Abstract
Antibody drugs have been used to treat a number of diseases successfully. Producing antibodies with high yield and quality is necessary for clinical applications of antibodies. For a candidate molecule, optimization of a vector to produce sufficient yield and an accurate primary structure is indispensable in the early stage of the production process development. It is especially important to maintain the fidelity of N-terminal sequence. In order to produce antibodies with a high yield and accurate N-terminal, the expression vector was systematically optimized in this study. First, the heavy chain and light chain were co-expressed in Chinese hamster ovary (CHO) cells with different signal peptides. Mass spectrometry (MS) revealed that signal peptides Esp-K, Bsp-H, and 8Hsp-H were accurately deleted from mature antibodies. Further, the yield was doubled by codon optimization and increased by 50% with the presence of untranslated regions (UTR). The combination of UTR with optimal codon and signal peptide to form an expression vector resulted in yield improvement of 150% and correct N-terminal sequences. Moreover, the main product peak was above 98% as assessed by size-exclusion chromatography (SEC). Additionally, the bioactivity of products made from optimized transient gene expression (TGE) was almost identical to the standard sample. The production efficiency and product quality from the identified TGE optimization strategy was further demonstrated through application to two other antibodies. The expression level of SGE (stable gene expression) can also be improved effectively with this optimization strategy. In conclusion, vector optimization via combination of optimized signal peptide, codon, and UTR is an alternative approach for efficient antibody production with high fidelity N-terminal sequence in CHO cells.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
The unique combination of high affinity, remarkable specificity, and long half-life make monoclonal antibodies (MAbs) successful in the treatment of diseases including bacterial infections, autoimmune disorders, and cancer (Elgundi et al. 2016; Strohl 2017). The majority of these antibodies are produced by recombinant DNA technology in mammalian cells (Birch and Racher 2006; Kunert and Reinhart 2016). The process of therapeutic drug production must meet productivity, quality, and safety criteria (Gaughan 2016; Li et al. 2010).
MAb production in mammalian cells can be performed through either transient gene expression (TGE) or stable gene expression (SGE). Transient expression allows quick production of small amounts of antibodies for testing during the early stages of drug discovery (Ho et al. 2013; Zhang et al. 2017). Stable expression process is more widely used in large-scale industrial production (Ho et al. 2013). Currently, the highest yield for transient expression is around 1 g/L, but 12 g/L can be obtained by stable expression (Frenzel et al. 2013; Kim et al. 2012).
The productivity of antibody expression involves multiple factors. For transient expression, the cell culture media, gene delivery reagents, host cell line, and expression vector are the decisive factors for yield (You et al. 2013). For high-yield expression in a stable and high-producing cell line, the most important factors are appropriate host cell line, an efficient vector, and a good selection protocol (Jostock and Knopf 2012).
Host cell line and expression vector are important for both transient expression and stable expression. The CHO cell line, due to its good performance in protein folding, secretion, and post-translational modification, is the most commonly used host cell line for both transient and stable expression. To achieve high levels of gene expression, vectors such as pTT5 usually have strong promoters (e.g., the CMV promoter) to drive expression of the antibody genes (Durocher et al. 2002). The pTT5 vector has also included favorable RNA processing signals such as polyA tail, presence of an intron to encourage export from the nucleus, and a splice site to remove this intron (Birch and Racher 2006). A high mRNA level, obtained by strong promoters and polyA tail, is important for high-yield expression. In addition to strong promoters and a polyA tail on the plasmid, 3′ untranslated regions (UTR) are included at the 3′ end of the codoning sequence to stablize the mRNA (Kuersten and Goodwin 2003).
In translation, mRNA produced by transcription is decoded by a ribosome complex to produce a specific amino acid chain, or polypeptide. Optimization of codon usage for CHO (Chung et al. 2013) and using 5′ UTR (Araujo et al. 2012) effectively improved yield by speeding up translation processing. The choice of synonymous codons in many species is strongly biased. There is a correlation between high expression and the use of selective codons in a given organism (Brandis and Hughes 2016). Efficient expression of the codon-optimized gene can be attributed to two factors: first, the abundance of isoacceptor tRNAs and modified nucleotides at the anticodon wobble position available in a host; second, the formation of a secondary structure of the transcripts favorable for translation (Kanaya et al. 2001; Nakamura et al. 2000). In eukaryotic cells, translation of cellular mRNA is generally mediated by a “cap” at the 5′ end of mRNA upstream of the coding sequence in UTR which is responsible for interaction of the messenger RNA with the ribosome (Lopez-Lastra et al. 2005).
In addition to mRNA levels and translation, the translocation of secretory proteins into the lumen of the endoplasmic reticulum (ER) is a limiting step. It has been demonstrated by many labs that alternative signal peptides can lead to increased protein secretion (Knappskog et al. 2007; Kober et al. 2013; Zhang et al. 2005).
Besides productivity, high quality is required for safety. First and foremost, the primary structure of protein must be accurately maintained. Excess amino acid residues in the antibody may be harmful for the patient. Appropriate signal sequences are used to target the heavy and light chain polypeptides to the correct part of the secretory pathway. Further, use of these appropriate sequences results in the correct cleavage to maintain an accurate N-terminal (Gibson et al. 2017; Nielsen et al. 1997a b). Optimization of signal peptides is also essential in establishing the manufacturing process for antibody production (Gibson et al. 2017; Kober et al. 2013).
The humanized antibody, B45 hAb against hepatitis B virus (HBV), showed therapeutic efficacy in our previous experiments in animal models (Luo et al. 2016). In order to construct a vector for efficient production of B45 hAb, the coding sequence, including appropriate codon and signal peptide, were optimized separately and then combined. Subsequently, a UTR was added to the ends of the coding sequence to form an optimal vector. The optimized construct architecture for vector resulted in production enhancement and accurate N-terminal sequence caused by correct cleavage. In order to validate the applicability of this strategy, the strategy was applied to optimize expression of two other antibodies, 37 hAb against hemaglutinin of H5N1 virus (Luo et al. 2008) and Herceptin against the breast cancer receptor HER2. Similar results were obtained.
Materials and methods
Vector construction and plasmid DNA preparation
The primary DNA fragments of variable regions of B45 and H37 were isolated using a phage display library (Luo et al. 2008, 2016). The cDNA of Herceptin from NCBI was made by Genewiz. The cDNA of the human IgG 1 constant regions were obtained from a human cDNA library. All sequences of tested antibodies are listed in Table 1. All DNA fragments post codon optimization were synthesized by Genewiz. The variable regions were fused to the constant regions of human IgG1 HC or kappa LC by overlap extension PCR. Each antibody HC and LC was fused with different signal peptides and inserted into pTT5 at EcoR I/BamH I. The signal peptides used are shown in Table 1. Plasmid DNA was amplified in DH5α (TianGen) and purified according to a protocol described in a previous study (You et al. 2013).
Signal peptide optimization
To analyze the secretion efficiency and cleavage, signal peptides listed in Table 2 were fused at the 5′ primer of codoning sequence. The plasmid with chimeric signal peptide was transfected into CHO cells. Culture media was sampled each day for protein quantification. Three replicates of each tests were performed to reduce systematic errors.
Antibody splice sites were predicted by the Signal P 4.1 Server, a web server that predicts the location of signal peptide cleavage sites in amino acid sequences from different organisms (http://www.cbs.dtu.dk/services/SignalP/) (Petersen et al. 2011).
Cell culture and transfection
CHO-S cells were obtained from Gibco and maintained in 125-mL shake flasks (Corning) with SFM 4 (HyClone), which were supplemented with 4 mM L-glutamine, 0.1 μM HT (hypoxanthine and thymidine, Sigma), and 1 g/L PF68 (Sigma). Cultures were shaken at 110 rpm on an orbital shaker with a rotational diameter of 2.5 cm (Kuhner AG, Birsfelden, Switzerland) in the presence of 37 °C, 5% CO2, and 75% humidity. 15 mL cells (2 × 106 cells/mL) were transfected with 75 μg plasmid DNA as described previously (You et al. 2013).
Reduced capillary electrophoresis-SDS assay (CE-SDS)
The purity of antibodies was determined by PA800 plus pharmaceutical analysis systems with commercial CE-SDS kit (Cat# 390953). Briefly, A 50 μM I.D. bare fused-silica capillary with 30.2 cm total length (20.0 cm effective length) was used in this assay. The signals were collected by a PDA detection module. For the preparation of samples, SDS buffer was used to dilute the samples to nearly 1 mg/mL, then added internal standard and β-mercaptoethanol to the sample solution and water bath at 100 °C for 3 min. The default method was used to run the samples in PA800 plus.
MS determination of the cleavage of the signal peptide in antibodies
To determine cleavage sites, antibodies with different signal peptides were purified by protein A. Antibodies suspended in a loading buffer (50 mM Tris pH 6.8, 2% SDS, 5% 2-mercaptoethanol, 0.01% bromophenol blue, 8% glycerol) were electrophoresed in a 12% SDS-PAGE gel. The light chain and heavy chain were collected separately from the gel.
The bands corresponding to target proteins were excised and subjected to in-gel digestion. The gel pieces were first washed with 50 mM ammonium bicarbonate (pH 8.0)/50% ACN and dried. The dried gel pieces were incubated with reduction buffer containing 10 mM DTT in 50 mM ammonium bicarbonate (pH 8.0) at 56 °C for 30 min, followed by alkylation with the buffer containing 50 mM iodoacetamide at room temperature in the dark for 30 min. Next, the gel pieces were washed with 100% ACN and dried. Trypsin in 50 mM ammonium bicarbonate (pH 8.0) was added into gel pieces at the ratio of protein/trypsin (100:1). Gel pieces were then incubated at 4 °C for 1 h followed by 37 °C for 12–18 h. The tryptic peptides were extracted from the gel pieces using the buffer containing 66.7% ACN/1.6% formic acid in H2O and desalted with C18 STAGEtips. The tryptic peptides were analyzed on mass spectrometry AB Sciex TripleTOF 5600. The wiff files were searched for target protein sequences associated with common contaminant proteins using the ProteinPilot (V4.5 beta) software with the search mode “Rapid.”
Codon optimization
The variable regions of antibodies and the constant regions of human IgG1 were optimized with the Codon OptimWiz (Genewiz, China) expert software. The candidate sequences are assessed taking into account codon usage in Cricetulus griseus, the secondary structure of mRNA, GC content, species-specific sequence motifs, removal of restriction enzyme cutting sites and cleavage sites, and repeat sequences. The DNA fragments with optimized codon sequences were obtained by synthesis.
Vector construction with UTR
5′UTR(GCCGCCACC) and 3′UTR(AACGGGCTGATGCTGCACCAACTGTATCCA, GeneBank:M35669) were introduced to the 5′ and 3′ ends of antibody coding sequences by PCR. These fragments were cloned to pTT5 by EcoR I and Xba I.
Cells counting and antibody yield evaluation
The culture were mixed with trypan blue and assayed by an automatic analyzer (Countstar, China) for cell density and viability determination. The antibody yield of the transfectants was determined by Cedex Bio (Roche, Germany) with human IgG1 HB module.
The Cedex Bio uses absorption photometry for determining the amount of absorbance in a fluid. The absorbance which is linear correlation to the antibody concentration is used to calculate the antibody titer in the solution. Before assay, calibrations and QC were performed, resulting in a standard curve for antibody yield calculating. In brief, the culture supernatant was put into the sample area manually and sampled and mixed with the reaction reagent by the equipment automatically. About 8 min later, the absorbance value was read and the concentration was calculated.
Size-exclusion chromatography-high-performance liquid chromatography (SEC-HPLC)
The product from the optimized TGE was purified by protein A and analyzed using a TSK-Gel column G3000 (Tosoh Biosep) on a Waters HPLC (Waters). The mobile phase is a 100-mM phosphate buffer at pH 7.0, and the regenerative solution is 150 mM NaCl. The purified protein at 100 μg/mL was loaded at a flow rate of 0.5 mL/min. The detection wavelength is 280 nm.
Binding activity assay
The purified antibody made from optimized TGE and standard samples were diluted in a gradient using a workstation (Beckman FX, USA) beginning at 1000 ng/mL. The diluted samples were added to the 96-w plates coated with antigens and investigated the binding activity by chemical luminescence assay (CLA). Experiments in all wells were repeated at three times. The CLA values were submitted to Prism 7 for EC50 calculation.
Stable cell pool development and yield evaluation
The genes of the antibody were inserted into the dual CMV promoter expression vector with gs marker pGS2 (Fig. S-1), and the plasmid was linearized and transfected into suspended CHO-k1 cell. The cells were plated into 96-w plates at 5000 c/w with 25uM MSX at 48 h post transfection. After 15 days of cultivation, the 30 mini pools with the highest yield of each transfection were selected to be expanded by HTRF (Cisbio).
For the top 30 mini pools, batch or fed-batch culture was carried out with initial seeding density at 5E5c/mL. For the batch culture, the cells were inoculated in CD CHO (Gibco) + HT medium and cultured for 7 days at 37 °C. For the fed-batch culture, cells were seeded in CD Forti (Gibco) and fed with 10% Feed C medium (Gibco) at day 3, day 6, day 8, day 10, and day 12. The concentration of glucose was maintained above 5 g/L, and the cultivation temperature shifted to 32 °C at day 6. The whole fed-batch process lasts 14 days.
Results
Selection of appropriate signal peptide for antibody expression
Signal peptides play an important role in the secretion of recombinant proteins expressed in mammalian cells (Trosse et al. 2007; Young and Rance 2008). Many studies have shown that optimization of signal peptides could improve the production of recombinant proteins (Haryadi et al. 2015; Kober et al. 2013). Based on these observations, four promising signal peptides (listed in Table 2) previously reported to increase the antibody production (Kober et al. 2013; Luo et al. 2007), were tested in this study.
Suspension culture CHO-S cells were co-transfected with pTT5 expression plasmid containing genes of the heavy chain and the light chain of B45 hAb fused with the signal peptides in Table 1. Samples were taken from cultures every day for productivity testing and cell counting. Maximum productivity for each condition is shown in Fig. 1a. We found that co-expression of 8Hsp-H and 8Ksp-K led to the lowest expression, 30 mg/L. A comparable yield, 40 mg/L was obtained by co-expression of B-H mix with B-K(B-H + B-K) or E-H with E-K(E-H + E-K). However, there were no significant differences in the cell viability and density (Fig. 1b, c).
The cleavage of signal peptide accompanied by the protein secretion is even more important for industrial production than productivity. To predict the cleavage of the signal peptide, the DNA sequences of the kappa chains or heavy chains with signal peptide at N-terminal were submitted to the Signal P 4.1 Server. As seen in Fig. S-2, all signal peptides were predicted to result in a correct cleavage, and all signal peptides could be cut off completely.
In order to verify the cleavage site, the products were purified using protein A and analyzed by reduced CE-SDS separation. For all products (shown in the left column of the Fig. 2), the area of each K-chain was about 34%, and the H-chain was about 65%. As a result, the K/H for each product was 1:1 (mol/mol). The retention time of the signal peak was almost coincident. Subsequently, the light chain and heavy chain were assayed by MS. As shown in the right column of Fig. 2, the K-chain with E signal peptide (Fig. 2a), H-chain with B signal peptide (Fig. 2b), and H-chain with 8Hsp (Fig. 2c) resulted in correct N terminals. For other fusions, there were unwanted amino acid residues from the signal peptide on the N-terminal. For safety, additional amino acid residues are undesirable. Therefore, K-chain with E signal peptide (E-K), H-chain with B signal peptide (B-H), and H-chain with 8Hsp (8Hsp-H) were selected as candidates.
To explore antibody productivity with optimal signal peptide, the E-K were mixed with B-H or 8Hsp-H and were co-expressed in CHOs separately. The 8Hsp-H and E-K combination led to a higher titer, 45 mg/L, than the combination of B-H and E-K (P = 0.005, Fig. 3a). However, there was no significant difference in the viable cell density (Fig. 3b) and viability (Fig. 3c).
To investigate the splicing site of the signal peptide, the products were analyzed by MS. The peptide spectrum from MS confirmed that all chains possessed the correct N-terminal peptide without any additional or missed amino acids (data not shown). Taking into account the productivity and signal peptide cleavage, the combination of K-chain fused with E and H-chain fused with 8Hsp were selected for antibody expression.
Enhance the expression with codon optimization and UTR
The constant region of human IgG 1 was from the human cDNA library, and the codons are biased to human. The variable regions of B45 hAb were from phage library (Luo et al. 2016), and there was no obvious codon bias in the library. A web server, Codon OptimWiz (Genewiz, China), was used to optimize the codon of the variable region and constant region to bias to CHO cell. All sequences are listed in Fig. S-3. The information of sequence-optimized genes is summarized in Table S-1. Compared to the sequence before codon optimization, the codon adaptation index (CAI)s were reached more than 0.95, and the GC content was adjusted to about 60%.
To investigate the productivity enhancement after codon optimization, different vector combinations containing light and heavy chains with default signal peptide (8Ksp and 8Hsp) and optimal codon were co-transfected into CHOs. As expected, the yield was increased by 100% with codon optimization, and the 45KOC made a greater contribution to the yield improvement because co-transfected 45KOC with H led to an equivalent yield to co-transfected 45KOC and 45HOC (Fig. 4a). There were no significant differences in cell density and viability for all tests (data no shown).
Kozak sequence, a typical 5′ UTR, is reported to play a role in efficient initiation of the translation process. The 3′ UTR of murine Ig kappa chain v-j2-c (GeneBank: M35669, 30 bp) was used to stabilize mRNA in numerous studies (Li and Chen 2011). In order to improve the productivity further, a 5′ UTR was added to the 5′ end of the sequence with optimal signal peptide and codon, and a 3′ UTR was added to the 3′ end. A 50% increase was observed from transient expression of the vector with UTR (Fig. 4b), and a correct N-terminal sequence was detected from the product examined by MS (data not shown). So far, an optimal vector with an appropriate signal peptide, codon, and UTR has been constructed and could express antibody with the correct N-terminal sequence and high yield.
The SEC-HPLC and binding activity assay for products from TGE
The TGE culture with vector containing optimized signal peptide, codon, and UTR was purified using protein A and subjected to SEC-HPLC assay. The result is shown in Fig. 5a. There was only one sharp peak with retention time at 15.8 min. After analysis by Empower 3, it was found that the percentage of HMW was 1.2%, the LMW was 0%, and the main peak was 98.8%. This result indicates that the antibody expressed with the optimized TGE method was of a good homogeneity.
To explore the biological activity of the product with optimized TGE, the purified product and standard reference material were tested by CLA for binding activity with HBsAg. The reaction curves of the product with optimized TGE and standard material are coincident (Fig. 5b). Subsequently, CLA data were entered into Prism for calculation of EC50. EC50 of standard material was 0.002108, and EC50 of the product with optimized TGE was 0.001981. These results demonstrate that the optimized TGE method does not affect the biological activity of the product.
Optimization of expression for other antibodies
In order to investigate how application of the TGE optimized strategy could be applied generally, the TGE method was applied for expression of two other antibodies: Herceptin, a humanized antibody against Her2, and 37 hAb, a humanized antibody against H5N1.
The VK and VH sequences of Herceptin were taken from NCBI (Hoerr et al. 2016). The cDNAs of 37 hAb were taken from a phage display library (Luo et al. 2008). The signal peptides in Table 2 were fused to the N-terminal of the variable region for TGE. We found that the highest TGE was achieved by B signal peptide for Herceptin and antibody 37 hAb. The highest yield of Herceptin was 83 mg/L (P < 0.05) and the highest yield of 37 hAb was 64 mg/L (P < 0.05) (Fig. 6a, b). The products were purified and assayed by MS. Fortunately, we found all signal peptides had the correct N terminals (Fig. 6c, d). With the highest yield, B signal peptide was chosen for further study.
Next, the codons of the variable regions of 37 hAb and Herceptin were optimized by Codon OptimWiz. Codon optimization is shown in Fig. S-4. The parameters of optimized codons are summarized in Table S-2. After codon optimization, the codon adaptation index (CAI) increased to more than 0.96, and the GC content was adjusted to about 61%.
Finally, a UTR sequence was added to the 5′ and 3′ of the antibody ORF, and the cDNAs of 37 hAb and Herceptin with UTR were separately inserted into Ptt5 at multiple cloning sites to generate expression vectors. The plasmids of light chain and heavy chain were co-transfected into CHO cells. The yield of TGE for Herceptin post optimization was 2.2-fold higher than that of control, and the yield for 37 hAb was 2.3-fold higher (Fig. 7). The yield of Herceptin was increased from 51 to 109.9 mg/L, while the productivity of 37 hAb was raised from 30 to 69 mg/L after optimization (Fig. 7). There was no significant change in the binding activity of the products (data not shown). These results indicate that TGE with optimized signal peptide, codon, and UTR can improve the expression of antibody, and this strategy could be replicated in expression of other antibodies.
Optimization the expression of stable cell pool
Transient expression may be affected by a variety of factors, and the yield may be varied from lot to lot. To verify if this optimization strategy is applicable in stable gene expression, the genes of the antibody were cloned into the GS expression vector pGS2 (Fig. S-1) to generate stable expression vector. The CHO-K1 were transfected with the stable expression vectors and screened for stable mini pools with MSX. The top 30 mini pool in titer of each transfection were subjected to batch culture. It is exhibited in Fig. 8a that a higher frequency and higher yields were gained post optimization with codon and UTR. The maximum yield of control group (8 Hsp-H + 8 Ksp-K) is 73 mg/L, and the maximum yield of the group with signal peptide optimization (8 Hsp-H + E-K) is 104 mg/L. The highest yield of the mini pools with codon optimization (8 Hsp-HOC + E-KOC) is achieved to 203 mg/L. Furtherly, a yield of 277 mg/L was reached after adding UTR. Figure 8b shows the expression level of top 10 mini pools with fed-batch culture, the mean titer of the control group (8 Hsp-H + E-K) is 557 mg/L, and the average yield of the group with signal peptide, codon, and UTR optimization (UTR + 8Hsp-HOC + E-KOC) is up to 1770 mg/L. The mean values in Fig. 8b is consistent with the values in Fig. 8a. It proves that the optimization of signal peptide, codon, and UTR can also effectively improve the level of stable expression.
Discussion
The clinical and commercial success of therapeutic antibodies has led to the need for large-scale production in mammalian cell culture and rapid expansion of global manufacturing capacity (Birch and Racher 2006). In addition to high productivity, high quality is indispensable for therapeutic drugs. In the development of a production process, every parameter is optimized to achieve high productivity and accurately maintain the antibody molecule. In the early stage of production process development, TGE always is used to predict the yield and quality in SGE. In terms of quality, an accurate N-terminal sequence is indispensable. Vector design is essential for success in both TGE and SGE. In this study, we optimized a TGE strategy with an appropriate signal peptide, codon, and UTR to increase expression by 150% and obtain an antibody with an accurate N-terminal sequence. And we verified that this optimization method is also effective for stable expression.
An expression cassette is made up of, at least, strong promoters, an open reading frame (ORF) and a polyA tail. Sometimes an additional element, such as an enhancer or intron, can improve the yield. The UTR at 3′ and 5′ terminals of the ORF can enhance translation and stabilize mRNA (Araujo et al. 2012; Kuersten and Goodwin 2003; Lopez-Lastra et al. 2005; Mazumder et al. 2003). The most common 5′ UTR is the Kozak sequence. Many studies have shown that the expression levels were elevated through translation enhanced by the Kozak sequence (Lopez-Lastra et al. 2005). The 3′ UTR has been used to stabilize mRNA (Erson-Bensan 2016). In this work, we enhance the yield by 50% through UTR addition. It is possible to extend the half-life of mRNA, resulting in a higher mRNA level, as assessed by northern blot (Fig. S-5).
Normally, the ORF region of secreted proteins includes a signal peptide for secretion. The signal peptide is cut in the secretion stage. On one hand, the signal peptide determines the efficiency of protein secretion and the yield. We have enhanced the antibody expression using signal peptides, which is in agreement with previous reports (Knappskog et al. 2007). In Lars Kober’s study (Kober et al. 2013), vector with B signal peptide or E signal peptide for both K-chain and H-chain led to a higher yield in CHO-K1. In this work, we found the yield from the B signal peptide fused both chain led the highest yield.
On the other hand, the splice site of signal peptide is important for the accuracy of the molecules, because unnecessary amino acid residues from signal peptide are undesirable, especially for therapeutic antibodies. Splice site is a necessary consideration for signal peptide selection. Different signal peptides may result in different splice sites (Kotia and Raghani 2010). Currently, there are many software programs that can predict the signal peptide cleavage site. But the use of software predictions has not been approved by the FDA; the FDA has only approved the use of the sequences from N-terminal sequenced by MS or other sequencing methods. Predictions may not match the sequencing results, because cleavage sites can alternate (Kotia and Raghani 2010). In this work, all signal peptides tested could lead to splice sites corresponding to software predictions. However, as evaluated by MS sequencing, only the co-expression of E signal fused B45-K-chain and 8Hsp fused B45-H-chain led to the correct splice sites. In order to meet FDA requirements, co-expression of E-K and 8Hsp-H was selected to produce B45 hAb, although this combination is not the best in terms of yield. For the other two antibodies, all signal peptides are accurately removed in the products.
Previous studies show that codon bias in expression of exogenous genes is a common phenomenon. In non-mammalian expression systems (Burgess-Brown et al. 2008; Han et al. 2010) or mammalian expression systems (Fath et al. 2011), codon optimization is an effective method to improve yield. But the range of improvement is not guaranteed; some special features of proteins could result in lower expression (Fath et al. 2011). In this study, the productivity was enhanced by 100% through codon optimization. Increased expression resulting from codon optimization has been attributed to translational enhancement (Kudla et al. 2006; Robinson et al. 2008). Many publications suggest that codon optimization predominantly raises mRNA levels (Anson and Dunning 2005; Kudla et al. 2006, 2009). Other publications show that the GC content affects the stability of the mRNA directly and affects the mRNA level indirectly (Graf et al. 2004). In this study, increased mRNA level was detected from the culture transfected with the vector after codon optimization with increased GC content (Fig. S-4). We suppose that, together with a higher mRNA level from increased GC content, enhancement of transcription resulted in increased protein expression.
Product quality results, SEC-HPLC, and the binding activity for antibody product generated from optimized TGE were also comparable to the control product. We applied this strategy to optimize the TGE of two other antibodies and obtained similar results, indicating replicability of this method.
In this study, we have demonstrated that optimization with an appropriate codon, signal peptide, and UTR can enhance expression yield and produce antibodies with accurate N-terminal sequence in TGE experiments. While codon optimization, signal peptide optimization, and using UTR has been used extensively in enhancing expression for stable production and TGE individually, this is the first example of vector engineering combining appropriate codon, signal peptide, and UTR to increase production of a therapeutic protein with accurate molecular by TGE. Such a production process development begins at stable cell line construction, which contains vector design, transfection, antibiotic pressure, cloning, and scale-up culture. Vector engineering is one of many possible strategies that affect the physiological state of production with significant benefit to yields for TGE, SGE, and industrial production. As the demand for faster development and expression of therapeutic protein grows in the biotechnology industry, the need for TGE is certain to increase in importance (Majors et al. 2008a, b). Adapting vector engineering to the available TGE technologies is likely to help accelerate the development of production process in the coming years.
References
Anson DS, Dunning KR (2005) Codon-optimized reading frames facilitate high-level expression of the HIV-1 minor proteins. Mol Biotechnol 31(1):85–88. https://doi.org/10.1385/MB:31:1:085
Araujo PR, Yoon K, Ko D, Smith AD, Qiao M, Suresh U, Burns SC, Penalva LO (2012) Before it gets started: regulating translation at the 5′ UTR. Comp Funct Genomics 2012:475731. https://doi.org/10.1155/2012/475731
Birch JR, Racher AJ (2006) Antibody production. Adv Drug Deliv Rev 58(5–6):671–685. https://doi.org/10.1016/j.addr.2005.12.006
Brandis G, Hughes D (2016) The selective advantage of synonymous codon usage bias in Salmonella. PLoS Genet 12(3):e1005926. https://doi.org/10.1371/journal.pgen.1005926
Burgess-Brown NA, Sharma S, Sobott F, Loenarz C, Oppermann U, Gileadi O (2008) Codon optimization can improve expression of human genes in Escherichia coli: a multi-gene study. Protein Expr Purif 59(1):94–102. https://doi.org/10.1016/j.pep.2008.01.008
Chung BK, Yusufi FN, Mariati, Yang Y, Lee DY (2013) Enhanced expression of codon optimized interferon gamma in CHO cells. J Biotechnol 167(3):326–333. https://doi.org/10.1016/j.jbiotec.2013.07.011
Durocher Y, Perret S, Kamen A (2002) High-level and high-throughput recombinant protein production by transient transfection of suspension-growing human 293-EBNA1 cells. Nucleic Acids Res 30(2):E9
Elgundi Z, Reslan M, Cruz E, Sifniotis V, Kayser V (2016) The state-of-play and future of antibody therapeutics. Adv Drug Deliv Rev 122:2–19. https://doi.org/10.1016/j.addr.2016.11.004
Erson-Bensan AE (2016) Alternative polyadenylation and RNA-binding proteins. J Mol Endocrinol 57(2):F29–F34. https://doi.org/10.1530/JME-16-0070
Fath S, Bauer AP, Liss M, Spriestersbach A, Maertens B, Hahn P, Ludwig C, Schafer F, Graf M, Wagner R (2011) Multiparameter RNA and codon optimization: a standardized tool to assess and enhance autologous mammalian gene expression. PLoS One 6(3):e17596. https://doi.org/10.1371/journal.pone.0017596
Frenzel A, Hust M, Schirrmann T (2013) Expression of recombinant antibodies. Front Immunol 4:217. https://doi.org/10.3389/fimmu.2013.00217
Gaughan CL (2016) The present state of the art in expression, production and characterization of monoclonal antibodies. Mol Duvers 20(1):255–270. https://doi.org/10.1007/s11030-015-9625-z
Gibson SJ, Bond NJ, Milne S, Lewis A, Sheriff A, Pettman G, Pradhan R, Higazi DR, Hatton D (2017) N-terminal or signal peptide sequence engineering prevents truncation of human monoclonal antibody light chains. Biotechnol Bioeng 114(9):1970–1977. https://doi.org/10.1002/bit.26301
Graf M, Deml L, Wagner R (2004) Codon-optimized genes that enable increased heterologous expression in mammalian cells and elicit efficient immune responses in mice after vaccination of naked DNA. Methods Mol Med 94:197–210
Han JH, Choi YS, Kim WJ, Jeon YH, Lee SK, Lee BJ, Ryu KS (2010) Codon optimization enhances protein expression of human peptide deformylase in E. coli. Protein Expr Purif 70(2):224–230. https://doi.org/10.1016/j.pep.2009.10.005
Haryadi R, Ho S, Kok YJ, Pu HX, Zheng L, Pereira NA, Li B, Bi X, Goh LT, Yang Y, Song Z (2015) Optimization of heavy chain and light chain signal peptides for high level expression of therapeutic antibodies in CHO cells. PLoS One 10(2):e0116878. https://doi.org/10.1371/journal.pone.0116878
Ho SC, Tong Y, Yang Y (2013) Generation of monoclonal antibody producing mammalian cell lines. Pharm Bioproc 1(1):71–87. https://doi.org/10.4155/pbp.13.8
Hoerr I, Probst J, Pascolo S (2016) RNA coded antibody, patent, US20160185640A1
Jostock T, Knopf HP (2012) Mammalian stable expression of biotherapeutics. Methods Mol Biol 899:227–238. https://doi.org/10.1007/978-1-61779-921-1_15
Kanaya S, Yamada Y, Kinouchi M, Kudo Y, Ikemura T (2001) Codon usage and tRNA genes in eukaryotes: correlation of codon usage diversity with translation efficiency and with CG-dinucleotide usage as assessed by multivariate analysis. J Mol Evol 53(4–5):290–298. https://doi.org/10.1007/s002390010219
Kim JY, Kim YG, Lee GM (2012) CHO cells in biotechnology for production of recombinant proteins: current state and further potential. Appl Microbiol Biotechnol 93(3):917–930. https://doi.org/10.1007/s00253-011-3758-5
Knappskog S, Ravneberg H, Gjerdrum C, Trosse C, Stern B, Pryme IF (2007) The level of synthesis and secretion of Gaussia princeps luciferase in transfected CHO cells is heavily dependent on the choice of signal peptide. J Biotechnol 128(4):705–715. https://doi.org/10.1016/j.jbiotec.2006.11.026
Kober L, Zehe C, Bode J (2013) Optimized signal peptides for the development of high expressing CHO cell lines. Biotechnol Bioeng 110(4):1164–1173. https://doi.org/10.1002/bit.24776
Kotia RB, Raghani AR (2010) Analysis of monoclonal antibody product heterogeneity resulting from alternate cleavage sites of signal peptide. Anal Biochem 399(2):190–195. https://doi.org/10.1016/j.ab.2010.01.008
Kudla G, Lipinski L, Caffin F, Helwak A, Zylicz M (2006) High guanine and cytosine content increases mRNA levels in mammalian cells. PLoS Biol 4(6):e180. https://doi.org/10.1371/journal.pbio.0040180
Kudla G, Murray AW, Tollervey D, Plotkin JB (2009) Coding-sequence determinants of gene expression in Escherichia coli. Science 324(5924):255–258. https://doi.org/10.1126/science.1170160
Kuersten S, Goodwin EB (2003) The power of the 3′ UTR: translational control and development. Nat Rev Genet 4(8):626–637. https://doi.org/10.1038/nrg1125
Kunert R, Reinhart D (2016) Advances in recombinant antibody manufacturing. Appl Microbiol Biotechnol 100(8):3451–3461. https://doi.org/10.1007/s00253-016-7388-9
Li Q, Chen X (2011) Mamalian cell expression vectors and utilization, patent, US20110097798A1
Li F, Vijayasankaran N, Shen AY, Kiss R, Amanullah A (2010) Cell culture processes for monoclonal antibody production. MAbs 2(5):466–479
Lopez-Lastra M, Rivas A, Barria MI (2005) Protein synthesis in eukaryotes: the growing biological relevance of cap-independent translation initiation. Biol Res 38(2–3):121–146
Luo W, Chen Y, Li L, Xu C, Miao J, Shih JW, Zhang J, Xia N (2007) Construction and characterization of the chimeric antibody 8C11 to the hepatitis E virus. FEMS Immunol Med Microbiol 51(1):18–25. https://doi.org/10.1111/j.1574-695X.2007.00253.x
Luo W, Chen Y, Zhen Z, Li G, Chen H, Zhang J, Xia N (2008) Humanized antibodies against H5 subtype avian influenza virus hemagglutinin protein and uses thereof, patent, CN101851289A
Luo W, Zhou B, Zhang T, Yuan Q, Xia N (2016) Antibodies against hepatitis B surface antigen and uses thereof, patent, CN201610879693.5
Majors BS, Arden N, Oyler GA, Chiang GG, Pederson NE, Betenbaugh MJ (2008a) E2F-1 overexpression increases viable cell density in batch cultures of Chinese hamster ovary cells. J Biotechnol 138(3–4):103–106. https://doi.org/10.1016/j.jbiotec.2008.08.003
Majors BS, Betenbaugh MJ, Pederson NE, Chiang GG (2008b) Enhancement of transient gene expression and culture viability using Chinese hamster ovary cells overexpressing Bcl-x(L). Biotechnol Bioeng 101(3):567–578. https://doi.org/10.1002/bit.21917
Mazumder B, Seshadri V, Fox PL (2003) Translational control by the 3′-UTR: the ends specify the means. Trends Biochem Sci 28(2):91–98. https://doi.org/10.1016/S0968-0004(03)00002-1
Nakamura Y, Gojobori T, Ikemura T (2000) Codon usage tabulated from international DNA sequence databases: status for the year 2000. Nucleic Acids Res 28(1):292
Nielsen H, Engelbrecht J, Brunak S, von Heijne G (1997a) Identification of prokaryotic and eukaryotic signal peptides and prediction of their cleavage sites. Protein Eng 10(1):1–6
Nielsen H, Engelbrecht J, Brunak S, von Heijne G (1997b) A neural network method for identification of prokaryotic and eukaryotic signal peptides and prediction of their cleavage sites. Int J Neural Syst 8(5–6):581–599
Petersen TN, Brunak S, von Heijne G, Nielsen H (2011) SignalP 4.0: discriminating signal peptides from transmembrane regions. Nat Methods 8(10):785–786. https://doi.org/10.1038/nmeth.1701
Robinson F, Jackson RJ, Smith CW (2008) Expression of human nPTB is limited by extreme suboptimal codon content. PLoS One 3(3):e1801. https://doi.org/10.1371/journal.pone.0001801
Strohl WR (2017) Current progress in innovative engineered antibodies. Protein Cell 9:86–120. https://doi.org/10.1007/s13238-017-0457-8
Trosse C, Ravneberg H, Stern B, Pryme IF (2007) Vectors encoding seven oikosin signal peptides transfected into CHO cells differ greatly in mediating Gaussia luciferase and human endostatin production although mRNA levels are largely unaffected. Gene Regul Syst Biol 1:303–312
You M, Liu Y, Chen Y, Guo J, Wu J, Fu Y, Shen R, Qi R, Luo W, Xia N (2013) Maximizing antibody production in suspension-cultured mammalian cells by the customized transient gene expression method. Biosci Biotechnol Biochem 77(6):1207–1213. https://doi.org/10.1271/bbb.120968
Young R, Rance J (2008) Mammalian expression vector with a highly effient secretory signal sequence, patent, WO 2008/148519 A2
Zhang L, Leng Q, Mixson AJ (2005) Alteration in the IL-2 signal peptide affects secretion of proteins in vitro and in vivo. J Gene Med 7(3):354–365. https://doi.org/10.1002/jgm.677
Zhang G, Liu J, Fan W, Chen Q, Shi B (2017) An efficient transient expression system for enhancing the generation of monoclonal antibodies in 293 suspension cells. Curr Pharm Biotechnol 18(4):351–357. https://doi.org/10.2174/1389201018666170320110545
Acknowledgements
We thank Dr. Georgina Salazar at the University of Texas Health Science Center at Houston for her careful and critical reading of the manuscript.
Funding
This study was supported by the NSFC(31670927) and Natural Science Foundation of Fujian Province (2017J01066).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
This article does not contain any studies with human participants or animals performed by any of the authors.
Conflict of interest
The authors declare that they have no conflict of interest.
Electronic supplementary material
ESM 1
(PDF 1218 kb)
Rights and permissions
About this article
Cite this article
You, M., Yang, Y., Zhong, C. et al. Efficient mAb production in CHO cells with optimized signal peptide, codon, and UTR. Appl Microbiol Biotechnol 102, 5953–5964 (2018). https://doi.org/10.1007/s00253-018-8986-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00253-018-8986-5