Abstract
Carbon fiber reinforced polymer (CFRP) composites gained wide acceptance in aerospace, automotive and marine industries due to their superior properties. It became the major structural material that substitutes metals in many weight-critical components such as the new A350 and the B787 aircrafts, with composite content to exceed the 50%. Although CFRP structures are manufactured to near-net-shape, edge trimming, drilling, sawing, milling, and grinding operations are unavoidable. Being anisotropic, inhomogeneous and highly abrasive, their conventional machining is normally associated with delamination, fibers pull-out, inadequate surface quality, and tool wear. Other nontraditional processes which include abrasive water jet machining (AWJM), ultrasonic machining (USM), and electrodischarge machining (EDM) offer substitute to the conventional methods. Laser beam machining (LBM) is an emerging technology offering an excellent alternative for machining CFRP composites. This paper reviews the research work carried out in the area of LBM of CFRP materials. It reports the experimental and theoretical studies covering the process accuracy in terms kerf width, kerf depth and edge quality, and the thermal characteristics in terms of heat-affected zone (HAZ). Minimizing the kerf taper, increasing kerf depth, and eliminating the HAZ in the polymer matrix are considered the major obstacles of CFRP industrial applications. Methods of improving the machining productivity by reducing the machining time and increasing the material removal rate (MRR) and kerf depth are reviewed. Several mathematical and statistical modeling and optimization techniques have been critically examined. The concept of specific energy and its impact on HAZ and kerf width is introduced. The relationship between laser type and HAZ is discussed. The current work furthermore outlines the possible trends for future research.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Mathew J, Goswami GL, Ramakrishnan N, Naik NK (1999) Parametric studies on pulsed Nd:YAG laser cutting of carbon fibre reinforced plastic composites. J Mater Process Technol 89–90:198–203. https://doi.org/10.1016/S0924-0136(99)00011-4
Hu J, Xu H (2015) Pocket milling of carbon fiber-reinforced plastics using 532-nm nanosecond pulsed laser: an experimental investigation. J Compos Mater 50(20):2861–2869. https://doi.org/10.1177/0021998315614990
Salama A, Li L, Whitehead PM (2016b) TEA CO2 laser machining of CFRP composite. Appl Phys A 122:497. https://doi.org/10.1007/s00339-016-0025-8
Loumena C, Nguyen M, Lopez J, Kling R (2018) Potentials for lasers in CFRP production. Journal of Laser Applications 1026. https://doi.org/10.2351/1.5062378
Herzog D, Schmidt-Lehr M, Canisius M, Oberlander M, Tasche J-P, Emmelmann C (2015) Laser cutting of carbon fibre reinforced plastics using a 30 kW fiber laser. J Laser Appl 27 Number:S28001–S28006. https://doi.org/10.2351/1.4906304
Rao S, Sethi A, Das AK, Mandal N, Kiran P, Ghosh R, Dixit AR, Mandal A. (2017) Fibre laser cutting of CFRP composites and optimization of process parameters through response surface methodology experiment preparation and condition. S Materials and Manufacturing Processes, Volume 32, Issue 14. https://doi.org/10.1080/10426914.2017.1279296
Ushida K, Inami W, Shimamura Y, Kawata Y (2012) Characteristic analysis of CFRP cutting with nanosecond pulsed laser. J Adv Res Phys 3(1):011211
Koenig W, Wulf C, Grass P, Willerchied H (1985) Machining of fiber reinforced plastics. Ann CIRP 34(2):537–548. https://doi.org/10.1016/S0007-8506(07)60186-3
Krishnaraj V, Prabukarthi A, Ramonathan A et al (2012) Optimization of machining parameters at high speed drilling of carbon fiber reinforces composites (CFRP) laminates. Compos Part B 43:1791–1799. https://doi.org/10.1016/j.compositesb.2012.01.007
Wahab MS, Rahim EA, Rahman NA, Uyub MF (2012) Laser cutting characteristic on the laminated carbon fiber reinforced plastic (CFRP) composite of aerospace structure panel. Adv Mater Res 576:503–506. https://doi.org/10.4028/www.scientific.net/AMR.576-503
Negarestani R, Sundar M, Sheikh MA, Mativenga P, Li L, Li ZL, Chu PL, Khin CC, Zheng HY, G C L (2010) Numerical simulation of laser machining of carbon-fibre- reinforced composites. Proc. IMechE Part B: J. Engineering Manufacture 224:1017–1027. https://doi.org/10.1243/09544054JEM1662
Negarestani R, Li L (2013) Fiber laser cutting of carbon fiber reinforced polymeric composites. Proc IMechE Part B, J Eng Manuf 227(12):1755–1766. https://doi.org/10.1177/0954405413490513
El-Hofy M, Helmy MO, Escobar-Palafox G, Kerrigan K, Scaife R, El-Hofy H (2018) Abrasive water jet machining of multidirectional CFRP laminates. Procedia CIRP 68:535–540. https://doi.org/10.1016/j.procir.2017.12.109
Habib S, Okada A (2016) Influence of electrical discharge machining parameters on cutting parameters of carbon fiber-reinforced plastic. Mach Sci Technol 20(1):99–114. https://doi.org/10.1080/10910344.2015.1133914
Habib SS (2014) Modeling of electrical discharge machining of CFRP using artificial neural network technique. JMMA 3(1):22–31
Helmy MO, El-Hofy MH, Hassan E-H (2018) Effect of cutting fluid delivery method on ultrasonic assisted edge trimming of multidirectional CFRP composites at different machining conditions. Procedia CIRP 68:450–455. https://doi.org/10.1016/j.procir.2017.12.077
De Iorio I, Leone C, Lopresto V, Pagano N (2010) Short pulse Nd:YAG laser cutting of CFRP sheet. World J Eng 7:289–290
Riveiro A, Quintero FL, Del Val J, Comesaña R, Boutinguiza M, Pou J (2012) Experimental study on the CO2 laser cutting of carbon fibre reinforced plastic composite. Compos A: Appl Sci Manuf 43(8):1400–1409. https://doi.org/10.1016/j.compositesa.2012.02.012
Salama A, Li L, Mativenga P, Sabli A (2016) High power picosecond drilling/machining of carbon fibre-reinforces polymer (CFRP) composites. Appl Phys A 122(73):1–11
Goeke A, Emmelmann C (2010) Influence of laser cutting parameters on CFRP part quality. Phys Procedia 5:253–258. doi.org/10.1016/j.phpro.2010.08.051
Cenna A, Mathew P (1997) Evaluation of cut quality of fiber reinforced plastics- a review. Int Jr Machine Tools Manuf 37:723–736. https://doi.org/10.1016/S0890-6955(96)00085-5
Li ZL, Zheng HY, Lim GC, Chu PL, Li L (2010) Study on UV laser machining quality of carbon fiber reinforced composites. Composites: Part A 41:1403–1408. https://doi.org/10.1016/j.compositesa.2010.05.017
Kalyyanasundaram D, Gururaja S, Prajakta P, Singh D (2018) Open hole fatigue testing of laser machined MD-CFRPs. Compos Part A 111:33–31
Zaeh MF, Stock JW (2017) Peak stress reduction in the laser contouring of CFRP. CIRP Ann 66(1):249–252. https://doi.org/10.1016/j.compositesa.2018.05.005
Patel P, Gohil P, Rajpurohit S (2013) Laser machining of polymer matrix composites: scope, limitation and application. Int J Eng Trends Technol (IJETT) 4(6):2391–2399
El-Hofy H (2018) Fundamentals of machining processes: conventional and nonconventional processes, Third edn. CRC press, Taylor and Francis Ltd., Boca Raton
Dubey AK, Yadava V (2008) Laser beam machining- a review. Int J Mach Tools Manuf 48:609–628. https://doi.org/10.1016/j.ijmachtools.2007.10.017
Leone C, Genna S (2018) Heat affected zone in pulsed Nd:YAG laser cutting of CFRP. Compos Part B 140:174–182. https://doi.org/10.1016/j.compositesb.2017.12.028
Bluemel S, Jaeschke P, Wippo V, Bastick S, Stute U, Kracht D, Haferkamp H (2012) Laser machining of CFRP using high power fiber laser- investigations on the heat affected zone. 15th European conference on composite materials Venice Italy, 7 p
Leone C, Pagano N, Lopresto V, De Lorio I (2009) Solid state Nd:YAG laser cutting of CFRP sheet: influence of process parameters on kerf geometry and HAZ. 17th International Conference on Composite Materials (ICCM-17) Edinburgh, 10p
Patel RS (2016) Laser machining of CFRP. JEC composites magazine/No105, 46–49
Stock J, Zaeh MF, Conrad M (2012) Remote laser cutting of CFRP: improvements in the cut surface. Phys Procedia 39:161–170. https://doi.org/10.1016/j.phpro.2012.10.026
Yuji S, Masahiro T, Tatsuya N, Kasuki N (2013) Experimental study of CFRP cutting with nanosecond lasers. Trans JWRI 42(1):23–26
Shyha I (2013) An Investigation into CO2 laser trimming of CFRP and GFRP composites. Proc Eng 63:931–937. https://doi.org/10.1016/j.proeng.2013.08.200
Hirsch P, Bastick S, Jeashke P, van den Aker R, Geyer A, Zscheyge M, Michel P (2018) Effect of thermal properties on laser cutting of continuous glass and carbon fiber-reinforced polyamide 6 composites. Mach Sci Technol:1–18. https://doi.org/10.1080/10910344.20181449216
Woon JK, Yousuki k, Seigi K (2013) Ultra high speed laser cutting using a scanner head. Trans JWRI 22(2):9–14
Wahab MS, Rahman NA, Mohamed MAS, Rahim EA (2014) Optimization of laser cutting parameters on the laminated carbon fibre reinforced plastics (CFRP) composites using DoE technique. Appl Mech Mater 660:60–64. https://doi.org/10.4028/www.scientific.net/AMM.6
Herzog D, Schmidt-Lehr M, Oberlander M, Canisius M, Radek M, Emmelmann C (2016) Laser cutting of carbon fiber plastics of high thickness. Mater Des 92:742–749. https://doi.org/10.1016/j.matdes.2015.12.056
Faas S, Freitag C, Boley S, Berger P, Weber R, Graf T (2017) Flow speed of the ablation vapors generated during laser drilling of CFRP with a continuous-wave laser beam. Appl Phys A 123:156. https://doi.org/10.1007/s00339-017-0781-0
Walter J, Hustedt M, Staehr R, Overmeyer L et al (2014) Laser cutting of carbon fiber reinforced plastics–investigation of hazardous process emissions. Phys Procedia 56:1153–1164. https://doi.org/10.1016/j.phpro.2014.08.030
Riveiro A, Quintero F, Lusquiños F, del Val J, Comesaña R, Boutinguiza M, Pou J (2017) Laser cutting of carbon fiber composite materials. Proc Manuf 13:388–395
Onuseita V, Prieß T, Wiedenmann M, Freitag C, Faisst B, Giedl-Wagner R, Rettich T, Weber R, Middendorf P, Graf T (2015) Productive laser processing of CFRP. Lasers in Manufacturing Conference 9p
Sun D, Han F, Ying W, Jin C (2018) Surface integrity of water jet guided laser machining of CFRP. Procedia CIRP 71:71–74. https://doi.org/10.1016/j.procir.2018.05.073
Hira H, Tsuboi A (2011) Study on cutting of CFRP plate by fiber laser. 18th International Conference on Composite Materials, 4 P
Bluemel S, Bastick S, Staehr R, Jaeschke P, Suttmann O, Overmeyer L (2016) Laser cutting of CFRP with a fibre guided high power nanosecond laser source – influence of the optical fibre diameter on quality and efficiency. Phys Procedia 83:328–335. https://doi.org/10.1016/j.phpro.2016.08.034
Pastras G, Fysikopoulos A, Stavropoulos P, Chryssolouris G (2014) An approach to modeling evaporation pulsed laser drilling and its energy efficiency. Int J Adv Manuf Technol 72:1227–1241. https://doi.org/10.1007/s00170-014-5668-z
Onuseita V, Weber R, Wiedenmanna M, Freitaga C, Grafa T (2014) Efficient laser processing of CFRP. 8th international conference on photonic technologies LANE 4p
Bluemel S, Kuklik J, Staehr R, Jaeschke P, Suttmann O, Overmeyer L (2017) Time resolved analysis of nanosecond pulsed laser processing of carbon fiber reinforced plastics. J Laser Appl 29:022406. https://doi.org/10.2351/1.4983242
Niino H, Harada Y, Anzai K, Matsushita M, Furukawa K, Nishino M, Fujisaki A, Miyato T (2016) Laser cutting of carbon fiber reinforced plastics (CFRP and CFRTP) by IR fiber laser irradiation. JLMN-J Laser Micro/Nanoeng 11(1):104–110
Xu H, Hu J (2017) Modeling of the material removal and heat affected zone formation in CFRP short pulsed laser processing. Appl Math Model 46:354–364. https://doi.org/10.1016/j.apm.2017.01.072
Salama A, Yan Y, Li L, Mativenga P, Whitehead D, Sabli A (2016c) Understanding the self-limiting effect in picosecond laser single and multiple parallel pass drilling/machining of CFRP composite and mild steel. Mater Des 107:461–469. https://doi.org/10.1016/j.matdes.2016.06.048
Liu Y-C, Chen-Wu W, Song H-W, Huang C-G (2016) Interaction between pulsed infrared Laser and carbon fiber reinforced polymer composite laminates. Proc SPIE 10152:id. 101520X, 6p. https://doi.org/10.1117/12.2246836
Ohkubo T, Tsukamoto M, Sato Y (2014) Numerical simulation of laser beam cutting of carbon fiber reinforced plastics. Phys Procedia 56:1165–1170. https://doi.org/10.1016/j.phpro.2014.08.031
Oberlander M, Bartsch K, Schulte C, Canisius M, Hergoss P, Herzog D, Emmelmann C (2017) Process monitoring of laser remote cutting of carbon fiber reinforced plastics by means of reflecting laser radiation. J Laser Appl 29(2):022009. https://doi.org/10.2351/1.4980165
Weber R, Hafner M, Michalowski A, Graf T (2011) Minimum damage in CFRP laser processing. Phys Procedia 12, Part B:302–307. https://doi.org/10.1016/j.phpro.2011.03.137
Wolynski A, Herrmann T, Mucha P, Haloui H, L’huillier J (2011) Laser ablation of CFRP using picosecond laser pulses at different wavelengths from UV to IR. Phys Procedia 12:292–301. https://doi.org/10.1016/j.phpro.2011.03.136
Stavropoulos P, Stournaras A, Salonitis K, Chryssolouris G (2010) Experimental and theoretical investigation of the ablation mechanisms during femtosecond laser machining. Int J Nanomanufacturing 6(1/2/3/4):55–65. https://doi.org/10.1504/IJNM.2010.034772
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interests
The authors declare that there is no conflict of interests.
Rights and permissions
About this article
Cite this article
El-Hofy, M.H., El-Hofy, H. Laser beam machining of carbon fiber reinforced composites: a review. Int J Adv Manuf Technol 101, 2965–2975 (2019). https://doi.org/10.1007/s00170-018-2978-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-018-2978-6