Abstract
The search for eco-friendly and renewable resources endowed with high stability and low toxicity has directed researchers around the globe to focus their attention on biomaterials, namely, biopolymers, which reduce the pollution caused by the rise in synthetic material-mediated pollution. As investment and research into biopolymers increases, several conventional material utilities are reduced in various optoelectrical, biological, and technological applications. Biopolymers in conjunction with nanotechnology have opened up novel and extremely useful arenas for their applications, namely, in the biomedical, energy sector, etc. This chapter is envisioned to outline the significant status of biopolymers as a promising engineering material employed in various fields. In addition, future challenges and perspectives are also discussed in detail.
Similar content being viewed by others
References
J. Aggarwal, S. Sharma, H. Kamyab, A. Kumar, The Realm of Biopolymers and Their Usage: An Overview and Erosion (ICSE-5), November 7–10, 2010, San Francisco, USA (American, Reston, 2020)
M.F. Ahlinhan, M. Achmus, Experimental investigation of critical hydraulic gradients for unstable soils, in Proceedings 5th International Conference on Scour and Erosion (ICSE-5), eds. by S. E. Burns, S. K. Bhatia, C. M. C. Avila, B. E. Hunt, (Reston, Va.: American Society of Civil Engineers, San Francisco, USA, 2010), pp. 599–608
M. Anker, M. Stading, A.M. Hermansson, Effects of pH and the gel state on the mechanical properties, moisture contents, and glass transition temperatures of whey protein films. J. Agric. Food Chem. 47(5), 1878–1886 (1999). https://doi.org/10.1021/jf981115d
F. Ashby, Materials and Sustainable Development, 1st edn. (Butterworth-Heinemann, Elsevier, Oxford, 2015)
R. Augustine, R. Rajendran, U. Cvelbar, M. Mozetič, A. George, Biopolymers for health, food, and cosmetic applications, in Handbook of Biopolymer-Based Materials, (2013). https://doi.org/10.1002/9783527652457.ch27
R.P. Babu, K. O’Connor, R. Seeram, Current progress on bio-based polymers and their future trends. Prog. Biomater. 2(1), 8 (2013). https://doi.org/10.1186/2194-0517-2-8
C. Baillie (ed.), Green Composites. Polymer Composites and the Environment (CRC Press, Boca Raton, 2004)
V.M. Balasubramaniam, M.S. Chinnan, Role of packaging in quality preservation of frozen foods, in Quality in Frozen Food, ed. by M. C. Erickson, Y. C. Hung, (Chapman & Hall, New York, 1997), pp. 296–309. Chapter 15
C. Bastioli (ed.), Handbook of Biodegradable Polymers (Smithers Rapra Publishing, Shawbury, 2005)
L. Bedian, A.M. Villalba-Rodríguez, G. Hernández-Vargas, R. Parra-Saldivar, H.M.N. Iqbal, Bio-based materials with novel characteristics for tissue engineering applications – A review. Int. J. Biol. Macromol. 98, 837–846 (2017). https://doi.org/10.1016/j.ijbiomac.2017.02.048
R. Bhatt, M. Jaffe, Biopolymers in medical implants, in Excipient Applications in Formulation Design and Drug Delivery, ed. by A. Narang, S. Boddu, (Springer, Cham, 2015). https://doi.org/10.1007/978-3-319-20206-8_11
T.K. Biswas, B. Auddy, N.P. Bhattacharya, S. Bhattacharya, B. Mukherjee, Wound healing activity of human placental extracts in rats. Acta Pharmacol. Sin. 22(12), 1113–1116 (2001)
M. Boateng, D.B. Okai, J. Baah, A. Donkoh, Palm kernel cake extraction and utilisation in pig and poultry diets in Ghana. Livest. Res. Rural Dev. 20(7), 99 (2008)
P. Brune, R. Perucchio, A.R. Ingraffea, M.D. Jackson, The toughness of imperial roman concrete, in Proceedings of the 7th International Conference on Fracture Mechanics of Concrete and Concrete Structures (Jeju Island, Korea, 2010), pp. 23–28
A.F. Çabalar, H. Çanakci, Ground improvement by bacteria, in Poromechanics III: Biot Centennial (1905–2005) – Proceedings of the 3rd Biot Conference on Poromechanics (2005), pp. 707–712
L. Cen, W. Liu, L. Cui, W. Zhang, Y. Cao, Collagen tissue engineering: Development of novel biomaterials and applications. Pediatr. Res. 63(5), 492–496 (2008). https://doi.org/10.1203/PDR.0b013e31816c5bc3
D.S. Cha, M.S. Chinnan, Biopolymer-based antimicrobial packaging: A review. Crit. Rev. Food Sci. Nutr. 44(4), 223–237 (2004). https://doi.org/10.1080/10408690490464276
I. Chang, M. Jeon, G.-C. Cho, Application of microbial biopolymers as an alternative construction binder for earth buildings in underdeveloped countries. Int. J. Polym. Sci. 2015, 326745 (2015). https://doi.org/10.1155/2015/326745
I. Chang, J. Im, G.-C. Cho, Introduction of microbial biopolymers in soil treatment for future environmentally-friendly and sustainable geotechnical engineering. Sustainability 8, 251 (2016). https://doi.org/10.3390/su8030251
M.C. Chen, C.T. Liu, H.W. Tsai, W.Y. Lai, Y. Chang, H.W. Sung, Mechanical properties, drug eluting characteristics and in vivo performance of a genipin-crosslinked chitosan polymeric stent. Biomaterials 30(29), 5560–5571 (2009). https://doi.org/10.1016/j.biomaterials.2009.06.039
G.C. Chinga-Carrasco, Novel biocomposite engineering and bio-applications. Bioengineering 5(4), 80–83 (2018). https://doi.org/10.3390/bioengineering5040080
R.J. Chudzikowski, Guar gum and its applications. J. Soc. Cosmet. Chem. 22, 43–60 (1971)
M. Chvapli, Z. Eckmayer, Role of proteins in cosmetics. Int. J. Cosmet. Sci. 7(2), 41–49 (1985). https://doi.org/10.1111/j.1467-2494.1985.tb00395.x
D.G. Coffey, D.A. Bell, A. Henderson, Cellulose and cellulose derivatives, in Food Polysaccharides and Their Applications, ed. by A. M. Stephen, G. O. Phillips, P. A. Williams, 2nd edn., (CRC Press, Boca Raton, 2006), p. 147
D.M. Cole, D.B. Ringelberg, C.M. Reynolds, Small-scale mechanical properties of biopolymers. J. Geotech. Geoenviron. Eng. 138, 1063–1074 (2012)
F.A. Cziple, A.J. Marques, Biopolymers versus synthetic polymers. Anul XV 1, 125–132 (2008)
A. Daramola, E.O. Ibem, Urban environmental problems in Nigeria: Implications for sustainable development. J. Sustain. Dev. Africa 12(1), 124–145 (2010)
L. De Vuyst, B. Degeest, 90 Shahidi, F. and Han, X.Q. (1993) Crit. Rev. Food Sci., 33, 501. FEMS Microbiol. Rev. 23, 153 (1999)
J.T. DeJong, K. Soga, E. Kavazanjian, S. Burns, L.A. Van Paassen, A. Al Qabany, A. Aydilek, S.S. Bang, M. Burbank, L.F. Caslake, C.Y. Chen, X. Cheng, J. Chu, S. Ciurli, A. Esnault-filet, S. Fauriel, N. Hamdan, T. Hata, Y. Inagaki, S. Jefferis, M. Kuo, L. Laloui, J. Larrahondo, D.A.C. Manning, B. Martinez, B.M. Montoya, D.C. Nelson, A. Palomino, P. Renforth, J.C. Santamarina, E.A. Seagren, B. Tanyu, M. Tsesarsky, T. Weaver, Biogeochemical processes and geotechnical applications: Progress, opportunities and challenges. Géotechnique 63(4), 287–301 (2013). https://doi.org/10.1680/geot.SIP13.P.017
H.-J. Endres, Engineering Biopolymers: Markets, Manufacturing, Properties, and Applications (Hanser Publishers, Munich, 2011)
H.-J. Endres, A. Siebert, Y. Kaneva, Overview of the current biopolymers market situation. Bioplastics Magazine 03/07 (2007)
M.A. Esawy, A.A. Gamal, M.M.I. Helal, M.E. Hassan, N.M. Hassanein, A.M. Hashem, Enzymatic synthesis using immobilized Enterococcus faecalis Esawy dextransucrase and some applied studies. Int. J. Biol. Macromol. 92, 56–62 (2016). https://doi.org/10.1016/j.ijbiomac.2016.06.041
S. Fakirov, D. Bhattacharyya, Handbook of Engineering Biopolymers. Homopolymers, Blends, and Composites (Hanser Publications, Munich, 2007)
D.C. Flanagan, K. Chaudhari, L.D. Norton, Polyacrylamide soil amendment effects on runoff and sediment yield on steep slopes: Part I. Simulated rainfall conditions. Trans. ASAE 45(5) (2002). https://doi.org/10.13031/2013.11070
M.A. García, M.N. Martino, N.E. Zaritzky, Plasticized starch-based coatings to improve strawberry (Fragaria × Ananassa) quality and stability. J. Agric. Food Chem. 46(9), 3758–3767 (1998). https://doi.org/10.1021/jf980014c
A. George, P.A. Shah, P.S. Shrivastav, Natural biodegradable polymers based nano-formulations for drug delivery: A review. Int. J. Pharm. 561, 244–264 (2019). https://doi.org/10.1016/j.ijpharm.2019.03.011
R. Gheorghita, L. Anchidin-Norocel, R. Filip, M. Dimian, M. Covasa, Applications of biopolymers for drugs and probiotics delivery. Polymers 13(16), 2729 (2021). https://doi.org/10.3390/polym13162729
F. Gioia, P.P. Ciriello, The containment of oil spills in porous media using xanthan/aluminum solutions, gelled by gaseous CO2 or by AlCl3 solutions. J. Hazard. Mater. 138(3), 500–506 (2006)
H. Gopalakrishnan, J. van Leeuwen, R. Brown, Sustainable Bioenergy and Bioproducts. Value Added Engineering and Applications (Springer, London, 2012)
K. Gopalakrishnan, H. Ceylan, S. Kim, Renewable biomass-derived lignin in transportation infrastructure strengthening applications. Int. J. Sustain. Eng. 6(4), 316–325 (2013). https://doi.org/10.1080/19397038.2012.730069
A. Guzman, N. Gnutek, H. Janik, Biodegradable polymers for food packaging factors influencing their degradation and certification types comprehensive review. Chem. Chem. Technol. 5, 115.e122 (2011)
A.M. Hashem, A.A. Gamal, M.E. Hassan, N.M. Hassanein, M.A. Esawy, Covalent immobilization of Enterococcus faecalis Esawy dextransucrase and dextran synthesis. Int. J. Biol. Macromol. 82, 905–912 (2016). https://doi.org/10.1016/j.ijbiomac.2015.09.076
M. Hemshekhar, R.M. Thushara, S. Chandranayaka, L.L. Sherman, K. Kemparaju, K.S. Girish, Emerging roles of hyaluronic acid bioscaffolds in tissue and regenerative medicine. Int. J. Biol. Macromol. 86, 917–928 (2016)
E.M. Hietala, Poly-L/D-Lactide Stents as Intravascular Devices – An Experimental Study (Tampere University of Technology, 2004)
K. Holm Vibeke, S. Ndoni, J. Risbo, The stability of poly lactic acid packaging films as influenced by humidity and temperature. J. Food Sci. 71(2), 40–44 (2006)
T.A. Hottle, M.M. Bilec, A.E. Landis, Sustainability assessments of bio-based polymers. Polym. Degrad. Stab. 98(9), 1898–1907 (2013). https://doi.org/10.1016/j.polymdegradstab.2013.06.016
S.H. Imam, R.V. Greene, B.R. Zaidi, Biopolymers, in Developed From a Symposium at the Fifth Chemical Congress of North America. Utilizingnaturek Advanced Materials. ACS Symposium Series. Cancún, ROO, Mexico, November 11–15, 1997, p. 723 (1999)
A.J. Jay, I.J. Colquhoun, M.J. Ridout, G.J. Brownsey, V.J. Morris, A.M. Filo, J.H. Leitao, I. Sá-Correia, Carbohydr. Polym., I 35, 179 (1998)
M.S. Jeong, D.-H. Noh, E. Hong, K.S. Lee, T.-H. Kwon, Systematic modeling approach to selective plugging using in situ bacterial biopolymer production and its potential for microbial-enhanced oil recovery. Geomicrobiol. J. 36, 468–481 (2019)
V. Jones, Alginate dressings and diabetic foot lesions. Diabet. Foot J. 2, 8–14 (1999)
J.C. Jung, K. Zhang, B.H. Chon, H.J. Choi, Rheology and polymer flooding characteristics of partially hydrolyzed polyacrylamide for enhanced heavy oil recovery. J. Appl. Polym. Sci. 127(6), 4833–4839 (2013). https://doi.org/10.1002/app.38070
M.S. Kaurov, Engineering Chemistry with Laboratory Experiments (PHI Learning, New Delhi, 2011), pp. 238–240
E. Kavazanjian Jr., E. Iglesias, I. Karatas, Biopolymer soil stabilization for wind erosion control, in Proceedings of the 17th Int Conf Soil Mech. Geotech Eng., vol. 2 (Alexandria, 2009), pp. 881–884
R. Khachatoorian, I.G. Petrisor, C.-C. Kwan, T.F. Yen, Biopolymer plugging effect: Laboratory-pressurized pumping flow studies. J. Petrol. Sci. Eng. 38(1–2), 13–21 (2003). https://doi.org/10.1016/S0920-4105(03)00019-6
T.P. Labuza, W.M. Breene, Application of “active packaging” for improvement of shelf-life and nutritional quality of fresh and extended shelf-life foods. J. Food Process. Preserv. 13(1), 1–69 (1989). https://doi.org/10.1111/j.1745-4549.1989.tb00090.x
S. Lee, J. Im, G.-C. Cho, I. Chang, Laboratory triaxial test behavior of xanthan gum biopolymer-treated sands. Geomech. Eng. 17(5), 445–452 (2019)
K. Leja, G. Lewandowicz, Polymer biodegradation, and biodegradable polymers-A review. Pol. J. Environ. Stud. 19(2), 255–266 (2010)
Z. Li, H.R. Ramay, K.D. Hauch, D. Xiao, M. Zhang, Chitosan–alginate hybrid scaffolds for bone tissue engineering. Biomaterials 26(18), 3919–3928 (2005). https://doi.org/10.1016/j.biomaterials.2004.09.062
F. Lim, A.M. Sun, Microencapsulated islets as bioartificial endocrine pancreas. Science 210(4472), 908–910 (1980). https://doi.org/10.1126/science.6776628
H. Lin, M.T. Suleiman, D.G. Brown, E. Kavazanjian, Mechanical behavior of sands treated by microbially induced carbonate precipitation. J. Geotech. Geoenviron. Eng. 142(2), 04015066 (2016). https://doi.org/10.1061/(ASCE)GT.1943-5606.0001383
C.W. Lin, Y.K. Chen, K.C. Tang, K.C. Yang, N.C. Cheng, J. Yu, Keratin scaffolds with human adipose stem cells: Physical and biological effects toward wound healing. J. Tissue Eng. Regen. Med. 13(6), 1044–1058 (2019). https://doi.org/10.1002/term.2855
H. Liu, E.B. Slamovich, T.J. Webster, Less harmful acidic degradation of poly (lactic- co-glycolic acid) bone tissue engineering scaffolds through titania nanoparticle addition. Int. J. Nanomedicine 1(4), 541–545 (2006). https://doi.org/10.2147/nano.2006.1.4.541
P. Makvandi, G.W. Ali, F.D. Della Sala, W.I. Abdel-Fattah, A. Borzacchiello, Hyaluronic acid/corn silk extract based injectable nanocomposite: A biomimetic antibacterial scaffold for bone tissue regeneration. Mater. Sci. Eng. C, Mater. Biol. Appl. 107, 110195 (2020). https://doi.org/10.1016/j.msec.2019.110195
K.M. Manjanna, T.M. Pramod Kumar, B. Shivakumar, Int. J. ChemTech Res. 2, 509 (2010)
L. Meinel, D.L. Kaplan, Silk constructs for delivery of muskuloskeletal therapeutics. Adv. Drug Deliv. Rev. 64(12), 1111–1122 (2012). https://doi.org/10.1016/j.addr.2012.03.016
S. Meng, Z. Liu, L. Shen, Z. Guo, L.L. Chou, W. Zhong, Q. Du, J. Ge, The effect of layer-by-layer chitosan – Heparin the cothe ating on the endothelialization and coagulation properties of a coronary stent system. Biomaterials 30(12), 2276–2283 (2009). https://doi.org/10.1016/j.biomaterials.2008.12.075
R. Mezzenga, P. Schurtenberger, A. Burbidge, M. Michel, Understanding foods as soft materials. Nat. Mater. 4(10), 729–740 (2005). https://doi.org/10.1038/nmat1496
J.K. Mitchell, J.C. Santamarina, Biological considerations in geotechnical engineering. J. Geotech. Geoenviron. Eng. 131(10), 1222–1233 (2005). https://doi.org/10.1061/(ASCE)1090-0241(2005)131:10(1222)
C. Montecucco, J. Molgó, Botulinal neurotoxins: Revival of an old killer. Curr. Opin. Pharmacol. 5(3), 274–279 (2005). https://doi.org/10.1016/j.coph.2004.12.006
F. Monzer, The role of Colloidal Systems in Environmental Protection (Elsevier, Amsterdam, 2014), pp. 366–368, Chapter 16
F.S. Mostafavi, D. Zaeim, Agar-based edible films for food packaging applications—A review. Int. J. Biol. Macromol. 159, 1165–1176 (2020). https://doi.org/10.1016/j.ijbiomac.2020.05.123
T. Mukherjee, N. Kao, PLA based biopolymer reinforced with natural fibre: A review. J. Polym. Environ. 19(3), 714–725 (2011). https://doi.org/10.1007/s10924-011-0320-6
M. Niaounakis, Biopolymers: Applications and Trends (Elsevier, 2015)
M. Nikkhah, M. Akbar, A. Paul, A. Memic, A. Dolatshahi-Pirouz, A. Khademhosseini, Gelatin-Based Biomaterials for Tissue Engineering and Stem Cell Bioengineering. Biomaterials From Nature for Advanced Devices and Therapies [Chapter], vol 3 (John Wiley & Sons, Hoboken, 2016), pp. 37–62
M. Nioounakis, Chapter 2, section 2.5, in Biopolymers: Reuse, Recycling, and Disposal, 1st edn., (2013), p. 432. Elsevier Science, Amsterdam. Plastics Design Library. no. 7, pp. 747–757, 2014
R.A. Nugent, G. Zhang, R.P. Gambrell, [American Society of Civil Engineers International Conference on Scour and Erosion (ICSE-5) 2010 – San Francisco, California, United States (November 7–10, 2010)] Scour and Erosion – The Effects of Exopolymers on the Erosional Resistance of Cohesive Sediments, pp. 162–171 (2010). https://doi.org/10.1061/41147(392)15
A. Nyström, Collagens in wound healing, in Wound Healing Biomaterials, ed. by M. S. Ågren, vol. 2, (Woodhead Publishing, Duxford, 2016), pp. 171–201
A. Olaiwan, C. Pecquet, P. Mathelier-Fusade, C. Francès, Contact urticaria induced by hydrolyzed wheat proteins in cosmetics. Ann. Dermatol. Venereol. 137(4), 281–284 (2010). https://doi.org/10.1016/j.annder.2010.01.010
J. Ozsvar, S.M. Mithieux, R. Wang, A.S. Weiss, Elastin-based biomaterials and mesenchymal stem cells. Biomater. Sci. 3(6), 800–809 (2015). https://doi.org/10.1039/C5BM00038F
D.K. Platt, Biodegradable Polymers. Rapra Market Report (2006)
S. Prasad, A. Singh, H.C. Joshi, Ethanol as an alternative fuel from agricultural, industrial, and urban residues. Resour. Conserv. Recycl. 50(1), 1–39 (2007). https://doi.org/10.1016/j.resconrec.2006.05.007
A.A. Qabany, K. Soga, Effect of chemical treatment used in MICP on engineering properties of cemented soils. Géotechnique 63(4), 331–339 (2013). https://doi.org/10.1680/geot.SIP13.P.022
M. Rajabi, A. Ali, M. McConnell, J. Cabral, Keratinous materials: Structures and functions in biomedical applications. Mater. Sci. Eng. C, Mater. Biol. Appl. 110, 110612 (2020). https://doi.org/10.1016/j.msec.2019.110612
R. Rebelo, N. Vila, S. Rana, R. Fangueiro, Poly lactic acid fibre based biodegradable stents and their functionalization techniques, in Natural Fibres: Advances in Science and Technology Towards Industrial Applications. RILEM Bookseries, ed. by R. Fangueiro, S. Rana, vol. 12, (Springer, Dordrecht, 2016). https://doi.org/10.1007/978-94-017-7515-1_25
L.N. Reddi, M.V.S. Bonala, Filtration and Drainage in Geotechnical/Geoenvironmental Engineering. Geotechnical Special Publication No. 78. The United States (1998)
D.B. Ringelberg, D.M. Cole, K.L. Foley, C.M. Ruidaz-Santiago, C.M. Reynolds, Compressive strength of soils amended with a bacterial succinoglycan: Effects of soluble salts and organic matter. Can. Geotech. J. 51(7), 747–757 (2014). https://doi.org/10.1139/cgj-2012-0369
J. Rivadeneira, M.C. Audisio, A. Gorustovich, Films based on soy protein-agar blends for wound dressing: Effect of different biopolymer proportions on the drug release rate and the physical and antibacterial properties of the films. J. Biomater. Appl. 32(9), 1231–1238 (2018). https://doi.org/10.1177/0885328218756653
Z. Ruszczak, Effect of collagen matrices on dermal wound healing. Adv. Drug Deliv. Rev. 55(12), 1595–1611 (2003). https://doi.org/10.1016/j.addr.2003.08.003
A. Salerno, L. Verdolotti, M.G. Raucci, J. Saurina, C. Domingo, R. Lamanna, V. Iozzino, M. Lavorgna, Hybrid gelatin-based porous materials with tunable multiscale morphology for tissue engineering and drug delivery. Eur. Polym. J. 99, 230–239 (2018). https://doi.org/10.1016/j.eurpolymj.2017.12.024
D. Schmaljohann, Thermo- and pH-responsive polymers in drug delivery. Adv. Drug Deliv. Rev. 58(15), 1655–1670 (2006). https://doi.org/10.1016/j.addr.2006.09.020
G. Secchi, Role of protein in cosmetics. Clin. Dermatol. 26(4), 321–325 (2008). https://doi.org/10.1016/j.clindermatol.2008.04.004
K.C. Seto, B. Güneralp, L.R. Hutyra, Global forecasts of urban expansion to 2030 and direct impacts on biodiversity and carbon pools. Proc. Natl. Acad. Sci. U. S. A. 109(40), 16083–16088 (2012). https://doi.org/10.1073/pnas.1211658109
F. Shahidi, X.Q. Han, Encapsulation of food ingredients. Crit. Rev. Food Sci. Nutr. 33(6), 501–547 (1993). https://doi.org/10.1080/10408399309527645
A. Shavandi, T.H. Silva, A.A. Bekhit, A. Bekhit, Keratin: Dissolution, extraction, and biomedical application. Biomater. Sci. 5(9), 1699–1735 (2017). https://doi.org/10.1039/c7bm00411g
A. Sionkowska, S. Skrzyński, K. Śmiechowski, A. Kołodziejczak, The review of versatile application of collagen. Polym. Adv. Technol. 28(1), 4–9 (2017). https://doi.org/10.1002/pat.3842
R. Smith, Biodegradable Polymers for Industrial Applications (CRC Press, Boca Raton, 2005)
A.M. Smith, R.M. Shelton, Y. Perrie, J.J. Harris, An initial evaluation of gellan gum as a material for tissue engineering applications. J. Biomater. Appl. 22(3), 241–254 (2007). https://doi.org/10.1177/0885328207076522
S. Smitha, A. Sachan, Use of agar biopolymer to improve the shear strength behavior of Sabarmati sand. Int. J. Geotech. Eng. 10(4), 387–400 (2016). https://doi.org/10.1080/19386362.2016.1152674
C.V. Stevens, Renewable Bioresources. Scope and Modification for Nonfood Applications (John Wiley, Chichester, 2004)
G. Sworn, G.R. Sanderson, W. Gibson, Gellan gum fluid gels. Food Hydrocoll. 9(4), 265–271 (1995). https://doi.org/10.1016/S0268-005X(09)80257-9
T.H.Y. Tran, D.W. Yang, M. Kim, D.H. Lee, M. Gai, F. Di Cunto, K.W. Choi, D.S. Lim, Citron kinase interacts with LATS2 and inhibits its activity by occluding its hydrophobic phosphorylation motif. J. Mol. Cell. Biol. 11(11), 1006–1017 (2019)
G.R. Timerbaeva, Y.S. Zimin, I.M. Borisov, et al., Radical mechanism of pectin oxidation in aqueous solution. Russ. J. Appl. Chem. 80, 1914–1917 (2007). https://doi.org/10.1134/S1070427207110274
S. Togashi, N. Takahashi, M. Iwama, S. Watanabe, K. Tamagawa, T. Fukui, Antioxidative collagen-derived peptides in the human-placenta extract. Placenta 23(6), 497–502 (2002). https://doi.org/10.1053/plac.2002.0833
G.P. Udayakumar, S. Muthusamy, B. Selvaganesh, N. Sivarajasekar, K. Rambabu, F. Banat, S. Sivamani, N. Sivakumar, A. Hosseini-Bandegharaei, P.L. Show, Biopolymers and composites: Properties, characterization and their applications in food, medical and pharmaceutical industries. J. Environ. Chem. Eng. 9(4), 105322 (2021). https://doi.org/10.1016/j.jece.2021.105322
H. Van Duong, T.T.L. Chau, N.T.T. Dang, D.V. Nguyen, S.L. Le, T.S. Ho, T.P. Vu, T.T.V. Tran, T.D. Nguyen, Self-aggregation of water-dispersible nano collagen helices. Biomater. Sci. 6(3), 651–660 (2018). https://doi.org/10.1039/c7bm01141e
L. Vermeiren, F. Devlieghere, M. van Beest, N. de Kruijf, J. Debevere, Developments in the active packaging of foods. Trends Food Sci. Technol. 10(3), 77–86 (1999). https://doi.org/10.1016/S0924-2244(99)00032-1
X. Wang, N. Chi, X. Tang, Preparation of estradiol chitosan nanoparticles for improving nasal absorption and brain targeting. Eur. J. Pharm. Biopharm. 70(3), 735–740 (2008). https://doi.org/10.1016/j.ejpb.2008.07.005
H. Wang, D. Wei, A. Zheng, H. Xiao, Soil burial biodegradation of antimicrobial biodegradable PBAT films. Polym. Degrad. Stab. 116, 14–22 (2015). https://doi.org/10.1016/j.polymdegradstab.2015.03.007
S.K. Williams, J.L. Oblinger, R.L. West, Evaluation of a calcium alginate film for use on beef cuts. J. Food Sci. 43(2), 292–296 (1978). https://doi.org/10.1111/j.1365-2621.1978.tb02288.x
B. Xiong, R.D. Loss, D. Shields, T. Pawlik, R. Hochreiter, A.L. Zydney, M. Kumar, Polyacrylamide degradation and its implications in environmental systems. npj Clean Water 1(1), 17 (2018). https://doi.org/10.1038/s41545-018-0016-8
P. Yadav, H. Yadav, V.G. Shah, G. Shah, G. Dhaka, Biomedical biopolymers, their origin and evolution in biomedical sciences: A systematic review. J. Clin. Diagn. Res. 9(9), ZE21–ZE25 (2015). https://doi.org/10.7860/JCDR/2015/13907.6565
S. Yu, X. Xu, J. Feng, M. Liu, K. Hu, Chitosan and chitosan coating nanoparticles for the treatment of brain disease. Int. J. Pharm. 560, 282–293 (2019). https://doi.org/10.1016/j.ijpharm.2019.02.012
N. Zabihollahi, A. Alizadeh, H. Almasi, S. Hanifian, H. Hamishekar, Development and characterization of carboxymethyl cellulose-based probiotic nanocomposite film containing cellulose nanofiber and inulin for chicken fillet shelf life extension. Int. J. Biol. Macromol. 160, 409–417 (2020). https://doi.org/10.1016/j.ijbiomac.2020.05.066
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 Springer Nature Singapore Pte Ltd.
About this entry
Cite this entry
Shasiya, P.S., Simi Pushpan, K., Nair, A.B. (2022). Biopolymers as Engineering Materials. In: Thomas, S., AR, A., Jose Chirayil, C., Thomas, B. (eds) Handbook of Biopolymers . Springer, Singapore. https://doi.org/10.1007/978-981-16-6603-2_23-1
Download citation
DOI: https://doi.org/10.1007/978-981-16-6603-2_23-1
Received:
Accepted:
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-6603-2
Online ISBN: 978-981-16-6603-2
eBook Packages: Springer Reference Chemistry and Mat. ScienceReference Module Physical and Materials ScienceReference Module Chemistry, Materials and Physics