Abstract
Nowadays, the generation mechanism of the machined residual stress is still an uncompleted explored scientific problems, the major focus of the recent research is on the qualitative analysis on the formation resources (cutting force and temperature). In this article, a new model is built to quantitatively analyze the influence of the cutting force and temperature on the residual stress generation. Experiments and simulations are conducted to compare the cutting forces, temperature, and residual stress. Then, the specific correlation coefficients between the cutting force and temperature on the residual stress formation are calculated by the proposed model. According to the results, it can be concluded that the cutting force plays a leading role when compared with the influence of temperature on the generated machined residual stress. Moreover, the tangential residual stress is mainly induced by the tangential force and temperature. The radial residual stress is mainly determined by the radial force, and the effect of the temperature on the radial direction is less than the tangential direction. The proposed approach can better help to understand the residual stress generation and provide more evidence to control the distribution of machined residual stress.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Soroush M, Saeid A, Ehasan S, Hamdollah EC (2015) Effect of machining-induced residual stress on the distortion of thin-walled parts. Int J Adv Manuf Technol 76:597–608
Fre’de’ ric V, Jo¨el R, He’di HD et al. (2012) 3D modeling of residual stresses induced in finish turning of an AISI304L stainless steel. Int J Mach Tools Manuf: 77–90
Gozin MH, Aghaie-Khafri M (2012) 2D and 3D finite element analysis of crack growth under compressive residual stress field. Int J Solids Struct 49(23–24):3316–3322
Li JL, Jing LL, Chen M (2009) An FEM study on residual stresses induced by high-speed end-milling of hardened steel SKD11. J Mater Process Technol 209:4515–4520
Lazoglu I, Ulutan D, Alaca BE, Engin S, Kaftanoglu B (2008) An enhanced analytical model for residual stress prediction in machining. CIRP Ann - Manuf Technol 57:81–84
Ulutan D, Alaca BE, Lazoglu I (2007) Analytical modeling of residual stresses in machining. J Mater Process Technol 183:77–87
Saurabh A, Suhas SJ (2013) Analytical modelling of residual stresses in orthogonal machining of AISI4340 steel. J Manuf Process 15(1):167–179
Omar F, Ismail L, Mkaddem A, El Mansori M, Liang SY (2014) Analytical modeling of residual stress and the induced deflection of a milled thin plate. Int J Adv Manuf Technol 75(1):455–463
Robinson JS, Tanner DA, Truman CE, Wimpory RC (2011) Measurement and prediction of machining induced redistribution of residual stress in the aluminium alloy 7449. Exp Mech 51:981–993
Rossini NS, Dassisti M, Benyounis KY, Olabi AG (2012) Methods of measuring residual stresses in components. Mater Des 35:572–588
Jacobus K, Devor RE, Kapoor SG (2000) Machining-induced residual stress: experimentation and modeling. J Manuf Sci Eng 122(1):20–30
Wei Y, Wang XW (2007) Computer simulation and experimental study of machining deflection due to original residual stress of aerospace thin-walled parts. Int J Adv Manuf Technol 33:260–265
Outeiroa JC, Umbrello D, Saoubi RM (2006) Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316L steel. Int J Mach Tools Manuf 46:1786–1794
Liang SY, Su JC (2007) Residual stress modeling in orthogonal machining. CIRP Ann - Manuf Technol 56(1):65–68
Su JC, Young KA, Ma K, Srivatsa S, Morehouse JB, Liang SY (2013) Modeling of residual stresses in milling. Int J Adv Manuf Technol 65(5–8):717–733
Omar F, Shao YM, Ismail L, Liang SY (2014) Temperature effects on grinding residual stress. Proc CIRP 14:2–6
Kuang HF, Wu CF (1995) A residual stress model for the milling of aluminum alloy(2014-T6). J Mater Process Technol 51:87–105
Mohammadpour M, Razfar MR, Jalili Saffar R (2010) Numerical investigating the effect of machining parameters on residual stresses in orthogonal cutting. Simul Model Pract Th 18:378–389
Borja C, Virginia GN, Oscar G, Ana A, Carmen S (2011) Influences of turning parameters in surface residual stresses in AISI 4340 steel. Int J Adv Manuf Technol 53:911–919
Mohamed NA, Ng EG, Elbestawi MA (2007) Modelling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316L. Int J Mach Tools Manuf 47(2):401–411
Tang ZT, Liu ZQ, Pan YZ, Wan Y, Ai X (2009) The influence of tool flank wear on residual stresses induced by milling aluminum alloy. J Mater Process Technol 209(2):4502–4508
Lin ZC, Lai WL, Lin HY, Liu CR (1997) Residual stresses with different tool flank wear lengths in the ultra-precision machining of Ni-P alloys. J Mater Process Technol 65:116–126
Zong WJ, Li D, Cheng K, Sun T, Liang YC (2007) Finite element optimization of diamond tool geometry and cutting-process parameters based on surface residual stresses. Int J Adv Manuf Technol 32:666–674
Robinson JS, Tanner DA, Truman CE, Paradowska AM, Wimpory RC (2012) The influence of quench sensitivity on residual stresses in the aluminium alloys 7010 and 7075. Mater Charact 65:73–85
Ma Y, Feng PF, Zhang JF, Wu ZJ, Yu DW (2015) Energy criteria for machining-induced residual stresses in face milling and their relation with cutting power. Int J Adv Manuf Technol. doi:10.1007/s00170-015-7278-9
Outeiro JC, Dias AM, Lebrun JL, Astakhov VP (2002) Machining residual stresses in AISI 316L steel and their correlation with the cutting parameters. Mach Sci Technol 6(2):251–270
Ma Y, Yu DW, Feng PF (2014) FEM analysis of residual stress distribution and cutting forces in orthogonal cutting with different initial stresses. Mater Sci Forum 800–801:380–384
Jiang XH, Li BZ, Yang JG, Zuo XY, Li K (2013) An approach for analyzing and controlling residual stress generation during high-speed circular milling. Int J Adv Manuf Technol 66:1439–1448
Jiang XH, Li BZ, Yang JG, Zuo XY (2013) Effects of tool diameters on the residual stress and distortion induced by milling of thin-walled part. Int J Adv Manuf Technol 68(1–4):175–186
Li BZ, Jiang XH, Yang JG, Liang SY (2015) Effects of depth of cut on the distortion and redistribution of residual stress during the milling of thin-walled part. J Mater Pro Technol 216:223–233
Kuruppu MD, Williams JF, Bridgford N, Jones R, Stouffer DC (1992) Constitutive modelling of the elastic–plastic behaviour of 7050-T7451 aluminium alloy. J Strain Anal Eng Des 27:85–92
Third Wave Systems (2010) I., AdvantEdge v5.6-014 Machining simulation software. Minneapolis, MN
Jing S, Liu CR (2004) The influence of material models on finite element simulation of machining. J Manuf Sci Eng 126:849–857
Halil B, Kılıc SE, Tekkaya AE (2004) A comparison of orthogonal cutting data from experiments with three different finite element models. Int J Mach Tools Manuf 44:933–944
Marusich TD, Ortiz M (1995) Modelling and simulation of high-speed machining. In J Num Meth in Eng 38(21):3675–3694
Marusich TD, Askari E (2001) Modeling residual stress and workpiece quality in machined surfaces. Third Wave Systems, Inc, Minneapolis
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jiang, X., Li, B., Wang, L. et al. An approach to evaluate the effect of cutting force and temperature on the residual stress generation during milling. Int J Adv Manuf Technol 87, 2305–2317 (2016). https://doi.org/10.1007/s00170-016-8605-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-8605-5