Abstract
Structural and mechanical characterization of electron beam additive manufactured stainless steel samples has been carried out. The XRD measured austenite and ferrite lattice parameters showed their sensitivity to the heat input value, which was related to the chromium atom redistribution. The ferrite content depended on the heat input too. Optimal heat input level has been detected, which allowed obtaining the tensile strength higher than that of the base stainless steel. Residual strain levels in the as-deposited metal and fusion line zone have been measured using the X-ray sin2ψ method. The highest tensile residual strain was determined in a fusion line zone between the first as-deposited layer and a substrate. The microstructure of the first fusion line zone contained deformation twins and entangled dislocations generated by plastic flow under thermal expansion-contraction cycles.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
DebRoy T, Wei HL, Zuback JS, Mukherjee T, Elmer JW, Milewski JO, Beese AM, Wilson-Heid A, De A, Zhang W (2018) Additive manufacturing of metallic components – process, structure and properties. Prog Mater Sci 92:112–224
Fuchs J, Schneider C, Enzinger N (2018) Wire-based additive manufacturing using an electron beam as heat source. Welding World. https://doi.org/10.1007/s40194-017-0537-7
Taminger KM, Hafley RA (2006) Electron beam freeform fabrication for cost effective near-net shape manufacturing. NATO/RTOAVT-139, Amsterdam
Taminger K (2009) Electron beam freeform fabrication. Adv Mater Process 167:45
Gockel J, Beuth J, Taminger KM (2014) Integrated control of solidification microstructure and melt pool dimensions in electron beam wire feed additive manufacturing of Ti-6Al-4V. Addit Manuf 1-4:119–126
Baufeld B, Widdison R, Dutilleul T, Bridger K (2016) Electron beam additive manufacturing at the nuclear AMRC. Elektronika ir Elektrotechnika 51:25–30
Kovalchuk D, Melnyk V, Melnyk I, Tugai B (2016) Prospects of application of gas-discharge electron beam guns in additive manufacturing. Elektronika ir Elektrotechnika 51:36–42
Baufeld B, Widdison R, Dutilleul T (2017) Wire based electron beam additive manufacturing, 70th IIW assembly and international conference Shanghai, China
Węglowski MS, Błacha S, Pilarczyk J, Dutkiewicz J, Rogal Ł (2018) Electron beam additive manufacturing with wire - analysis of the process. AIP Conf Proc 1960:140015
Fuchs J, Schneider C, Enzinger N (2018) Wire-based additive manufacturing using an electron beam as heat source. Welding World 62:267–275
Ding D, Pan Z, Cuiuri D, Li H (2015) Wire-feed additive manufacturing of metal components: technologies, developments and future interests. J Adv Manuf Technol 81:465–481. https://doi.org/10.1007/s00170-015-7077-3
Inoue H, Koseki T, Ohkita S, Fuji M (2000) Formation mechanisms of vermicular and lacy ferrite in austenitic stainless steel weld metals. Sci Technol Weld Join 5(6):385–396
Degterev AS, Gnyusov SF, Tarasov SY (2017) Structural modification in a re-heated bead-overlapping zone of the multiple-pass plasma-transferred arc Fe-Cr-V-Mo-C coating. Surf Coat Technol 329:272–280
Yadroitsev I, Yadroitsava I (2015) Evaluation of residual stress in stainless steel 316L and Ti6Al4V samples produced by selective laser melting. Virtual Phys Prototyp 2:67–76. @@https://doi.org/10.1080/17452759.2015.1026045
Gnyusov SF, Ignatov AA, Durakov VG, Tarasov SY (2012) The effect of thermal cycling by electron-beam surfacing on structure and wear resistance of deposited M2 steel. Appl Surf Sci 263:215–222
Unnikrishnan R, Satish Idury KSN, Ismail TP, Bhadauri A, Shekhawat SK, Khatirkar RK, Sapate SG (2014) Effect of heat input on the microstructure, residual stresses and corrosion resistance of 304L austenitic stainless steel weldments. Mater Charact 93:10–23. https://doi.org/10.1016/j.matchar.2014.03.013
Wang Z, Palmer TA, Beese AM (2016) Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing. Acta Mater 110:226–235. https://doi.org/10.1007/s00170-015-7077-3
Phama MS, Dovgyy B, Hooper PA (2017) Twinning induced plasticity in austenitic stainless steel 316L made by additive manufacturing. Mater Sci Eng A 704:102–111
Funding
This work was financially supported by the Russian Federation Ministry of Education and Science (agreement no 14.610.21.0013, project identifier RFMEFI61017X0013).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tarasov, S.Y., Filippov, A.V., Savchenko, N.L. et al. Effect of heat input on phase content, crystalline lattice parameter, and residual strain in wire-feed electron beam additive manufactured 304 stainless steel. Int J Adv Manuf Technol 99, 2353–2363 (2018). https://doi.org/10.1007/s00170-018-2643-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-018-2643-0