, Stark A (2022) Fragility functions for reinforced concrete structures based on multiscale approach for earthquake damage criteria. Buildings 12:1253. https://doi.org/10.3390/buildings12081253
Lagomarsino S, Giovinazzin S (2006) Macroseismic and mechanical models for the vulnerability and damage assessment of current buildings. Bull Earthq Eng 4:415–443. https://doi.org/10.1007/s10518-006-9024-z
Li SQ (2024a) Improved seismic intensity measures and regional structural risk estimation models. Soil Dyn Earthq Eng 176:108256. https://doi.org/10.1016/j.soildyn.2023.108256
Li SQ (2024b) A simplified prediction model of structural seismic vulnerability considering a multivariate fuzzy membership algorithm. J Earthquake Eng 28:707–730. https://doi.org/10.1080/13632469.2023.2217945
Li SQ (2024c) Comparison of RC girder bridge and building vulnerability considering empirical seismic damage. Ain Shams Eng J 15:102287. https://doi.org/10.1016/j.asej.2023.102287
Li SQ, Formisano A (2023) Updated empirical vulnerability model considering the seismic damage of typical structures. Bull Earthq Eng. https://doi.org/10.1007/s10518-023-01814-8
Li SQ, Gardoni P (2024) Seismic loss assessment for regional building portfolios considering empirical seismic vulnerability functions. Bull Earthq Eng 22:487–517. https://doi.org/10.1007/s10518-023-01793-w
Li SQ, Zhong J (2024) Development of a seismic vulnerability and risk model for typical bridges considering innovative intensity measures. Eng Struct 302:117431. https://doi.org/10.1016/j.engstruct.2023.117431
Li SQ, Liu HB, Farsangi EN, Du K (2023) Seismic fragility estimation considering field inspection of reinforced concrete girder bridges. Struct Infrastruct Eng. https://doi.org/10.1080/15732479.2023.2208565
Li SQ, Li YR, Han JC, Qin PF, Du K (2024a) Seismic hazard models for typical urban masonry structures considering optimized regression algorithms. Bullet Earthq Eng. https://doi.org/10.1007/s10518-024-01879-z
Li SQ, Du K, Li YR, Han JC, Qin PF, Liu HB (2024b) Seismic vulnerability estimation of RC structures considering empirical and numerical simulation methods. Archiv Civil Mech Eng 24(2):68. https://doi.org/10.1007/s43452-024-00874-0
Longobardi G, Formisano A (2022) Seismic vulnerability assessment and consolidation techniques of ancient masonry buildings: the case study of a Neapolitan Masseria. Eng Fail Anal 138:106306. https://doi.org/10.1016/j.engfailanal.2022.106306
Luo H, Paal SG (2019) A locally weighted machine learning model for generalized prediction of drift capacity in seismic vulnerability assessments. Comput Aided Civil Infrastruct Eng 34:935–950. https://doi.org/10.1111/mice.12456
Mai C, Konakli K, Sudret B (2017) Seismic fragility curves for structures using non-parametric representations. Front Struct Civ Eng 11(2):169–186. https://doi.org/10.1007/s11709-017-0385-y
Manfredi V, Masi A, Nicodemo G, Digrisolo A (2023) Seismic fragility curves for the Italian RC residential buildings based on non-linear dynamic analyses. Bull Earthq Eng 21:2173–2214. https://doi.org/10.1007/s10518-022-01605-7
Meyers-Angulo JE, Martínez-Guevas S, Gaspar-Escribano JM (2023) Classifying buildings according to seismic vulnerability using Cluster-ANN techniques: application to the city of Murcia, Spain. Bull Earthq Eng 21:3581–3622. https://doi.org/10.1007/s10518-023-01671-5
Mouloud H, Chaker A, Nassim H, Lebdioui S, Rodrigues H, Agius MR (2023) Post-earthquake damage classification and assessment: case study of the residential buildings after the Mw = 5 earthquake in Mila city, Northeast Algeria on August 7, 2020. Bull Earthq Eng 21:849–891. https://doi.org/10.1007/s10518-022-01568-9
Ornthammarath T, Chua CT, Suppasri A, Foytong P (2023) Seismic damage and comparison of fragility functions of public and residential buildings damaged by the 2014 Mae Lao (Northern Thailand) earthquake. Earthq Spectra 39(1):126–147. https://doi.org/10.1177/87552930221131830
Rezaei S, Dolatshahi KM, Asjodi AH (2023) Multivariable fragility curves for unreinforced masonry walls. Bull Earthq Eng 21:3357–3398. https://doi.org/10.1007/s10518-023-01649-3
Rosti A, Smerzini C, Paolucci R, Penna A, Rota (2023) Validation of physics-based ground shaking scenarios for empirical fragility studies: the case of the 2009 L’Aquila Earthquake. Bulletin Earthquake Eng 21:95–123. https://doi.org/10.1007/s10518-022-01554-1
Ruggieri S, Porco F, Uva G (2020) A practical approach for estimating the floor deformability in existing RC buildings: evaluation of the effects in the structural response and seismic fragility. Bull Earthq Eng 18:2083–2113. https://doi.org/10.1007/s10518-019-00774-2
Ruggieri S, Cardellicchio A, Leggieri V, Uva G (2021) Machine-learning based vulnerability analysis of existing buildings. Autom Constr 132:103936. https://doi.org/10.1016/j.autcon.2021.103936
Ruggieri S, Calò M, Cardellicchio A, Uva G (2022) Analytical-mechanical based framework for seismic overall fragility analysis of existing RC buildings in town compartments. Bull Earthq Eng 20:8179–8216. https://doi.org/10.1007/s10518-022-01516-7
Sandoli A, Pacella G, Calderoni B, Brandonisio G, Lignola GP, Prota A (2022) Predictive hybrid fragility models for urban scale seismic assessment: a case study in Basilicata Region (Italy). Bull Earthq Eng 21:1047–1077. https://doi.org/10.1007/s10518-022-01569-8
Sandoli A, Brandonisio G, Lignola GP, Prota A, Fabbrocino G (2023) Seismic fragility matrices for large scale probabilistic structural safety assessment. Soil Dyn Earthq Eng 171:107963. https://doi.org/10.1016/j.soildyn.2023.107963
Scala SA, Del Gaudio C, Verderame GM (2022) Influence of construction age on seismic vulnerability of masonry buildings damaged after 2009 L’Aquila earthquake. Soil Dyn Earthq Eng 157:107199. https://doi.org/10.1016/j.soildyn.2022.107199
Sharma M, Singh Y, Burton HV (2023) Parametric study on the collapse probability of modern reinforced concrete frames with infills. Earthq Spectra 39(2):772–798. https://doi.org/10.1177/87552930231156462
Shrestha SR, Orchiston CHR, Elwood KJ, Johnston DM, Becker JS, Tomassi I (2022) Understanding the wider social and economic context of post-earthquake cordons: a comparative case study between Christchurch, Aotearoa (New Zealand) and L’Aquila, Italy. Earthq Spectra 38(4):2731–2753. https://doi.org/10.1177/87552930221091593
Sun BT, Zhang GX (2018) Study on vulnerability matrices of masonry buildings of mainland China. Earthq Eng Eng Vib 17(2):251–259. https://doi.org/10.1007/s11803-018-0439-8
Surana M, Ghosh A, Baldev D (2022) Seismic features and vulnerability of traditional building practices in the Himalayan State, Himachal Pradesh, India. J Build Eng 62:105376. https://doi.org/10.1016/j.jobe.2022.105376
Tabandeh A, Gardoni P (2014) Probabilistic capacity models and fragility estimates for RC columns retrofitted with FRP composites. Eng Struct 74:13–22. https://doi.org/10.1016/j.engstruct.2014.05.005
Tekeste GG, Correia AA, Costa AG (2023) Bayesian updating of seismic fragility curves through experimental tests. Bull Earthq Eng 21:1943–1976. https://doi.org/10.1007/s10518-022-01589-4
Xi J (2022) Relationship between the organizational structure in implementing post-disaster housing reconstruction and outcome characteristics: a study on urban dujiangyan after the Wenchuan Earthquake. Int J Disaster Risk Reduction 80:103221. https://doi.org/10.1016/j.ijdrr.2022.103221
Xu H, Wang L, Li Y, Huang L, Yin L (2019) Critical Chinese government behavior for swift housing reconstruction programme—the case of Dujiangyan following Wenchuan Earthquake. Int J Disaster Risk Reduction 41:101307. https://doi.org/10.1016/j.ijdrr.2019.101307
Yang T, Yuan X, Zhong J, Yuan W (2023) Near-fault pulse seismic ductility spectra for bridge columns based on machine learning. Soil Dyn Earthq Eng 164:107582. https://doi.org/10.1016/j.soildyn.2022.107582
Yazdanpanah O, Formisano A, Chang M, Mohebi B (2021) Fragility curves for seismic damage assessment in regular and irregular MRFs using improved wavelet-based damage index. Measurement 182:109558. https://doi.org/10.1016/j.measurement.2021.109558
Yoshida I, Nakamura T, Au SK (2023) Bayesian updating of model parameters using adaptive Gaussian process regression and particle filter. Struct Saf 102:102328. https://doi.org/10.1016/j.strusafe.2023.102328
Zhang H, Cheng X, Li Y, He D, Du X (2023) Rapid seismic damage state assessment of RC frames using machine learning methods. J Build Eng 65:105797. https://doi.org/10.1016/j.jobe.2022.105797
Zhong J, Zhu Y, Mangalathu S, Gao K (2023a) Probabilistic curvature-and-drift limit states predictive models of high-strength bridge columns. Eng Struct 295:116859. https://doi.org/10.1016/j.engstruct.2023.116859
Zhong J, Shi L, Jeon JS (2023b) Probabilistic Seismic drift-based capacity model of unbonded prestressed reinforced concrete columns: prediction model and dispersion. Soil Dyn Earthq Eng 174:108211. https://doi.org/10.1016/j.soildyn.2023.108211
Zhong J, Zhu Y, Zheng X, Han Q (2023c) Multivariable probabilistic seismic demand models for parametric fragility prediction of isolated bridges portfolios under pulse-like GMs. Eng Struct 292:116517. https://doi.org/10.1016/j.engstruct.2023.116517
Acknowledgements
This paper’s structural damage sample data were derived from the earthquake field inspection database of the Institute of Engineering Mechanics of the China Earthquake Administration (IEM). I would like to express my sincere gratitude to the IEM.
Funding
The research described in this paper was financially supported by the Basic Scientific Research Business Expenses of Provincial Universities in Heilongjiang Province (2022-KYYWF-1056), the Scientific Research Fund of Institute of Engineering Mechanics, China Earthquake Administration (Grant No. 2023D39), and a project funded by Heilongjiang Postdoctoral Science Foundation (LBH-Z22294), China.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no conflict of interest, ethics, or otherwise. Confirm informed consent.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Li, SQ. Seismic risk and vulnerability models considering typical urban building portfolios. Bull Earthquake Eng 22, 2867–2902 (2024). https://doi.org/10.1007/s10518-024-01880-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10518-024-01880-6