Abstract
This study investigated the effects of process parameters on acceleration amplitude in the drilling of AISI D2 and AISI D3 cold work tool steels using HSS twist drills of two different lengths. Workpiece hardness, drill length/tool overhang, cutting speed, feed rate, and number of holes drilled were chosen as the process parameters. In the tests made by using the full factorial (FF) design technique, the values of induced machining vibrations occurring on the workpiece during drilling were specified as the acceleration amplitude. Measurement results were evaluated by linear regression analysis, and a second-order equation was developed for the prediction of the acceleration amplitude. The correlation coefficient of the predictive equation at a 95 % confidence level was calculated as R 2 = 0.703. The main and interaction effects of the process parameters on the acceleration amplitude were evaluated, and the percentage contributions of the process parameters to the acceleration amplitude were determined by variance analysis. In addition, scanning electron microscope (SEM) and optical microscope images of the drill wear were taken, and the wear characteristics and acceleration amplitude were correlated. The most effective parameters on acceleration amplitude were determined as the number of holes drilled, workpiece hardness, cutting speed, and feed rate. No significant effect of drill length/tool overhang was observed. With increasing cutting speed, number of holes drilled and the drill length/tool overhang, the acceleration amplitude values increased, although they decreased with increasing workpiece hardness.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Kaplan Y, Okay Ş, Motorcu AR, Nalbant M (2014) Investigation of the effects of machining parameters on the thrust force and cutting torque in the drilling of AISI D2 and AISI D3 cold work tool steels. Indian J Eng Mater S 21:128–138
Şahin Y (2003) İmal Usulleri. Gazi Kitabevi, Ankara
Abuthakeer SS, Mohanram PV, Mohan Kumar G (2011) Prediction and control of cutting tool vibration in CNC lathe with Anova and ANN. I. J Lean Think 2:1–23
Izelu CO, Eze SC, Oreko BU, Edward BA, Garba DK (2013) Response surface methodology in the study of induced machining vibration and work surface roughness in the turning of 41Cr4 alloy steel. Int J Emerg Technol Adv Eng 3:13–17
Khalili K, Danesh M (2013) Investigation of overhang effect on cutting tool vibration for tool condition monitoring. J Meas Eng 1:171–177
Stephenson AD, Agapiou JS (2006) Metal cutting theory and practice. Taylor and Francis Group, New York
Kaplan Y (2010) Effects of different parameters on cutting force, torque, vibration, surface roughness, tool wear and exit burrs in drilling. Dissertation, Gazi University
Abuthakeer SS, Mohanram PV, Mohankumar G (2011) The effect of spindle vibration on surface roughness of workspiece in dry turning using ANN. I. J Lean Think 2:42–58
Ay M, Turhan A (2011) Determination and optimization of the effect of cutting parameters and workpiece length on the geometric tolerances and surface roughness in turning operation. Int J Phys Sci 6:1074–1084. doi:10.5897/IJPS11.130
Dilipak H, Yılmaz V (2012) Investigation of vibrations and statistical analysis in milling of AISI 1050 steel with carbide tools. J Fac Eng Archit Gazi Univ 27:285–294
Vinay BG, Janakinandan N, Suresh BG (2013) The impact of cutting conditions on cutting forces and chatter length for steel and aluminum. Int J Eng Adv Technol 2:919–924
Aleksandrovich RV, Siamak G (2014) The effect of tool construction and cutting parameters on surface roughness and vibration in turning of AISI 1045 steel using Taguchi method. Mod Mech Eng 4:8–18. doi:10.4236/mme.2014.41002
Fang N, Pai PS, Mosquea S (2010) The effect of built-up edge on the cutting vibrations in machining 2024-T351 aluminum alloy. Int J Adv Manuf Technol 49:63–71. doi:10.1007/s00170-009-2394-z
Sanjay C (2007) Drill wear monitoring by vibration signature analysis. J Inst Eng Malaysia 68:22–26
Rahim EA, Kamdani K, Sharif S (2008) Performance evaluation of uncoated carbide tool in high speed drilling of Ti6Al4V. J Adv Mech Des Syst 2:522–531. doi:10.1299/jamdsm.2.522
Kurt M, Kaynak Y, Bagci E (2008) Evaluation of drilled hole quality in Al 2024 alloy. Int J Adv Manuf Technol 37:1051–1060. doi:10.1007/s00170-007-1049-1
Panda SS, Chakraborty D, Pal SK (2008) Flank wear prediction in drilling using back propagation neural network and radial basis function network. Appl Soft Comput 8:858–871. doi:10.1016/j.asoc.2007.07.003
Ramkumar J, Malhotra SK, Krishnamurthy R (2004) Effect of workpiece vibration on drilling of GFRP laminates. J Mater Process Technol 152:329–332. doi:10.1016/S0924-0136(03)00622-8
Zhang JZ, Chen JC (2009) Surface roughness optimization in a drilling operation using the Taguchi design method. Mater Manuf Process 24:459–467. doi:10.1080/10426910802714399
Ahmadi K, Altintas Y (2013) Stability of lateral, torsional and axial vibrations in drilling. Int J Mach Tool Manuf 68:63–74. doi:10.1016/j.ijmachtools.2013.01.006
Messaoud A, Weihs C, Hering F (2008) Detection of chatter vibration in a drilling process using multivariate control charts. Comput Stat Data Anal 52:3208–3219. doi:10.1016/j.csda.2007.09.029
Imani BM, Moosavi SG (2009) Time domain simulation of torsional-axial and lateral vibration in drilling operation. Proceeding of International Conference on Applications and Design in Mechanical Engineering (ICADME) 11-13 October, Batu Ferringhi Penang, Malaysia, 1-7
Bayly PV, Metzler SA, Schaut AJ, Young KA (2000) Theory of torsional chatter in twist drills: model, stability analysis and composition to test. J Manuf Sci Eng 123:552–561. doi:10.1115/1.1381399
Mehrabadi IM, Nouri M, Madoliat R (2009) Investigating chatter vibration in deep drilling, including process damping and the gyroscopic effect. Int J Mach Tool Manuf 49:939–946. doi:10.1016/j.ijmachtools.2009.06.009
Stone E, Askari A (2002) Nonlinear models of chatter in drilling processes. Dyn Syst 17:65–85. doi:10.1080/14689360110105788
Huang BW (2003) Dynamic characteristics of a drill in the drilling process. P I Mech Eng B-J Eng 217:161–167. doi:10.1243/095440503321148803
Kaplan Y, Nalbant M, Gökkaya H (2011) The experimental investigation of the effect of machining parameters on burr formation in drilling of AISI D2 and AISI D3 cold work steels. Karaelmas Sci Eng J 1:37–46. doi:10.7212%2Fzkufbd.v1i1.11
Akman G, Özkan C (2011) Solving adhesion problem in metal sheet manufacturing with design of experiments. Dogus Univ J 12:187–199
Breyfoglef W (2003) Implementing six sigma: smarter solutions using statistical methods. John Wiley & Sons, New York
Lazic´ ZR (2004) Design of experiments in chemical engineering: a practical guide. Wiley-VCH, Weinheim
Amin AKMN, Imran M, Arif M (2002) Influence of cutting parameters on chatter and tool wear during end milling of stainless steel conducted on VMC. IIUM Eng J 3:1–15
Ertunç HM, Sevim İ (2001) Studies on tool wear condition monitoring. Pamukkale Univ J Eng Sci 7:55–62
Okay S, Kaplan Y, Motorcu AR, Nalbant M (2013) Evaluation of cutting tool wear characteristics and removed chip volumes in drilling of AISI D2 and AISI D3 cold work tool steels. 7th International Advanced Technologies Symposium (IATS’13) 30 October-1 November, Istanbul, Turkey
Orhan S, Er AO, Camuşcu N, Aslan A (2007) Tool wear evaluation by vibration analysis during end milling of AISI D3 cold work tool steel with 35 HRC hardness. NDT&E Int 40:121–126. doi:10.1016/j.ndteint.2006.09.006
Kayhan M, Budak E (2009) An experimental investigation of chatter effects on tool life. P I Mech Eng B-J Eng 223:1455–1463. doi:10.1243/09544054JEM1506
Durairaj M, Sudharsun D, Swamynathan N (2013) Analysis of process parameters in wire EDM with stainless steel using single objective Taguchi method and multi objective grey relational grade. Proc Eng 64:868–877. doi:10.1016/j.proeng.2013.09.163
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kaplan, Y., Motorcu, A.R., Nalbant, M. et al. The effects of process parameters on acceleration amplitude in the drilling of cold work tool steels. Int J Adv Manuf Technol 80, 1387–1401 (2015). https://doi.org/10.1007/s00170-015-7097-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7097-z