Abstract
The high-frequency tool-workpiece vibration in micro-grinding plays a pivotal role in influencing surface generation in micro-grinding. To overcome the problems coming with the process vibration, this paper presents the implementation and testing of an active vibration control platform that can be used to suppress the high-frequency relative vibrations between the tool and the workpiece during the micro-grinding processes. The platform with small actuator displacement and high-resonance frequency is applied as workpiece holding platform and can cancel vibration in real time by sensing the tool vibration with the vibrometer. The active control system developed here is based on an adaptive filtering algorithm; the tool vibrations and relative vibrations in micro-grinding process are treated as system disturbances and control target respectively. Cutting experiments are performed to demonstrate the vibration reduction and to validate the effectiveness of the control system; the results show that the developed system works well in micro-grinding vibration cancelation.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Liang SY (2006) Mechanical machining and metrology at micro/nano scale. Proc of SPIE 6280, Third International Symposium on Precision Mechanical Measurements, 628002
Aurich JC, Engmann J, Schueler GM, Haberland R (2009) Micro grinding tool for manufacture of complex structures in brittle materials. CIRP Ann Manuf Technol 58(1):311–314
Hassui A, Diniz AE (2003) Correlating surface roughness and vibration on plunge cylindrical grinding of steel. Int J Mach Tool Manuf 43(8):855–862
Cao Y, Guan J, Li B, Chen X, Yang J, Gan C (2013) Modeling and simulation of grinding surface topography considering wheel vibration. Int J Adv Manuf Technol 66(5–8):937–945
Chen J, Fang Q, Li P (2015) Effect of grinding wheel spindle vibration on surface roughness and subsurface damage in brittle material grinding. Int J Mach Tools Manuf 91:12–23
Chen S, Cheung C, Zhao C, Zhang F (2017) Simulated and measured surface roughness in high-speed grinding of silicon carbide wafers. Int J Adv Manuf Technol 91(1–4):719–773
Wang X, Yu T, Dai Y, Shi Y, Wang W (2016) Kinematics modeling and simulating of grinding surface topography considering machining parameters and vibration characteristics. Int J Adv Manuf Technol 87(9):2459–2470
Grigoriev SN, Starkov VK, Gorin NK, Krajnik P, Kopač J (2014) Creep-feed grinding: an overview of kinematics, parameters and effects on process efficiency. Strojniški vestnik J Mech Eng 60(4):213–220
Barrenetxea D, Marquinez JI, Alvarez J, Fernandez R, Gallego I, Madariaga J, Garitaonaindia I (2012) Model-based assistant tool for the setting-up and optimization of centerless grinding process [J]. Mach Sci Technol 16:501–523
Pawar PJ, Rao RV, Davim JP (2010) Multiobjective optimization of grinding process parameters using particle swarm optimization algorithm. Mater Manuf Process 25(6):424–431
Duncan GS, Tummond MF, Schmitz TL (2005) An investigation of the dynamic absorber effect in high-speed machining. Int J Mach Tools Manuf 45(4–5):497–507
Muhammad BB, Wan M, Feng J, Zhang W (2017) Dynamic damping of machining vibration: a review. Int J Adv Manuf Technol 89(9):2935–2952
Ganguli A, Deraemaeker A, Preumont A (2007) Regenerative chatter reduction by active damping control. J Sound Vib 300:847–862
Tewani SG, Rouch KE, Walcott BL (1995) A study of cutting process stability of a boring bar with active dynamic absorber. Int J Mach Tools Manuf 35(1):91–108
Zhang YM, Sims ND (2005) Milling workpiece chatter avoidance using piezoelectric active damping: a feasibility study. Smart Mater Struct 14:65–70
Chen F, Liu G (2017) Active damping of machine tool vibrations and cutting force measurement with a magnetic actuator. Int J Adv Manuf Technol 89:691–700
El-Sinawi AH, Kashani R (2005) Improving surface roughness in turning using optimal control of tool’s radial position. J Mater Process Technol 167:54–61
Al-Zaharnah IT (2006) Suppression vibration of machining processes in both feed and radial directions using optimal control strategy: the case of interrupted cutting. J Mater Process Technol 172:305–310
Zhang X, Shinshi T, Li L, Shimokohbe A (2003) A combined repetitive control for precision rotation of magnetic bearing. Precis Eng 27:273–282
Rashid A, Nicolescu CM (2006) Active vibration control in palletised workholding system for milling. Int J Mach Tools Manuf 46:1626–1636
Brecher C, Manoharan D, Ladra U, Köpken HG (2010) Chatter suppression with an active workpiece holder. Prod Eng 4:239–245
Long X, Jiang H, Meng G (2013) Active vibration control for peripheral milling processes. J Mater Process Technol 213(5):660–670
Guo M, Li B, Yang J, Liang SY (2016) Influence of dynamic force on vibration of micro-machine tool spindle. Proceedings of the International Conference on Advanced Materials, Structures and Mechanical Engineering, 217–222
Test LMS (2009) Lab User manual. LMS INTERNATIONAL, Leuven
Kuo SM, Morgan DR (1999) Active noise control: a tutorial review. Proc IEEE 87(6):943–973
Ponce-Cruz P, Ramrez-Figueroa FD (2010) Intelligent Control Systems with LabVIEW. Springer, London
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jiang, X., Guo, M. & Li, B. Active control of high-frequency tool-workpiece vibration in micro-grinding. Int J Adv Manuf Technol 94, 1429–1439 (2018). https://doi.org/10.1007/s00170-017-1015-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-017-1015-5