Abstract
The plastic zones of crack tips play a significant role in the fracture behavior of material. This paper proposes a semi-analytic solution for the plastic zones and stress distribution of an infinite space with multiple cracks and inhomogeneous inclusions under remote stress. In this solution, cracks can be treated as a distribution of edge dislocations with unknown densities according to the distributed dislocation technique, while inhomogeneous inclusions can be modeled as homogeneous inclusions with initial eigenstrain plus the unknown equivalent eigenstrain by using the equivalent inclusion method. These unknowns can be obtained by using the conjugate gradient method. The plastic zones ahead of crack tips are one-dimensional slender strips, and their sizes can be determined by canceling the stress intensity factor (SIF) due to the closure stress and that due to the applied load based on the Dugdale model of small-scale yielding. It is found that the plastic zones of crack tips are significantly affected by Young’s modulus and the positions of inhomogeneous inclusions.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Kachanov, M.: Elastic solids with many cracks—a simple method of analysis. Int. J. Solids Struct. 23(1), 23–43 (1987)
Xiao, Z.M., Yan, J., Chen, B.J.: Electro-elastic stress analysis for a Zener–Stroh crack interacting with a coated inclusion in a piezoelectric solid. Acta Mech. 171(1–2), 29–40 (2004)
Fang, Q.H., Liu, Y.W.: Size-dependent interaction between an edge dislocation and a nanoscale inhomogeneity with interface effects. Acta Mater. 54(16), 4213–20 (2006)
Fang, Q.H., Jin, B., Liu, Y., Liu, Y.W.: Interaction between screw dislocations and inclusions with imperfect interfaces in fiber-reinforced composites. Acta Mech. 203(1–2), 113–25 (2009)
Li, Z., Li, Y., Sun, J., Feng, X.Q.: An approximate continuum theory for interaction between dislocation and inhomogeneity of any shape and properties. J. Appl. Phys. 109(11), 113529 (2011)
Zhou, K., Wei, R.B.: Modeling cracks and inclusions near surfaces under contact loading. Int. J. Mech. Sci. 83, 163–71 (2014)
Zhou, K., Wei, R.B.: Multiple cracks in a half-space under contact loading. Acta Mech. 225(4–5), 1487–502 (2014)
Dong, Q.B., Zhou, K.: Multiple inhomogeneous inclusions and cracks in a half space under elastohydrodynamic lubrication contact. Int. J. Appl. Mech. 7(1), 1550003 (2015)
Dong, Q.B., Zhou, K.: Elastohydrodynamic lubrication modeling for materials with multiple cracks. Acta Mech. 225(12), 3395–408 (2014)
Wang, X., Zhou, K.: An inclusion of arbitrary shape in an infinite or semi-infinite isotropic multilayered plate. Int. J. Appl. Mech. 6(1), 1450001 (2014)
Zhou, K.: Elastic field and effective moduli of periodic composites with arbitrary inhomogeneity distribution. Acta Mech. 223(2), 293–308 (2012)
Zhou, K., Wei, R.B., Bi, G.J., Wang, X., Song, B., Feng, X.Q.: Semi-analytic solution of multiple inhomogeneous inclusions and cracks in an infinite space. Int. J. Comput. Methods 12(1), 1550002 (2015)
Tao, Y.S., Fang, Q.H., Zeng, X., Liu, Y.W.: Influence of dislocation on interaction between a crack and a circular inhomogeneity. Int. J. Mech. Sci. 80, 47–53 (2014)
Khan, S.M.A., Khraisheh, M.K.: Analysis of mixed mode crack initiation angles under various loading conditions. Eng. Fract. Mech. 67(5), 397–419 (2000)
Khan, S.M.A., Khraisheh, M.K.: A new criterion for mixed mode fracture initiation based on the crack tip plastic core region. Int. J. Plast. 20(1), 55–84 (2004)
Bian, L.C., Kim, K.S.: The minimum plastic zone radius criterion for crack initiation direction applied to surface cracks and through-cracks under mixed mode loading. Int. J. Fatigue 26(11), 1169–78 (2004)
Golos, K., Wasiluk, B.: Role of plastic zone in crack growth direction criterion under mixed mode loading. Int. J. Fract. 102(4), 341–53 (2000)
Achenbach, J.D., Keer, L.M., Khetan, R.P., Chen, S.H.: Loss of Adhesion at the Tip of an Interface Crack. J. Elast. 9(4), 397–424 (1979)
Irwin, G.: Linear fracture mechanics, fracture transition, and fracture control. Eng. Fract. Mech. 1(2), 241–57 (1968)
Dugdale, D.S.: Yielding of steel sheets containing slits. J. Mech. Phys. Solids 8(2), 100–4 (1960)
Hoh, H.J., Xiao, Z.M., Luo, J.: On the plastic zone size and crack tip opening displacement of a Dugdale crack interacting with a circular inclusion. Acta Mech. 210(3–4), 305–14 (2010)
Hoh, H.J., Xiao, Z.M., Luo, J.: On the plastic zone size and CTOD study for a Zener–Stroh crack interacting with a circular inclusion. Acta Mech. 220(1–4), 155–65 (2011)
Yi, D.K., Xiao, Z.M., Zhuang, J., Sridhar, I.: On the plastic zone size and crack tip opening displacement of a sub-interface crack in an infinite bi-material plate. Philos. Mag. 91(26), 3456–72 (2011)
Yi, D.K., Xiao, Z.M., Tan, S.K.: On the plastic zone size and the crack tip opening displacement of an interface crack between two dissimilar materials. Int. J. Fract. 176(1), 97–104 (2012)
Hoh, H.J., Xiao, Z.M., Luo, J.: Plastic zone size and crack tip opening displacement of a Dugdale crack interacting with a coated circular inclusion. Philos. Mag. 90(26), 3511–30 (2010)
Fan, M., Xiao, Z.M., Luo, J.: On the plastic zone correction of a Zener–Stroh crack interacting with a nearby inhomogeneity and an edge dislocation. Acta Mech. 226(12), 4173–88 (2015)
Fan, M., Yi, D., Xiao, Z.: An interfacial arc-shaped Zener–Stroh crack due to inclusion-matrix debonding in composites. Acta Mech. 225(3), 909–18 (2014)
Fan, M., Yi, D.K., Xiao, Z.M.: Elastic–Plastic fracture behavior analysis on a Griffith crack in the cylindrical three-phase composites with generalized Irwin model. Int. J. Appl. Mech. 6(4), 1450045 (2014)
Fan, M., Yi, D.K., Xiao, Z.M.: Elastic–plastic stress investigation for an arc-shaped interface crack in composite material. Int. J. Mech. Sci. 83, 104–11 (2014)
Fan, M., Yi, D.K., Xiao, Z.M.: A Zener–Stroh crack in fiber-reinforced composites with generalized Irwin plastic zone correction. Int. J. Mech. Sci. 82, 81–9 (2014)
Fan, M., Yi, D.K., Xiao, Z.M.: Generalized Irwin plastic zone correction for a Griffith crack near a coated-circular inclusion. Int. J. Damage Mech. 24(5), 663–82 (2015)
Fan, M., Yi, D.K., Xiao, Z.M.: Fracture behavior investigation on an arbitrarily oriented sub-interface Zener–Stroh crack. Acta Mech. 226(5), 1591–603 (2015)
Jing, P.H., Khraishi, T., Gorbatikh, L.: Closed-form solutions for the mode II crack tip plastic zone shape. Int. J. Fract. 122(3–4), L137–L42 (2003)
Feng, X.Q., Li, H.Y., Yu, S.W.: A simple method for calculating interaction of numerous microcracks and its applications. Int. J. Solids Struct. 40(2), 447–64 (2003)
Anderson, T.L., Anderson, T.: Fracture Mechanics: Fundamentals and Applications. CRC Press, Boca Raton (2005)
Murakami, Y.: Stress Intensity Factors Handbook, 1st edn. Pergamon, Oxford (1987)
Acknowledgements
The authors acknowledge financial support by Singapore Maritime Institute (Grant No: SMI-2014-MA11) and the National Natural Science Foundation of China (Grant No: 11472200).
Author information
Authors and Affiliations
Corresponding author
Additional information
This paper is dedicated to the memory of Franz Ziegler
Rights and permissions
About this article
Cite this article
Yang, J., Fan, Q., Zeng, L. et al. On the plastic zone sizes of cracks interacting with multiple inhomogeneous inclusions in an infinite space. Acta Mech 229, 497–514 (2018). https://doi.org/10.1007/s00707-017-1983-4
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-017-1983-4