Abstract
Arcing-wire gas tungsten arc welding is an innovative process developed as a variant of gas tungsten arc welding to reinforce the deposition rate by utilizing bypass arc energy. After establishing an experimental platform, the experiments were conducted to study the arc characteristics, interaction of the main and bypass arcs, and metal transfer behavior. Magnetic arc blow, location of the bypass arc root, and shielding gas flow were found to cause arc deflection and an invisible obstacle between the arcs in arcing-wire gas tungsten arc welding. The bypass arc voltage should be controlled carefully to maintain the stability of the welding process. Globular transfer, short-circuiting transfer, and continuous bridging transfer could be obtained, which were determined by wire feed speed (the melting current) and the distance from the wire tip to the workpiece as well as the welding direction.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Moniz BJ, Miller RT (2010) Welding skill. American Technical Publisher
O’Brion RL (1991) Welding handbook. Welding Process. American Welding Society, Miami
Alexander CK, Sadiku MNO (2000) Fundamentals of electric circuits. McGraw Hill
Chen JS, Lu Y, Li XR, Zhang YM (2012) Gas tungsten arc welding using an arcing wire. Weld J 91:261s–269s
Lv SX, Tian XB, Wang HT, Yang SQ (2007) Arcing heating hot wire assisted arc welding technology for low resistance welding wire. Sci Technol Weld Join 12:431–435
Lu Y, Chen SJ, Shi Y, Li XR, Chen JS, Kvidahl L, Zhang YM (2014) Double-electrode arc welding process: principle, variants, control and developments. J Manuf Process 16:93–108
Kah P, Suoranta R, Martikainen J (2013) Advanced gas metal arc welding processes. Int J Adv Manuf Technol 67:655–674
Doodman Tipi AR, Hosseini sani SK, Pariz N (2015) Improving the dynamic metal transfer model of gas metal arc welding (GMAW) process. Int J Adv Manuf Technol 76:657–668
Li KH, Zhang YM (2010) Interval model control of consumable double-electrode gas metal arc welding process. IEEE Trans Autom Sci Eng 7:826–839
Li KH, Zhang YM (2007) Metal transfer in double-electrode gas metal arc welding. J Manuf Sci Eng 129:991–999
Li KH, Zhang YM, Xu P, Yang FQ (2008) High-strength steel welding with consumable double-electrode gas metal arc welding. Weld J 87:57–64
Zhang W, Hua XM, Liao W, Li F, Wang M (2014) Behavior of the plasma characteristic and droplet transfer in CO2 laser–GMAW-P hybrid welding. Int J Adv Manuf Technol 72:935–942
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, H., Hu, S., Wang, Z. et al. Arc characteristics and metal transfer modes in arcing-wire gas tungsten arc welding. Int J Adv Manuf Technol 86, 925–933 (2016). https://doi.org/10.1007/s00170-015-8228-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-8228-2