Abstract
Silicon carbide (SiC) is a competitive candidate material for building the space-based reflecting mirrors. However, SiC is also a typical difficult-to-machine material due to its extreme hardness. When SiC workpiece is machined by grinding, the wheel wears rapidly which leads to a deterioration of surface form accuracy. Grinding efficiency also becomes extremely low due to the frequent truing and dressing of grinding wheels. To achieve high-performance grinding process capable of producing accurate surface at high grinding efficiency, an ultrasonic vibration-assisted fix-point grinding technology was developed in this study. Wheel wear observation indicated that the wheel needs not to be dressed during the whole grinding cycle. Moreover, a laser tracker was used to achieve an on-machine measurement of the surface form error. A CNC tool microset was adopted to evaluate the wheel wear amount. On the basis of the above two results, surface form error could be predicted before grinding, and thus, an in-process compensation of surface form error was carried out. Using the above-mentioned grinding strategies, a SiC mirror blank with an aperture diameter of 2 m was successfully ground to a form accuracy of 18 μm in peak-to-valley (PV). Therefore, this work provides an efficient and economical solution for grinding the large-scale SiC aspherical surfaces.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Lallo M (2012) Experience with the Hubble Space Telescope: 20 years of an archetype. Opt Eng 51(1):011011
Shore P, Cunningham C, Debra D, Evans C, Hough J, Gilmozzi R, Kunzmann H, Morantz P, Tonnellier X (2010) Precision engineering for astronomy and gravity science. CIRP Ann – Manuf Techn 59(2):694–716
Hull T, Westerhoff T (2014) Lightweight ZERODUR mirror blanks: recent advances supporting faster, cheaper, and better spaceborne optical telescope assemblies. Proc SPIE 9241
Tonnellier X, Morantz P, Shore P, Baldwin A, Evans R, Walker D (2007) Subsurface damage in precision ground ULE and Zerodur surfaces. Opt Express 15(19):12197–12205
Bougoin M, Deny P (2004) The SiC technology is ready for the next generation of extremely large telescopes. Proc SPIE 5494:9–18
Zhang XJ, Zhang ZY, Zheng LG (2005) Manufacturing and testing SiC aspherical mirrors in space telescopes. Proc SPIE 6024:1–5
Ealey M, Weaver G (1996) Developmental history and trends for reaction bonded silicon carbide mirrors. Proc SPIE 2587:66–72
Kitahara H, Noda Y, Yoshida F, Nakashima H, Shinohara N, Abe H (2001) Mechanical behavior of single crystalline and polycrystalline silicon carbides evaluated by Vickers indentation. J Ceram Soc Jpn 109:602–606
Wilson R (2002) Reflecting telescope optics II: manufacture, testing, alignment, Modern Techniques. Springer-Verlag, New York, LLC
Cheng H, Feng Z, Lei S, Wang Y (2005) Magnetorheological finishing of SiC aspheric mirrors. Mater Manuf Process 20(6):917–931
Weiser M (2009) Ion beam figuring for lithography optics. Nucl Instr Meth Phys Res B 269(8–9):1390–1393
Yin L, Vancoille E, Lee L, Huang H, Ramesh K, Liu X (2004) High-quality grinding of polycrystalline silicon carbide spherical surfaces. Wear 256:197–207
Comley P, Morantz P, Shore P, Tonnellier X (2011) Grinding metre scale mirror segments for the E-ELT ground based telescope. CIRP Ann – Manuf Techn 60:379–382
Tonnellier X (2009) Precision grinding for rapid manufacturing of large optics. Cranfield University, England
Zhang T, Zhang ZQ, Zhang JX, Jiang DL, Lin QL (2007) Preparation of SiC ceramics by aqueous gelcasting and pressureless sintering. Mater Sci Eng A 443(1–2):257–261
Suyama S, Kameda T, Itoh Y (2003) Development of high-strength reaction-sintered silicon carbide. Diamond Relat Mater 121201:1204
Kuriyagawa T, Zahmaty M, Syoji K (1996) A new grinding method for aspheric ceramic mirrors. J Mater Process Technol 62(4):387–392
Chen FJ, Yin SH, Ohmori H, Yu J (2012) Form error compensation in single-point inclined axis nanogrinding for small aspheric insert. Int J Adv Manuf Tech 65(1–4):433–441
Zhang ZY, Zheng LG (2013) Grinding strategies for machining the off-axis aspherical reaction-bonded SiC mirror blank. Chin Opt Lett 12(1):S12202–S12206
Su P, Oh C, Zhao CY, Burge J (2012) Optical testing for meter size aspheric optics. Proc SPIE 8466:84660S
Chen FJ, Yin SH, Huang H, Ohmori H, Wang Y, Fan YF, Zhu YJ (2010) Profile error compensation in ultra-precision grinding of aspheric surfaces with on-machine measurement. Int J Adv Manuf Tech 50:480–486
Li DD, Xu MM, Wei CJ, Hu DJ, Xu LM (2011) Error analysis and in-process compensation on cup wheel grinding of hard sphere. Int J Adv Manuf Tech 515:43–548
Rahman M, Saleh T, Lim H, Son S, Rahman M (2008) Development of an on-machine profile measurement system in ELID grinding for machining aspheric surface with software compensation. Int J Adv Manuf Tech 48:887–895
Nakai M, Aguiar P, Jr H, Bianchi E, Spatti D, Addona D (2015) Evaluation of neural models applied to the estimation of tool wear in the grinding of advanced ceramics. Expert Syst Appl 42:7026–7035
Li SY, Wang Z, Wu YL (2008) Relationship between subsurface damage and surface roughness of optical materials in grinding and lapping processes. J Mater Process Technol 205:34–41
Lambropoulos JC (1998) Micromechanics of material-removal mechanisms from brittle surfaces. LLE Review 74:131–138
Esmaeilzare A, Rahimi A, Rezaei SM (2014) Investigation of subsurface damages and surface roughness in grinding process of Zerodur glass-ceramic. Appl Surf Sci 313:67–75
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, Z., Yang, X., Zheng, L. et al. High-performance grinding of a 2-m scale silicon carbide mirror blank for the space-based telescope. Int J Adv Manuf Technol 89, 463–473 (2017). https://doi.org/10.1007/s00170-016-9107-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-9107-1