Abstract
By adjusting the rotation speed of separated pin and assisted shoulder, dual-rotation friction stir welding can reduce the softened region and improve the properties of joint. In this study, a tool system for dual-rotation friction stir welding was designed. Five-millimeter-thick 6061-T6 aluminum alloy was welded using the self-designed tool system. The effects of rotation speed of assisted shoulder on microstructure and mechanical properties of joints were analyzed. Defect-free joints were obtained under the process parameters used. Fine equiaxed recrystallized grains were found in both weld nugget zone and shoulder affected zone, while the grain size in shoulder affected zone appeared to be much smaller. The microhardness showed a noticeable decline in the weld zone, and the lowest value was located in heat-affected zone. Tensile test results demonstrated that all welded joints fractured at the interface of thermo-mechanically affected zone and heat-affected zone with ductile fracture mode.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Miller WS, Zhuang L, Bottema J, Wittebrooda AJ, Smetb PD, Haszlerc A, Viereggec A (2000) Recent development in aluminium alloys for the automotive industry. Mater Sci Eng A 280(1):37–49
Dursun T, Soutis C (2014) Recent developments in advanced aircraft aluminium alloys. Mater Des 56(4):862–871
Lakshminarayanan AK, Balasubramanian V, Elangovan K (2009) Effect of welding processes on tensile properties of AA6061 aluminium alloy joints. Int J Adv Manuf Technol 40(3–4):286–296
Sánchez-Amaya JM, Delgado T, González-Rovira L, Botana FJ (2009) Laser welding of aluminium alloys 5083 and 6082 under conduction regime. Appl Surf Sci 255(23):9512–9521
Ion JC (2013) Laser beam welding of wrought aluminium alloys. Sci Technol Weld Join 5(5):265–276
Rohde M, Markert C, Pfleging W (2010) Laser micro-welding of aluminum alloys: experimental studies and numerical modeling. Int J Adv Manuf Technol 50(1–4):207–215
Sheikhi M, Ghaini FM, Assadi H (2015) Prediction of solidification cracking in pulsed laser welding of 2024 aluminum alloy. Acta Mater 82:491–502
Thomas WM (1991) Friction stir butt welding. International Patent Application No. PCT/GB92/0220
Threadgill PL, Leonard AJ, Shercliff HR, Withers PJ (2009) Friction stir welding of aluminium alloys. Int Mater Rev 54(2):49–93
Çam G, Mistikoglu S (2014) Recent developments in friction stir welding of Al-alloys. J Mater Eng Perform 23(6):1936–1953
Çam G, İpekoğlu G (2016) Recent developments in joining of aluminum alloys. Int J Adv Manuf Technol 91(5–8):1–16
Ma ZY, Feng AH, Chen DL, Shen J (2017) Recent advances in friction stir welding/processing of aluminum alloys: microstructural evolution and mechanical properties. Crit Rev Solid State 43(1):1–65
Shah PH, Badheka VJ (2017) Friction stir welding of aluminium alloys: an overview of experimental findings—process, variables, development and applications. P I Mech Eng L-J Mat
Murr LE, Liu G, Mcclure JC (1998) A TEM study of precipitation and related microstructures in friction-stir-welded 6061 aluminium. J Mater Sci 33(5):1243–1251
Liu H, Maeda M, Fujii H, Nogi K (2003) Tensile properties and fracture locations of friction-stir welded joints of 1050-H24 aluminum alloy. J Mater Sci Lett 22(1):41–43
Rajakumar S, Muralidharan C, Balasubramanian V (2011) Predicting tensile strength, hardness and corrosion rate of friction stir welded AA6061-T6 aluminium alloy joints. Mater Des 32(5):2878–2890
Thomas WM, Norris IM, Staines DG, Watts ER (2012) Friction stir welding—process developments and variant techniques. Weld Int 17(11):852–855
Widener CA, Talia JE, Tweedy BM, Burford DA (2006) High-rotational speed friction stir welding with a fixed shoulder. Proceedings of 6th International Friction Stir Welding Symposium; Montreal, Canada
Crawford R, Bloodworth T, Cook GE, Strauss AM, Hartman DA (2006) High speed friction stir welding process modeling. In: 6th International Symposium on Friction Stir Welding, Montreal, Canada, 10–13 October
Ji SD, Meng XC, Liu JG, Zhang LG, Gao SS (2014) Formation and mechanical properties of stationary shoulder friction stir welded 6005A-T6 aluminum alloy. Mater Des 62(10):113–117
Liu HJ, Li JQ, Duan WJ (2013) Friction stir welding characteristics of 2219-T6 aluminum alloy assisted by external non-rotational shoulder. Int J Adv Manuf Technol 64(9–12):1685–1694
Li D, Yang X, Cui L, He F, Shen H (2014) Effect of welding parameters on microstructure and mechanical properties of AA6061-T6 butt welded joints by stationary shoulder friction stir welding. Mater Des 64:251–260
Li JQ, Liu HJ (2013) Characteristics of the reverse dual-rotation friction stir welding conducted on 2219-T6 aluminum alloy. Mater Des 45(6):148–154
Li JQ, Liu HJ (2013) Effects of welding speed on microstructures and mechanical properties of AA2219-T6 welded by the reverse dual-rotation friction stir welding. Int J Adv Manuf Technol 68(9–12):2071–2083
Li JQ, Liu HJ (2015) Effects of the reversely rotating assisted shoulder on microstructures during the reverse dual-rotation friction stir welding. J Mater Sci Technol 31(4):375–383
Shi L, Wu CS, Liu HJ (2014) Numerical analysis of heat generation and temperature field in reverse dual-rotation friction stir welding. Int J Adv Manuf Technol 74(1–4):319–334
Shi L, Wu CS, Liu HJ (2014) Modeling the material flow and heat transfer in reverse dual-rotation friction stir welding. J Mater Eng Perform 23(8):2918–2929
Schmidt H, Hattel J, Wert J (2014) An analytical model for the heat generation in friction stir welding. Model Simul Mater Sci Eng 12(1):143
Khandkar MZH, Khan JA, Reynolds AP (2003) Prediction of temperature distribution and thermal history during friction stir welding: input torque based model. Sci Technol Weld Join 8(3):165–174
Chen HB, Yan K, Lin T, Chen SB, Jiang CY, Zhao Y (2006) The investigation of typical welding defects for 5456 aluminum alloy friction stir welds. Mater Sci Eng A 433(1–2):64–69
Chen YC, Liu HJ, Feng JC (2006) Friction stir welding characteristics of different heat-treated-state 2219 aluminum alloy plates. Mater Sci Eng A 420(1–2):21–25
Hu HE, Zhen L, Yang L, Shao WZ, Zhang BY (2008) Deformation behavior and microstructure evolution of 7050 aluminum alloy during high temperature deformation. Mater Sci Eng A 488(1–2):64–71
Funding
The research was sponsored by the National Natural Science Foundation of China (No. 51775143), the National Science and Technology Major Project (No. 2017ZX04005001), the National Defense Industrial Technology Development Program (No. JCKY2017203B066), and the State Key Lab of Advanced Metals and Materials (No. 2017-Z06).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhou, L., Zhang, R.X., Hu, X.Y. et al. Effects of rotation speed of assisted shoulder on microstructure and mechanical properties of 6061-T6 aluminum alloy by dual-rotation friction stir welding. Int J Adv Manuf Technol 100, 199–208 (2019). https://doi.org/10.1007/s00170-018-2570-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-018-2570-0