Abstract
With the enhancement in the functional integration of components and concentration on lightweight materials, complex sheet metal parts are widely used in automobile and aviation industrial clusters. Consequently, the sheet hydroforming process has become an attractive fabricating technology for forming lightweight materials and complicated products. In this research, the hydrodynamic deep drawing (HDD) process of a composite conical box with double concave cavities was investigated through theoretical analysis, numerical simulation, and process experimentation. Furthermore, the process window diagram (PWD) was calculated using the stress analytical model combining material properties with workpiece geometrical features. The influence of cavity pressure loading locus on the forming quality of the fabricated part and the deformation behavior of aluminum alloy was explored. The forming results indicated that the initial pressure, full pressure, and loading locus are the fundamental parameters directly related to the forming quality and dimensional accuracy. For the conical part with composite features, the reasonable initial pressure value is crucial for the thickness homogeneity of the double concave characteristics, whereas the magnitude of the full pressure is vital for improving the quality of the conical feature. In addition, the optimal loading locus of the cavity pressure is characterized by two turning points, which are related to the punch corner radius, die shoulder radius, blank thickness, and angle of the conical feature.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Zhang SH, Wang ZR, Xu Y, Wang ZT, Zhou LX (2004) Recent developments in sheet hydroforming technology. J Mater Proc Tech 151:237–241
Lang L, Danckert J, Nielsen KB (2004) Study on hydromechanical deep drawing with uniform pressure onto the blank. Int J Mach Tool Manu 44:495–502
Dursun T, Soutis C (2014) Recent developments in advanced aircraft aluminium alloys. Mater Des 56:862–871
Singh SK, Ravi Kumar D (2008) Effect of process parameters on product surface finish and thickness variation in hydro-mechanical deep drawing. J Mater Proc Tech 204:169–178
Chen Y, Liu W, Xu Y, Yuan S (2015) Analysis and experiment on wrinkling suppression for hydroforming of curved surface shell. Int J Mech Sci 104:112–125
Wang H, Gao L, Chen M (2011) Hydrodynamic deep drawing process assisted by radial pressure with inward flowing liquid. Int J Mech Sci 53:793–799
Hashemi A, Hoseinpour GM, Seyedkashi SMH (2015) Process window diagram of conical cups in hydrodynamic deep drawing assisted by radial pressure. T Nonferr Metal Soc 25:3064–3071
Bagherzadeh S, Mirnia MJ, Mollaei Dariani B (2015) Numerical and experimental investigations of hydro-mechanical deep drawing process of laminated aluminum/steel sheets. J Manu Proc 18:131–140
Abedrabbo N, Zampaloni MA, Pourboghrat F (2005) Wrinkling control in aluminum sheet hydroforming. Int J Mech Sci 47:333–358
Wang X, Cao J (2000) On the prediction of side-wall wrinkling in sheet metal forming processes. Int J Mech Sci 42:2369–2394
Shafaat MA, Abbasi M, Ketabchi M (2011) Investigation into wall wrinkling in deep drawing process of conical cups. J Mater Proc Tech 211:1783–1795
Meng B, Wan M, Yuan S, Xu X, Liu J, Huang Z (2013) Influence of cavity pressure on hydrodynamic deep drawing of aluminum alloy rectangular box with wide flange. Int J Mech Sci 77:217–226
Meng B, Wan M, Wu X, Yuan S, Xu X, Liu J (2014) Inner wrinkling control in hydrodynamic deep drawing of an irregular surface part using drawbeads. Chinese J Aeronaut 27:697–707
Zhu Y, Wan M, Zhou YK (2012) Investigation into influence of pre-forming depth on multi-stage hydrodynamic deep drawing of thin-wall cups with stepped geometries. Adv Mater Res 457-458:1219–1222
Shim H, Yang DY (2005) A simple method to determine pressure curve for sheet hydro-forming and experimental verification. J Mater Proc Tech 169:134–142
Yaghoobi A, Baseri H, Bakhshi-Jooybari M, Gorji A (2013) Pressure path optimization of hydrodynamic deep drawing of cylindrical-conical parts. Int J Precis Eng Man 14:2095–2100
Khandeparkar T, Liewald M (2008) Hydromechanical deep drawing of cups with stepped geometries. J Mater Proc Tech 202:246–254
Jalil A, Hoseinpour GM, Sheikhi MM, Seyedkashi SMH (2016) Hydrodynamic deep drawing of double layered conical cups. T Nonferr Metal Soc 26:237–247
Bagherzadeh S, Mollaei-Dariani B, Malekzadeh K (2012) Theoretical study on hydro-mechanical deep drawing process of bimetallic sheets and experimental observations. J Mater Proc Tech 212:1840–1849
Assempour A, Taghipour E (2011) The effect of normal stress on hydro-mechanical deep drawing process. Int J Mech Sci 53:407–416
Zhang SH (1999) Developments in hydroforming. J Mater Proc Tech 91:236–244
Zampaloni M, Abedrabbo N, Pourboghrat F (2003) Experimental and numerical study of stamp hydroforming of sheet metals. Int J Mech Sci 45:1815–1848
E DX, Mizuno T, Li Z (2008) Stress analysis of rectangular cup drawing. J Mater Proc Tech 205:469–476
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, C., Wan, M., Meng, B. et al. Process window calculation and pressure locus optimization in hydroforming of conical box with double concave cavities. Int J Adv Manuf Technol 91, 847–858 (2017). https://doi.org/10.1007/s00170-016-9814-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-9814-7