Abstract
The present investigation aims to analyze engine vibrations and HC emissions when causing faults not detected by the on-board diagnostic system (OBD II) in the air induction system and the ignition system of a gasoline vehicle. First, experimental measurements were performed with a vibration analyzer and a unidirectional accelerometer mounted on the engine block. In parallel, hydrocarbon (HC) measurements were performed to contrast the influence of combustion with the simulated failures. Secondly, signal processing was performed by applying the fast Fourier transform to a set of blocks superimposed on an interval of 512 points, in order to force the periodicity of the signal and thus have the most information related to the degree of severity of the failures. The results obtained indicate that the failure of a spark plug causes higher vibrations in the engine, and this is associated with a higher amount of HC amounting to 188 ppm for the use of fuel with a RON of 87.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
H. Lin, K. Ding, A new method for measuring engine rotational speed based on the vibration and discrete spectrum correction technique. Measurement 46, 2056–2064 (2013)
C.D. Dicenzo, B. Szabados, N.K. Sinna, Digital measurement of angular velocity for instrumentation and control. IEEE Trans. Ind. Electron. Control Instrum. IECI 23(1), 83–86 (1976)
B. Li, S.-S. Mi, P.-Y. Liu, Z.-J. Wang, Classification of time-frequency representations using improved morphological pattern spectrum for engine fault diagnosis. Sound Vib. 332, 3329–3337 (2013)
Y. Lee, S. Lee, H. Choi, et al., Analysis of vibration on an engine block caused by combustion in a diesel engine. Int. J. Autom. Technol. 20, 187–195 (2019)
S. Ji, X. Lan, J. Lian, H. Wang, M. Li, Y. Cheng, W. Yin, Combustion parameter estimation for ICE from surface vibration using frequency spectrum analysis. Measurement 128, 485–494 (2018)
C. Mobley, Non-intrusive in-cylinder pressure measurement of internal combustion engines. SAE Technical Paper 1999-01-0544 (1999)
R. Villarino, J. Böhme, Peak pressure position estimation from structure-borne sound. SAE Technical Paper 2005-01-0040 (2005)
R. Johnsson, Cylinder pressure reconstruction based on complex radial basis function networks from vibration and speed signals. Mech. Syst. Signal Process. 20, 1923–1940 (2006)
Z. Özçelik, N. Gültekin, Effect of iridium spark plug gap on emission, noise, vibration of an internal combustion engine. Energy Appl. 6, 44–48 (2019)
S.A. Moosavian, G. Najafi, B. Ghobadian, S.M. Jafari, B. Sakhaei, M. Khazaee, Fault diagnosis in engine spark plug by vibration analysis using neural network. Engine Res. 28, 21–29 (2013)
Z.g. Zhang, E. Jiaqiang, G. Zhang, A novel dense spectrum correction algorithm for extracting vibration signals in internal combustion engine and its application. J. Cent. South Univ. 19, 2810–2815 (2012)
Y. Huang, E.C.Y. Ng, Y. Yam, C.K.C. Lee, N.C. Surawski, W. Mok et al., Impact of potential engine malfunctions on fuel consumption and gaseous emissions of a euro VI diesel truck. Energy Convers. Manag. 184, 521–529 (2019)
T. Badawy, X. Bao, H. Xu, Impact of spark plug gap on flame kernel propagation and engine performance. Appl. Energy 191, 311–327 (2017)
N.J. Bugli, Automotive Engine Air Cleaners—Performance Trends. SAE Technical Paper (2001)
J.A. Grajales, H. Quintero, J. Lopez Lopez, C. Romero, E. Henao, O. Cardona, Engine diagnosis based on vibration analysis using different fuel blends. Diagnostyka 18, 27–36 (2018)
I. Gravalos, S. Loutridis, D. Moshou, T. Gialamas, D. Kateris, Z. Tsiropoulos, P. Xyradakis, Detection of fuel type on a spark ignition engine from engine vibration behaviour. Appl. Therm. Eng. 54, 171–175 (2013)
G. DeBotton, Vibration signature analysis as a fault detection method for SI engines. SAE Trans. 107(1998), 1–6 (2021)
K. Jafarian, M. Mobin, R. Jafari-Marandi, E. Rabiei, Misfire and valve clearance faults detection in the combustion engines based on a multi-sensor vibration signal monitoring. Measurement 527–536 (2018)
J.-D. Wu, C.-Q. Chuang, Fault diagnosis of internal combustion engines using visual dot patterns of acoustic and vibration signals. NDT E Int. 38(8), 605–614 (2005)
N. Gültekin, M. Mayda, Investigation of effects of spark plug gap on vibration, noise and HC emission in a gasoline engine. Int. J. Energy Appl. Technol. 5, 56–60 (2018)
S. Klinchaeam, P. Nivesrangsan, M. Lokitsangthong, Condition monitoring of a small four-stroke petrol engine using vibration signals. KMITL Sci. Technol. J. 9, 9–17 (2009)
X. Zhao, Y. Cheng, L. Wang, S. Ji, Real time identification of the internal combustion engine combustion parameters based on the vibration velocity signal. J. Sound Vib. 390, 205–217 (2017)
L. Barelli, G. Bidini, C. Buratti, R. Mariani, Diagnosis of internal combustion engine through vibration and acoustic pressure non-intrusive measurements. Appl. Therm. Eng. 29(8–9), 1707–1713 (2009)
NTE INEN 2204:2016: Gestión Ambiental. Aire. Vehículos Automotores. Límites Permitidos de Emisiones Producidos por Fuentes Móviles Terrestres que Utilizan Gasolina, Quito-Ecuador (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Sinche, D.D., Calderón, J.C., Jaura, R.C. (2022). Vibrations Associated with the Quality of Combustion Derived from Induced Failures in a Spark Ignition Engine. In: Rocha, Á., López-López, P.C., Salgado-Guerrero, J.P. (eds) Communication, Smart Technologies and Innovation for Society . Smart Innovation, Systems and Technologies, vol 252. Springer, Singapore. https://doi.org/10.1007/978-981-16-4126-8_67
Download citation
DOI: https://doi.org/10.1007/978-981-16-4126-8_67
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-4125-1
Online ISBN: 978-981-16-4126-8
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)