Abstract
The effects of heat treatment on the microstructures and mechanical properties of tungsten inert gas-welded AZ31 magnesium alloy joints with Cr2O3 flux coating were investigated by microstructural observations, microhardness, and tensile tests. The results showed that the activating flux of Cr2O3 improved the weld penetration and the depth/width ratio of the tungsten inert gas-welded AZ31 magnesium alloy joints markedly. Heat treatment (1) eliminated the coarsened network-like β-Mg17(Al, Zn)12 particles which formed in activating tungsten inert gas and (2) resulted in more uniform grain size distribution of partially melted zone. Apart from that, either the microhardness of the seams, the ultimate tensile strength, or the elongation of the welded joints was improved by aging treatment, while too high aging temperature would give rise to a sharply decreased ultimate tensile strength.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Westengen H (2000) Magnesium die casting: from ingots to automotive parts. Light Metal 58:44–52
Razalrose A, Manisekar K, Balasubramanian V, Rajakumar S (2012) Prediction and optimization of pulsed current tungsten inert gas welding parameters to attain maximum tensile strength in AZ61A magnesium alloy. Mater Design 37:334–348
Nasiri AM, Weckman DC, Zhou Y (2015) Interfacial microstructure of laser brazed AZ31B magnesium to Snplated steel sheet. Weld J 94:61–72
Luo Y, Ye H, Du CH, Xu HB (2012) Influence of focusing thermal effect upon AZ91D magnesium alloy weld during vacuum electron beam welding. Vacuum 86:1262–1267
Pan FS, Xu AL, Deng D, Ye JH, Jiang XQ, Tang A, Ran Y (2016) Effects of friction stir welding on microstructure and mechanical properties of magnesium alloy Mg-5Al-3Sn. Mater Design 110:266–274
Tathgir S, Bhattacharya A, Bera TK (2015) Influence of current and shielding gas in TiO2 flux activated TIG welding on different graded steels. Mater Manuf Process 30:1115–1123
Tathgir S, Bhattacharya A (2016) Activated-TIG welding of different steels: influence of various flux and shielding gas. Mater Manuf Process 31:335–342
Modenesi PJ, Neto PC, Apolinário ER, Dias KB (2015) Effect of flux density and the presence of additives in ATIG welding of austenitic stainless steel. Weld Int 29:425–432
Li QM, Wang XH, Zou ZD, Wu J (2007) Effect of activating flux on arc shape and arc voltage in tungsten inert gas welding. T Nonferr Metal Soc 17:486–490
Liu FY, Yang CL, Lin SB, Wu L, Su S (2003) Effect of weld microstructure on weld properties in A-TIG welding of titanium alloy. T Nonferr Metal Soc 13:876–880
Li Q, Wu AP, Li YJ, Wang GQ, Yan DY, Liu J (2015) Influence of temperature cycles on the microstructures and mechanical properties of the partially melted zone in the fusion welded joints of 2219 aluminum alloy. Mater Sci Eng A 623:38–48
Stern A, Munitz A (1999) Partially melted zone microstructural characterization from gas tungsten–arc bead on plate welds of magnesium AZ91 alloy. J Mater Sci Lett 18:853–855
Peng D, Shen J, Tang Q, Wu CP, Zhou YB (2013) Effects of aging treatment and heat input on the microstructures and mechanical properties of TIG-welded 6061-T6 alloy joints. Int J Miner Metal Mater 20:259–265
Sharma C, Dwivedi DK, Kumar P (2013) Effect of post weld heat treatments on microstructure and mechanical properties of friction stir welded joints of Al–Zn–Mg alloy AA7039. Mater Design 43:134–143
Ramkumar KD, Ramanand R, Ameer A, Aghil KS, Arivazhagan N (2016) Effect of post weld heat treatment on the microstructure and tensile properties of activated flux TIG welds of Inconel X750. Mater Sci Eng A 658:326–338
Xu JL, Chen C (2004) The research of materials microstructure analysis. Acta Metrologica Sinica 25:369–373
Liang GL, Yuan SQ (2008) Study on the temperature measurement of AZ31B magnesium alloy in gas tungsten arc welding. Mater Lett 62:2282–2284
Liu LM, Dong CF (2006) Gas tungsten-arc filler welding of AZ31 magnesium alloy. Mater Lett 60:2194–2197
Kou S (2002) Welding metallurgy, 2nd edn. Wiley-Interscience, Hoboken
Villars P, Prince A, Okamoto H (1990) Handbook of ternary alloy phase diagrams. American Society for Metals, Metals Park
Wang L, Shen J, Xu N (2011) Effects of TiO2 coating on the microstructures and mechanical properties of tungsten inert gas welded AZ31 magnesium alloy joints. Mater Sci Eng A 528:7276–7284
Kupczyk J (2006) Application of significance tests in quantitative metallographic analysis of a C-Mn-B steel 81: 171–175
Zhang Z, Chen DL (2006) Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength. Scripta Mater 54:1321–1326
Feng YQ, Li Y, Luo Z, Ling ZX, Wang ZM (2016) Resistance spot welding of Mg to electro-galvanized steel with hot-dip galvanized steel interlayer. J Mater Process Tech 236:114–122
Wang LF, Mostaed E, Cao XQ, Huang GS, Fabrizi A, Bonollo F, Chi CZ, Vedani M (2016) Effects of texture and grain size on mechanical properties of AZ80 magnesium alloys at lower temperatures. Mater Design 89:1–8
Tsai TC, Chou CC, Tsai DM, Chiang KT (2011) Chiang modeling and analyzing the effects of heat treatment on the characteristics of magnesium alloy joint welded by the tungsten-arc inert gas welding. Mater Design 32:4187–4194
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhou, M., Shen, J., Hu, D. et al. Effects of heat treatment on the activated flux TIG-welded AZ31 magnesium alloy joints. Int J Adv Manuf Technol 92, 3983–3990 (2017). https://doi.org/10.1007/s00170-017-0348-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-017-0348-4