Abstract
Laser machining is commonly used for fabrication of medical devices with microscale features, including vascular stents, drug delivery devices, and scaffolds for tissue engineering with controlled pore size and porosity. The process can also be used to produce structured scaffolds for controlling cell growth, orientation, and location. Moreover, lasers may be used to fabricate complex channel nets in which cells are subsequently seeded or to pattern channels for microfluidic devices. Traditionally, these micro devices were fabricated using silicon substrates, but recently the use of titanium allowed to produce more robust devices at a reasonable cost. In particular, the high quality surfaces that can be obtained with laser machining reduce the liquid flow turbulence and avoid micro cavities formation, critical for bacteria proliferation. The present research reports the results of an investigation on the process capability of laser ablation to produce micro pockets fabricated on titanium sheet (0.5 mm thick). A first experimental campaign was designed for identifying a set of laser ablation cycles able to realize the micro pockets by changing the process parameters as scanning speed, laser power, q-switch frequency, loop number, and duty cycle. Moreover, a process optimization was executed in order to produce the pockets with a highly flat surface. The results were acquired by a confocal laser scanning microscope (CLSM) to obtain high-resolution images with depth selectivity and were analyzed with statistic methods for the identification of the best parameter configuration.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
De Chiffre L, Kunzmann H, Peggs GN, Lucca DA (2003) Surfaces in precision engineering, microengineering and nanotechnology. CIRP Ann 52(2):561–577. doi:10.1016/S0007-8506(07)60204-2
Ramsden JJ, Allen DM, Stephenson DJ, Alcock JR, Peggs GN, Fuller G, Goch G (2007) The design and manufacture of biomedical surfaces. CIRP Ann 56(2):687–711. doi:10.1016/j.cirp.2007.10.001
Masuzawa T (2000) The state of art of micromachining. CIRP Ann 49(2):473–488. doi:10.1016/S0007-8506(07)63451-9
Li L, Hong M, Schmidt M, Zhong M, Malshe A, Huis in’tVeld B, Kovalenko V (2011) Laser nano-manufacturing—state of the art and challenges. CIRP Ann 60:735–755. doi:10.1016/j.cirp.2011.05.005
Meijer J, Du K, Gillner A, Hoffmann D, Kovalenko VS, Masuzawa T, Ostendorf A, Poprawe R, Schulz W (2002) Laser machining by short and ultrashort pulses, state of the art and new opportunities in the age of the photons. CIRP Ann 51(2):531–550. doi:10.1016/S0007-8506(07)61699-0
Parker ER, Hirst LS, Safinya CR, MacDonald NC (2005) Bulk titanium microfluidic networks for protein self-assembly studies. Proceedings of MicroTAS 2005 Conference: 9th International Conference on Miniaturized Systems for Chemistry and Life Sciences 1: 945–947. http://www.engineering.ucsb.edu/∼memsucsb/Research/publications/parker_microtas05.pdf. Accessed 5 May 2015
Meinhart C, MacDonald N, Mezic I, Saffinya C (2005) Titanium-based biomolecular manipulation tools, NSF Nanoscale Science and Engineering Grantees Conference. http://www.nseresearch.org/2005/NewFiles/ov16_0404444UCSB_Meinhart.pdf. Accessed 5 May 2015
http://micropat.ch/application/titanium-microfluidic. Accessed 5 May 2015
Campanelli SL, Ludovico AD, Bonserio C, Cavalluzzi P, Cinquepalmi M (2007) Experimental analysis of the laser milling process parameters. J Mater Process Technol 191:220–223. doi:10.1016/j.jmatprotec.2007.03.005
Garnov SV, Konov VI, Kononenko T, Pashinin VP, Sinyavsky MN (2004) Microsecond laser material processing at 1.06 nm. Laser Physics 14:910–915. http://www.maik.ru/full/lasphys_archive/04/6/lasphys6_04p910full.pdf. Accessed 5 May 2015
Liu X, Chu PK, Ding C (2004) Surface modification of titanium, titanium alloys, and related materials for biomedical applications. Mater Sci Eng 47:49–121. doi:10.1016/j.mser.2004.11.001
Chen K, Yao YL (2000) Process optimization in pulsed laser micromachining with applications in medical device manufacturing. Int J Adv Manuf Technol 16:243–249. doi:10.1007/s001700050152
Teixidor D, Thepsonthi T, Ciurana J, Özel T (2012) Nanosecond pulsed laser micromachining of PMMA-based microfluidic channels. J Manuf Process 14:435–442. doi:10.1016/j.jmapro.2012.09.001
Fasasi AY, Mwenifumbo S, Rahbar N, Chen J, Li M, Beye AC, Arnold CB, Soboyejo WO (2009) Nano-second UV laser processed micro-grooves on Ti6Al4V for biomedical applications. Mater Sci Eng C 29:5–13. doi:10.1016/j.msec.2008.05.002
Zhao J, Huettner B, Menschig A (2001) Microablation with ultrashort laser pulses. Opt Laser Technol 33:487–491. doi:10.1016/S0030-3992(01)00066-4
Gittard SD, Narayan RJ (2010) Laser direct writing of micro- and nano-scale medical devices. Expert Rev Med Devices 7(3):343–356. doi:10.1586/erd.10.14
Yasa E, Kruth JP (2010) Investigation of laser and process parameters for selective laser erosion. Precis Eng 34:101–112. doi:10.1016/j.precisioneng.2009.04.001
Chen TC, Darling RB (2008) Laser micromachining of the materials using in microfluidics by high precision pulsed near and mid-ultraviolet Nd:YAG lasers. J Mater Process Technol 198:248–253. doi:10.1016/j.jmatprotec.2007.06.083
Giorleo L., Ceretti E., Giardini C. (2014) Ti surface laser polishing: effect of laser path and assist gas, 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME ‘14, Capri, Italy, July, 23–25.
Tang G, Abdolvand A (2013) Structuring of titanium using a nanosecond-pulsed Nd:YVO4 laser at 1064 nm. Int J Adv Manuf Technol 66:1769–1775. doi:10.1007/s00170-012-4456-x
Zheng B, Jiang G, Wang W, Wang K, Mei X (2014) Ablation experiment and threshold calculation of titanium alloy irradiated by ultra-fast pulse laser. AIP Adv 4:1–9. doi:10.1063/1.4867088
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Giorleo, L., Ceretti, E. & Giardini, C. Optimization of laser micromachining process for biomedical device fabrication. Int J Adv Manuf Technol 82, 901–907 (2016). https://doi.org/10.1007/s00170-015-7450-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7450-2