Abstract
Laser cutting of carbon steel is extensively used across a range of industries, due to its advantage of high speed, low kerf and high quality. Currently, a 1-kW carbon dioxide (CO2) laser with its subsonic nozzle assembly can be used only to cut steel plates up to around 10 mm. This paper aims to design and evaluate a high-pressure supersonic laser cutting nozzle assembly, which can enable a 1-kW CO2 laser to cut steel of up to 50 mm thickness. Basic gas dynamic and compressible flow equations were used to design the supersonic nozzle assembly. The flow of the high-pressure gas jet inside the nozzle assembly was investigated using computational fluid dynamics (CFD), and the structural integrity of the high-pressure nozzle assembly was ensured using finite element analysis (FEA). The gas flow pattern at the exit of the nozzle assembly was computed and compared with the experimental observation made through a shadowgraph technique. Laser cutting experiments were performed with the developed supersonic nozzle assembly to demonstrate cutting of 50-mm-thick low carbon steel with 1-kW CO2 laser.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Powell, J. and A. Kaplan (2004) Laser cutting: from first principles to the state of the art. In Proceedings of the 1st Pacific International Conference on Application of Lasers and Optics, Melbourne
Powell J et al (2011) Fibre laser cutting of thin section mild steel: an explanation of the ‘striation free’effect. Opt Lasers Eng 49(8):1069–1075
Sullivan A, Houldcroft P (1967) Gas-jet laser cutting. Br Weld J 14(8):443–445
Powell J (1993) CO2 laser cutting, vol 214. Springer-Verlag, Berlin
Li L, Sobih M, Crouse P (2007) Striation-free laser cutting of mild steel sheets. CIRP Annals-Manufacturing Technology 56(1):193–196
Teixidor D, Ciurana J, Rodriguez CA (2014) Dross formation and process parameters analysis of fibre laser cutting of stainless steel thin sheets. Int J Adv Manuf Technol 71(9–12):1611–1621
Molian P (1993) Dual-beam CO2 laser cutting of thick metallic materials. J Mater Sci 28(7):1738–1748
Alfille JP, Pilot G, de Prunele D (1996) New pulsed YAG laser performances in cutting thick metallic materials for nuclear applications. In: Lasers, optics, and vision for productivity in manufacturing I. International Society for Optics and Photonics, pp 134–144
Wandera C, Kujanpää V, Salminen A (2011) Laser power requirement for cutting thick-section steel and effects of processing parameters on mild steel cut quality. Proc Inst Mech Eng B J Eng Manuf 225(5):651–661
O’Neill W, Gabzdyl JT (2000) New developments in laser-assisted oxygen cutting. Opt Lasers Eng 34(4–6):355–367
Sundar M et al (2009) Effect of process parameters on the cutting quality in lasox cutting of mild steel. Int J Adv Manuf Technol 40(9):865–874
Zhang C et al (2016) Evaluation and optimal design of supersonic nozzle for laser-assisted oxygen cutting of thick steel sections. Int J Adv Manuf Technol:1–9
Riveiro A et al (2011) Effects of processing parameters on laser cutting of aluminium–copper alloys using off-axial supersonic nozzles. Appl Surf Sci 257(12):5393–5397
Fieret J, Terry MJ, Ward BA (1986) Aerodynamic interactions during laser cutting. In: Proceedings of SPIE 0668, Laser Processing: Fundamentals, Applications, and Systems Engineering, vol 53. doi:10.1117/12.938884
Ward, B. (1984) Supersonic characteristics of nozzles used with lasers for cutting. Proceedings of ICALEO, Boston p. 94–101
Man H, Duan J, Yue T (1997) Design and characteristic analysis of supersonic nozzles for high gas pressure laser cutting. J Mater Process Technol 63(1):217–222
Man H, Duan J, Yue T (1998) Dynamic characteristics of gas jets from subsonic and supersonic nozzles for high pressure gas laser cutting. Optics & Laser Technology 30(8):497–509
John H, Harvey P (1991) Theory and design of pressure vessels. Van Nostrand Reinhold, New York
Anderson JD (1990) Modern compressible flow: with historical perspective, vol 12. McGraw-Hill, New York
ANSYS help documentation. (2013) ANSYS, Inc. Theory Release. 14
Patankar, S. (1980) Numerical heat transfer and fluid flow. CRC press
Matthews, C. (2001) Engineers’ guide to pressure equipment. Professional Engineering Publishing Limited, London and Bury St Edmunds, UK, ISBN. 1(86058298): p. 2
Masuda W, Nakamura T (1993) Effects of nozzle contour on the aerodynamic characteristics of underexpanded annular impinging jets. JSME International Journal Series B 36(2):238–244
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Marimuthu, S., Nath, A.K., Dey, P.K. et al. Design and evaluation of high-pressure nozzle assembly for laser cutting of thick carbon steel. Int J Adv Manuf Technol 92, 15–24 (2017). https://doi.org/10.1007/s00170-017-0107-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-017-0107-6