Abstract
Due to the wide usage of digital devices and easy access to the edge items in manufacturing industry, massive industrial data is generated and collected. A data-driven smart production line (SPL), which is a basic cell in a smart factory, is derived primarily. This paper studies the data-driven SPL and its common factors. Firstly, common factors such as integration, data-driven, service collaboration, and proactive service of SPL are investigated. Then, a data-driven method including data self-perception, data understanding, decision-making, and precise control for implementing SPL is proposed. As a reference, the research of the common factors and the data-driven method could offer a systematic standard for both academia and industry. Moreover, in order to validate this method, this paper presents an industrial case by taking an energy consumption forecast and fault diagnosis based on energy consumption data in a prototype of LED epoxy molding compound (EMC) production lines for example.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Tao F, Cheng Y, Zhang L, Nee AYC (2017) Advanced manufacturing systems: socialization characteristics and trends. J Intell Manuf 28(5):1079–1094
Lucke D, Constantinescu C, Westkämper E (2008) Smart factory - a step towards the next generation of manufacturing. In: Manufacturing Systems & Technologies for the New Frontier, pp 115–118
Zuehlke D (2010) SmartFactory—towards a factory-of-things. Annu Rev Control 34(1):129–138
Wang XV, Xu XW (2015) A collaborative product data exchange environment based on STEP. Int J Comput Integr Manuf 28(1):75–86
Zhong RY, Dai QY, Qu T, Hu GJ, Huang GQ (2013) RFID-enabled real-time manufacturing execution system for mass-customization production. Robot Comput Integr Manuf 29(2):283–292
Tao F, Cheng Y, Xu LD, Zhang L, Li BH (2014) CCIoT-CMfg: cloud computing and Internet of Things-based cloud manufacturing service system. IEEE T Ind Inform 10(2):1435–1442
Mejjaouli S, Babiceanu RF (2015) RFID-wireless sensor networks integration: decision models and optimization of logistics systems operations. J Manuf Syst 35:234–245
Lu S, Xu C, Zhong RY, Wang L (2017) A RFID-enabled positioning system in automated guided vehicle for smart factories. J Manuf Syst 44:179–190
Babiceanu RF, Seker R (2016) Big data and virtualization for manufacturing cyber-physical systems: a survey of the current status and future outlook. Comput Ind 81:128–137
Kusiak A (2017) Smart manufacturing must embrace big data. Nature 544(7648):23–25
Kuo YH, Kusiak A (2018) From data to big data in production research: the past and future trends. Int J Prod Res 11:1–26
Wang S, Wan J, Zhang D, Li D, Zhang C (2016) Towards smart factory for industry 4.0: a self-organized multi-agent system with big data based feedback and coordination. Comput Netw 101:158–168
Zhong RY, Xu C, Chen C, Huang GQ (2017) Big data analytics for physical internet-based intelligent manufacturing shopfloors. Int J Prod Res 55(9):2610–2621
Tao F, Qi Q, Liu A, Kusiak A (2018) Data-driven smart manufacturing. J Manuf Syst 48:157–169. https://doi.org/10.1016/j.jmsy.2018.01.006
Kezunovic M (2011) Translational knowledge: from collecting data to making decisions in a smart grid. Proc IEEE 99(6):977–997
Rusu LI, Rahayu W, Torabi T, Puersch F, Coronado W, Harris AT, Reed K (2012) Moving towards a collaborative decision support system for aeronautical data. J Intell Manuf 23(6):2085–2100
Tao F, Zhang M (2017) Digital twin shop-floor: a new shop-floor paradigm towards smart manufacturing. IEEE Access 5:20418–20427
Chien CF, Hsu CY, Hsiao CW (2012) Manufacturing intelligence to forecast and reduce semiconductor cycle time. J Intell Manuf 23(6):2281–2294
Tao F, Cheng J, Qi Q, Zhang M, Zhang H, Sui F (2017) Digital twin-driven product design, manufacturing and service with big data. Int J Adv Manuf Technol 94(9–12):3563–3576
Tao F, Qi Q (2017) New IT driven service-oriented smart manufacturing: framework and characteristics. IEEE Trans Syst Man Cybern -Syst 49:81–91. https://doi.org/10.1109/TSMC.2017.2723764
Djurdjanovic D, Mears L, Niaki FA, Haq AU, Li L (2017) State of the art review on process, system, and operations control in modern manufacturing. J Manuf Sci Eng 140(6):061010
Jeong W, Ko H, Lim H et al (2013) A protocol for processing interfered data in facility sensor networks. Int J Adv Manuf Technol 67(9–12):2377–2385
Cao W, Jiang P, Lu P, Liu B, Jiang K (2017) Real-time data-driven monitoring in job-shop floor based on radio frequency identification. Int J Adv Manuf Technol 92(5–8):2099–2120
Tao F, Cheng J, Qi Q (2018) IIHub: an industrial Internet-of-Things hub towards smart manufacturing based on cyber-physical system. IEEE Trans Ind Inf 14(5):2271–2280
Sahebjamnia N, Tavakkoli-Moghaddam R, Ghorbani N (2016) Designing a fuzzy Q-learning multi-agent quality control system for a continuous chemical production line - a case study. Pergamon Press, Inc
Jarrahi F, Abdul-Kader W (2015) Performance evaluation of a multi-product production line: an approximation method. Appl Math Model 39(13):3619–3636
Sabar M, Montreuil B, Frayret JM (2012) An agent-based algorithm for personnel shift-scheduling and rescheduling in flexible assembly lines. J Intell Manuf 23(6):2623–2634
Alsina EF, Chica M, Trawiński K, Regattieri A (2018) On the use of machine learning methods to predict component reliability from data-driven industrial case studies. Int J Adv Manuf Technol 94(5–8):2419–2433
Sadeghian R, Sadeghian MR (2016) A decision support system based on artificial neural network and fuzzy analytic network process for selection of machine tools in a flexible manufacturing system. Int J Adv Manuf Technol 82(9–12):1795–1803
Diez-Olivan A, Pagan JA, Khoa NLD, Sanz R, Sierra B (2017) Kernel-based support vector machines for automated health status assessment in monitoring sensor data. Int J Adv Manuf Technol 95(1–4):327–340
Liu J, Tang Z, Jin Z, Chen Q, Xu P, Liu W (2016) Visual perception-based statistical modeling of complex grain image for product quality monitoring and supervision on assembly production line. PLoS One 11(3):e0146484
Yun JP, Chang HP (2017) Vision-based surface defect inspection for thick steel plates. Opt Eng 56(5):053108
Şaban Ö, Akdemir B (2018) Real-time product quality control system using optimized gabor filter bank. Int J Adv Manuf Technol 96(1–4):11–19
Grabowski D, Cristalli C (2015) Production line quality control using infrared imaging. Infrared Phys 71:416–423
Sahnoun M, Bettayeb B, Bassetto SJ, Tollenaere M (2016) Simulation-based optimization of sampling plans to reduce inspections while mastering the risk exposure in semiconductor manufacturing. J Intell Manuf 27(6):1335–1349
Hanjie X, Dalin R, Shibo W (2017) EDM machining quality control and parameters optimization. Int J Adv Manuf Technol 89(5–8):1307–1315
Xu AM, Gao JM, Chen K (2016) Excavation of critical resource node for quality control of multi-variety mixed production shopfloor based on complex network property. Proc Inst Mech Eng J Eng Manuf 230(1):169–177
Diao G, Zhao L, Yao Y (2015) A dynamic quality control approach by improving dominant factors based on improved principal component analysis. Int J Prod Res 53(14):4287–4303
Ebrahimipour V, Najjarbashi A, Sheikhalishahi M (2015) Multi-objective modeling for preventive maintenance scheduling in a multiple production line. J Intell Manuf 26(1):111–122
Wang J, Zhang L, Duan L, Gao RX (2017) A new paradigm of cloud-based predictive maintenance for intelligent manufacturing. J Intell Manuf 28(5):1125–1137
Rezaei-Malek M, Tavakkoli-Moghaddam R, Siadat A, Dantan JY (2018) A novel model for the integrated planning of part quality inspection and preventive maintenance in a linear-deteriorating serial multi-stage manufacturing system. Int J Adv Manuf Technol 96(9–12):3633–3650
Shrivastava D, Kulkarni MS, Vrat P (2016) Integrated design of preventive maintenance and quality control policy parameters with CUSUM chart. Int J Adv Manuf Technol 82(9–12):2101–2112
Li Y, Ge SS (2016) Force tracking control for motion synchronization in human-robot collaboration. Robotica 34(6):1260–1281
Lasota PA, Shah JA (2015) Analyzing the effects of human-aware motion planning on close-proximity human-robot collaboration. Hum Factors 57(1):21–33
Degeafernández J, Mronga D, Günther M, Knobloch T, Wirkus M, Schröer M et al (2017) Multimodal sensor-based whole-body control for human–robot collaboration in industrial settings. Robot Auton Syst 94:102–119
Brundage MP, Chang Q, Li Y, Arinez J, Xiao G (2016) Sustainable manufacturing performance indicators for a serial production line. IEEE Trans Autom Sci Eng 13(2):676–687
Xu W, Shao L, Yao B, Zhou Z, Pham DT (2016) Perception data-driven optimization of manufacturing equipment service scheduling in sustainable manufacturing. J Manuf Syst 41:86–101
Dubey R, Gunasekaran A, Childe SJ, Wamba SF, Papadopoulos T (2016) The impact of big data on world-class sustainable manufacturing. Int J Adv Manuf Technol 84(1–4):631–645
Atzori L, Iera A, Morabito G (2010) The Internet of Things: a survey. Comput Netw 54(15):2787–2805
ÄwikÅa G (2013) Methods of manufacturing data acquisition for production management - a review. Adv Mater Res 837:618–623
Abrishambaf R, Hashemipour M, Bal M (2013) Structural modeling of industrial wireless sensor and actuator networks for reconfigurable mechatronic systems. Int J Adv Manuf Technol 64(5–8):793–811
Backhaus J, Reinhart G (2015) Digital description of products, processes and resources for task-oriented programming of assembly systems. J Intell Manuf 28(8):1787–1800
Levalle RR, Scavarda M, Nof SY (2013) Collaborative production line control: minimisation of throughput variability and WIP. Int J Prod Res 51(23–24):7289–7307
Hou ZS, Jian-Xin XU (2009) On data-driven control theory: the state of the art and perspective. Acta Automat Sin 35(6):650–667
Li J, Tao F, Cheng Y, Zhao L (2015) Big data in product lifecycle management. Int J Adv Manuf Technol 81(1–4):667–684
Han Q, Venkatasubramanian N (2007) Timeliness-accuracy balanced collection of dynamic context data. IEEE Trans Parallel Distrib Syst 18(2):158–171
Cheng Y, Chen K, Sun H, Zhang Y, Tao F (2017) Data and knowledge mining with big data towards smart production. J Ind Inf Integr 9:1–13. https://doi.org/10.1016/j.jii.2017.08.001
Tao F, Bi L, Zuo Y, Nee AYC (2017) A cooperative co-evolutionary algorithm for large-scale process planning with energy consideration. J Manuf Sci Eng 139(6):061016
Tao F, Bi L, Zuo Y, Nee AYC (2017) Partial/parallel disassembly sequence planning for complex products. J Manuf Sci Eng 140(1):011016
Huang JJ (2016) Resource decision making for vertical and horizontal integration problems in an enterprise. J Oper Res Soc 67(11):1363–1372
Tao F, Zhang L, Liu Y, Cheng Y, Wang L, Xu X (2015) Manufacturing service management in cloud manufacturing: overview and future research directions. J Manuf Sci Eng 137(4):040912
Quintas J, Menezes P, Dias J (2016) Information model and architecture specification for context awareness interaction decision support in cyber-physical human–machine systems. IEEE Trans Human–Mach Syst 47(3):323–331
Zhong RY, Huang GQ, Lan SL, Dai QY, Xu C, Zhang T (2015) A big data approach for logistics trajectory discovery from RFID-enabled production data. Int J Prod Econ 165:260–272
Matsas E, Vosniakos GC, Batras D, Matsas E, Vosniakos GC, Batras D (2018) Prototyping proactive and adaptive techniques for human-robot collaboration in manufacturing using virtual reality. Robot Comput Integr Manuf 50:168–180
Grauer M, Karadgi S, Müller U, Metz D, Schäfer W (2010) Proactive control of manufacturing processes using historical data. International Conference on Knowledge-Based and Intelligent Information and Engineering Systems. Springer, Berlin, Heidelberg, pp 399–408
Moghaddam M, Nof SY (2017) The collaborative factory of the future. Int J Comput Integr Manuf 30:23–43
Dai X, Gao Z (2013) From model, signal to knowledge: a data-driven perspective of fault detection and diagnosis. IEEE T Ind Inform 9(4):2226–2238
Adamson G, Wang L, Moore P (2016) Feature-based control and information framework for adaptive and distributed manufacturing in cyber physical systems. J Manuf Syst 43(2):305–315
Khashei M, Bijari M (2011) A novel hybridization of artificial neural networks and ARIMA models for time series forecasting. J Appl Soft Comput 11:2664–2675
Funding
This work is financially supported in part by National Key Research and Development Program of China (No.2016YFB1101700), National Natural Science Foundation of China (NSFC) under Grant 51705014 and National Natural Science Foundation of China (NSFC) under Grant 51875030. This paper is an expanded version of a paper entitled smart production line: common factors and data-driven implementation method presented at The 12th ASME International Manufacturing Science and Engineering Conference (MSEC2017), June 4-8, 2017, Los Angeles, CA, USA.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Zhang, Y., Cheng, Y., Wang, X.V. et al. Data-driven smart production line and its common factors. Int J Adv Manuf Technol 103, 1211–1223 (2019). https://doi.org/10.1007/s00170-019-03469-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-019-03469-9