Abstract
Microstructures with proper patterns have an important influence on the functional surface performance of products, including changing surface wettability for different application environments. This paper proposed a method of feed-direction ultrasonic vibration-assisted turning (FUVAT) for fast generation of micro-textured surface. The generation mechanism of surface microstructures was presented by analyzing cutting trajectory and simulating surface topography. Surface texturing experiments were performed on copper 1100. The results show that micro-dimples with regular arrangement and different dimension were successfully obtained on cylindrical surface by controlling proper processing parameters. Several key parameters including amplitude, feed rate, and spindle speed play an important influence on the patterns and shapes of microstructures. The experimental textured surfaces show different wetting properties through wetting tests. It is verified that the FUVAT can be a feasible way to fabricate micro-textured surfaces.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bruzzone AAG, Costa HL, Lonardo PM, Lucca DA (2008) Advances in engineered surfaces for functional performance. CIRP Ann Manuf Technol 57(2):750–769
Li XM, Reinhoudt D, Crego-Calama M (2007) What do we need for a superhydrophobic surface? A review on the recent progress in the preparation of superhydrophobic surfaces. Chem Soc Rev 36:1350–1368
Baburaja EG, Starikov D, Evans J, Shafeev GA, Bensaoula A (2007) Enhancement of adhesive joint strength by laser surface modification. Int J Adhes Adhes 27(4):268–276
Quere D (2005) Non-sticking drops. Rep Prog Phys 68(11):2495–2532
Rotella G, Alfano M, Candamano S (2015) Surface modification of Ti6Al4V alloy by pulsed Yb-laser irradiation for enhanced adhesive bonding. CIRP Ann Manuf Technol 64(1):527–530
Xu SL, Shimada K, Mizutani M, Kuriyagawa T (2017) Development of a novel 2D rotary ultrasonic texturing technique for fabricating tailored structures. Int J Adv Manuf Technol 89:1161–1172
Brehl DE, Dow TA (2008) Review of vibration-assisted machining. Precis Eng 32(3):153–172
Kumabe J, Fuchizawa K, Soutome T, Nishimoto Y (1989) Ultrasonic superposition vibration cutting of ceramics. Precis Eng 11(2):71–77
Zhou M, Wang XJ, Ngoi BKA, Gan JGK (2002) Brittle-ductile transition in the diamond cutting of glasses with the aid of ultrasonic vibration. J Mater Process Technol 121:243–251
Liu K, Li XP, Rahman M (2008) Characteristics of ultrasonic vibration-assisted ductile mode cutting of tungsten carbide. Int J Adv Manuf Technol 35(7):833–841
Zhou M, Eow YT, Ngoi BK, Lim EN (2003) Vibration-assisted precision machining of steel with PCD tools. Mater Manuf Process 18(5):825–834
Zhou M, Ngoi BKA, Yusoff MN, Wang XJ (2006) Tool wear and surface finish in diamond cutting of optical glass. J Mater Process Technol 17:29–33
Moriwaki T, Shamoto E (1991) Ultraprecision diamond turning of stainless steel by applying ultrasonic vibration. CIRP Ann Manuf Technol 40(1):559–562
Zhang JG, Cui T, Ge C, Sui YX, Yang HJ (2016) Review of micro/nano machining by utilizing elliptical vibration cutting. Int J Mach Tools Manuf 106:109–126
Guo P, Ehmann KF (2013) An analysis of the surface generation mechanics of the elliptical vibration texturing process. Int J Mach Tools Manuf 64:85–95
Guo P, Lu Y, Ehmann KF, Cao J (2014) Generation of hierarchical micro structures for anisotropic wetting by elliptical vibration cutting. CIRP Ann Manuf Technol 63:553–556
Xu SL, Shimada K, Mizutani M, Kuriyagawa T (2014) Fabrication of hybrid micro/nano-textured surfaces using rotary ultrasonic machining with one-point diamond tool. Int J Mach Tools Manuf 86:12–17
Xu SL, Shimada K, Mizutani M, Kuriyagawa T (2016) Analysis of machinable structures and their wettability of rotary ultrasonic texturing method. Chin J Mach Eng 29(6):1187–1192
Schubert A, Nestler A, Pinternagel S, Zeidler H (2011) Influence of ultrasonic vibration assistance on the surface integrity in turning of the aluminium alloy AA2017. Mater Werkst 42(7):658–665
Nestler A, Schubert A (2014) Surface properties in ultrasonic vibration assisted turning of particle reinforced aluminium matrix composites. Procedia CIRP 13:125–130
Zhang R, Steinert P, Schubert A (2014) Microstructuring of surfaces by two-stage vibration assisted turning. Procedia CIRP 14:136–141
Sallady SA, Nouri Hossein Abadi H, Amini S, Nosouhi R (2016) Analytical and experimental study of topography of surface texture in ultrasonic vibration assisted turning. Mater Design 93:311–323
Qin LG, Lin P, Zhang YL, Dong GN, Zeng QF (2013) Influence of surface wettability on the tribological properties of laser textured Co–Cr–Mo alloy in aqueous bovine serum albumin solution. Appl Surf Sci 268:79–86
Funding
This work was supported by the National Science Fund of China (NSFC), No. 51475275.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, X., Wu, D. & Zhang, J. Fabrication of micro-textured surface using feed-direction ultrasonic vibration-assisted turning. Int J Adv Manuf Technol 97, 3849–3857 (2018). https://doi.org/10.1007/s00170-018-2082-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-018-2082-y