Abstract
The objective of the current work was to investigate the influence of tool path and micro-milling conditions on wear, surface roughness, and forces when micro-milling Ti6Al4V titanium material. The performances of raster (zigzag) and single-direction raster (zig) tool paths were evaluated. The micro-milling experiments were carried out by employing high-speed spindle attachment connected to main spindle of standard machine tool under various tool paths. The experimental studies consisted of two stages. In the first stage, the effect of spindle speed by employing high-speed spindle attachment was examined under various tool paths at low and high feed rates. In the second stage, the effect of feed rate on machining performance was investigated under various tool paths. Based on this study, the optimum cutting conditions could be determined when using high-speed spindle attachment under various tool paths.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Kuram E, Ozcelik B (2013) Multi-objective optimization using Taguchi based grey relational analysis for micro-milling of Al 7075 material with ball nose end mill. Measurement 46:1849–1864
Uriarte L, Herrero A, Zatarain M, Santiso G, Lopez de Lacalle LN, Lamikiz A, Albizuri J (2007) Error budget and stiffness chain assessment in a micromilling machine equipped with tools less than 0.3 mm in diameter. Precis Eng 31:1–12
Kuram E, Ozcelik B (2014) Micro-milling performance of AISI 304 stainless steel using Taguchi method and fuzzy logic modelling. J Intell Manuf. doi:10.1007/s10845-014-0916-5
Kuram E, Ozcelik B (2015) Optimization of machining parameters during micro-milling of Ti6Al4V titanium alloy and Inconel 718 materials using Taguchi method. Proc Inst Mech Eng B J Eng Manuf. doi:10.1177/0954405415572662
Monroy-Vazquez KP, Attanasio A, Ceretti E, Siller HR, Hendrichs-Troeglen NJ, Giardini C (2013) Evaluation of superficial and dimensional quality features in metallic micro-channels manufactured by micro-end-milling. Materials 6:1434–1451
Thepsonthi T, Ozel T (2013) Experimental and finite element simulation based investigations on micro-milling Ti-6Al-4V titanium alloy: Effects of cBN coating on tool wear. J Mater Process Technol 213:532–542
Toh CK (2003) Tool life and tool wear during high-speed rough milling using alternative cutter path strategies. Proc Inst Mech Eng B J Eng Manuf 217:1295–1304
Toh CK (2003) Surface topography analysis when high-speed rough milling hardened steel. Mater Manuf Process 18:849–862
Toh CK (2006) Cutter path strategies in high speed rough milling of hardened steel. Mater Des 27:107–114
Li HZ, Zeng H, Chen XQ (2006) An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts. J Mater Process Technol 180:296–304
Li P (2009) Micromilling of hardened tool steels. Delft University of Technology, Ph.D thesis
Dimov S, Pham DT, Ivanov A, Popov K, Fansen K (2004) Micromilling strategies: optimization issues. Proc Inst Mech Eng B J Eng Manuf 218:731–736
Cardoso P, Davim JP (2010) Optimization of surface roughness in micromilling. Mater Manuf Process 25:1115–1119
Biermann D, Kahleyss F, Surmann T (2009) Micromilling of NiTi shape-memory alloys with ball nose cutters. Mater Manuf Process 24:1266–1273
Zhou L, Wang CY, Qin Z (2009) Tool wear characteristic in high-speed milling of graphite using a coated carbide micro endmill. Proc Inst Mech Eng B J Eng Manuf 223:267–277
Nouari M, Makich H (2013) Experimental investigation on the effect of the material microstructure on tool wear when machining hard titanium alloys: Ti-6Al-4V and Ti-555. Int J Refract Met Hard Mater 41:259–269
Bian R, Ferraris E, He N, Reynaerts D (2014) Process investigation on meso-scale hard milling of ZrO2 by diamond coated tools. Precis Eng 38:82–91
Saedon JB (2011) Micromilling of hardened (62 HRC) AISI D2 cold work tool steel. University of Birmingham, Ph.D. Thesis
Saedon JB, Soo SL, Aspinwall DK, Barnacle A (2012) Micro-milling of hardened AISI D2 tool steel. Adv Mater Res 445:62–67
Toh CK (2004) A study of the effects of cutter path strategies and orientations in milling. J Mater Process Technol 152:346–356
Tian X, Zhao J, Zhao J, Gong Z, Dong Y (2013) Effect of cutting speed on cutting forces and wear mechanisms in high-speed face milling of Inconel 718 with Sialonceramic tools. Int J Adv Manuf Technol 69:2669–2678
Pathak BN, Sahoo KL, Mishra M (2013) Effect of machining parameters on cutting forces and surface roughness in Al-(1-2) Fe-1V-1Si alloys. Mater Manuf Process 28:463–469
Shaw MC (1997) Metal cutting principles. Clarendon, Oxford
Arizmendi M, Campa FJ, Fernandez J, Lopez de Lacalle LN, Gil A, Bilbao E, Veiga F, Lamikiz A (2009) Model for surface topography prediction in peripheral milling considering tool vibration. CIRP Ann Manuf Technol 58:93–96
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kuram, E., Ozcelik, B. Effects of tool paths and machining parameters on the performance in micro-milling of Ti6Al4V titanium with high-speed spindle attachment. Int J Adv Manuf Technol 84, 691–703 (2016). https://doi.org/10.1007/s00170-015-7741-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7741-7