Abstract
The electric powertrain system consisting of electric motor (EM) and multi-stages planetary gearbox is a classical solution for automatic driving, both the driving capacity of EM and the mechanical features of gearbox should be systematically studied. In this paper, an electromechanical coupled modelling strategy was proposed using lumped method. Firstly, the driving model of three-phases asynchronous EM was built under rotor flux oriented control. Subsequently, the force transmissions between all coupled elements are investigated by analyzing the rotational and translational dynamics of planetary gear train, the radial bearing vibration characters of different gears under meshing force are also studied as typical spring damping mass system, and the time-varying meshing stiffness and nonlinear backlash between every meshing pairs are considered. Finally, the dynamic features of the gear train are comparatively studied with different gear teeth number configuration to eliminate the system vibration. The simulation results show that dynamic characteristics of this powertrain system have the frequency features of carrier revolution and the meshing harmonics, and odd teeth configuration is preferred to compress the working rotational vibration mode.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Liu, T., Gong, G.F., Yang, H.Y., et al.: Design and simulation of electro-hydraulic hybrid driving system for TBM cutterhead. In: IEEE/ASME MESA, Auckland, New Zealand, pp. 1–6 (2016)
Fan, B., Yang, Z.X., Wang, X.B., et al.: Model reference adaptive vector control for induction motor without speed sensor. Adv. Mech. Eng. 9(1), 1–14 (2017)
Sun, W., Ding, X., Wei, J., et al.: Hierarchical modeling method and dynamic characteristics of cutter head driving system in tunneling boring machine. Tunn. Undergr. Space Technol. 52, 99–110 (2016)
Liu, T., Gong, G., Yang, H., Chen, Y., Zhou, X.: Dynamic characteristics of the over-actuated cutterhead driving system in tunnel machine. Proc. IMechE, Part K: J. Multibody Dyn. 233(1), 111–124 (2019)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Science Press
About this paper
Cite this paper
Liu, T., Chen, C., Huang, H. (2020). Dynamic Characteristics Study of a Typical Electric Powertrain System. In: Duan, B., Umeda, K., Hwang, W. (eds) Proceedings of the Seventh Asia International Symposium on Mechatronics. Lecture Notes in Electrical Engineering, vol 588. Springer, Singapore. https://doi.org/10.1007/978-981-32-9437-0_20
Download citation
DOI: https://doi.org/10.1007/978-981-32-9437-0_20
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-32-9436-3
Online ISBN: 978-981-32-9437-0
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)