Abstract
Firstly, this paper introduces the industrial robot control system. Then, the development and research status of the open industrial robot control system are summarized, and this paper focuses on the hardware structure and software structure of the open industrial robot control system. And the application status of the typical multi-robot collaboration system is analyzed. Finally, the future development direction of the open robot control system is prospected.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Zhang, R., Zhang, W., Zheng, W.: Discussion on the status quo and development of industrial robots. Intell. Robot 4, 37–39+65 (2018)
Wang, T., Tao, Y.: Current status and industrialization development strategy of industrial robot technology in China. J. Mech. Eng. 50(09), 1–13 (2014)
Meng, M., Zhou, C., Chen, L., Feng, W., Miao, C.: A review of the development and application of industrial robots. J. Shanghai Jiaotong Univ. 50(S1), 98–101 (2016)
Sun, B., Yang, L.: Overview of open robot controllers. Robot 23(4), 374–378 (2001)
Song, W.: Research and development of key technologies of open intelligent control system based on multi-robot. Tianjin University, Tianjin (2012)
Gao, G., Hou, J.: China’s manufacturing industry from the perspective of Industry 4.0–Dilemma, Motivation and Orientation. J. Theor. Perspect. 11, 46–48 (2015)
Li, H., Ruwang, M., et al.: Perspective of industrial seismic instrument assembly. In: 2016 16th International Symposium on Communications and Information Technologies (ISCIT) (2016)
Wang, Z., Yunjiang, L., Yue, L., et al.: An open control system architecture with an on-line velocity filter for industrial robots. In: 2012 IEEE International Conference on Robotics and Biomimetics (ROBIO) (2012)
Pan, L.: Research on Open Robot Controller and Related Technology. Huazhong University of Science and Technology, Wuhan (2007)
Lu, D., Zheng, S.: Summary of research on open control system of industrial robots. Electr. Autom. 39(01), 88–91 (2017)
Wang, N., Qu, D.: The open architecture of industrial robot control system. Robotics 03, 256–261 (2002)
Li, J.: Research on PUMA560 robot control system on open structure platform. Zhejiang University, Hangzhou (2002)
Jerry, D., Jeremy, H.G., et al.: Hybrid systems in robotics. IEEE Robot. Autom. Mag. 18, 33–43 (2011)
Kilyen, A.O., Letia, T.S.: Hybrid robot controller synthesis with GP and UETPN. In: 2018 IEEE International Conference on Automation, Quality and Testing, Robotics (AQTR), Cluj-Napoca, pp. 1–6 (2018)
Lutz, P., Sperling, W.: OSACA-the vendor neutral control architecture. In: Proceedings of the European Conference on Integration in Manufacturing, Dresden, Germany, pp. 247–256 (1997)
Li, Z., Liu, B.: Research on open robot control architecture based on OSACA. Combined Mach. Tool Autom. Process. Technol. 03, 70–72+74 (2003)
Zhunan, F.: Research on SCARA manipulator open control system based on OSACA model. Zhejiang University (2019)
Chihiro, S., Okano, A.: Open controller architecture OSEC-II: architecture overview and prototype systems. In: Proceedings of IEEE 6th International Conference on Emerging Technologies and Factory Automation, pp. 543–550 (2017)
Ma, X., Han, Z., Wang, Y., et al.: Development of a PC-based open architecture software-CNC system. Chin. J. Aeronaut. 03, 272–281 (2007)
Tang, F., Geng, S.R., Qiang, C., et al.: Open robot control platform based on LSOA. Appl. Mech. Mater. (2013)
Xia, J., Zhang, H., Wang, G., et al.: Study on open robotic plasma spray forming system based on ethernet. Robot 01, 17–21 (2008)
Zhenhua, W., Xu, L., et al.: Research and development of Open 6R industrial robot control system based on Win CE. Combined Mach. Tool Autom. Process. Technol. 6, 76–80 (2018)
Abdelfetah, H., Abderraouf, M., et al.: A survey of development frameworks for robotics. In: 8th International Conference on Modelling, Identification and Control (ICMIC-2016), pp. 67–72
Ding, L., Wang, D., Li, T., Yang, Y.: A brief introduction to CLARAty software system. Mach. Tool Hydraul. 40(17), 118–122 (2012)
Montemerlom, R., Thrun, S.: Perspectives on standardization in mobile robot programming: the Carnegie Mellon navigation (CARMEN) toolkit. In: 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2003. Proceedings, vol. 3. IEEE, New York, pp. 2436–2441 (2003)
Brooks, A., Kaupp, T., Makarenko, A., et al.: Orca: components for robotics. In: IEEE/RSJ International Conference on Intelligent Robots and Systems, Workshop on Robotic Standardization, pp. 163–168 (2006)
Panagiota, T., Sotiris, M., George, M., et al.: ROS based coordination of human robot cooperative assembly tasks-an industrial case study. Proc. CIRP 37(1), 254–259 (2015)
Liu, F.: Design and implementation of ROS-based intelligent industrial robot system. University of Chinese Academy of Sciences (Institute of Computing Technology, Chinese Academy of Sciences) (2017)
Maosheng, T., Tang, X., Zhang, Y.: Implementation and design of open control system for industrial robot based on double CPU. In: 2011 IEEE 2nd International Conference on Computing Control and Industrial Engineering (2011)
Mou, H.: Analysis and research on motion control of industrial robots. Electr. Technol. Softw. Eng. 23, 115–117 (2018)
Huang, J.: Research on Cartesian impedance control system of manipulator in human-machine collision environment. Harbin: Harbin Institute of Technology (2009)
Zhongzhong, H.: Design of open industrial robot control system based on multi-axis motion control card. Hefei University of Technology (2015)
Wang, T., Qu, D.: The open architecture of industrial robot control system. Robot 24(3), 256–261 (2002)
Tian, S.: Development of six-axis robot control system based on EtherCAT bus. South China University of Technology (2018)
Hu, G.: Research on open networked robot communication platform and control method. Southeast University (2005)
Kocian, J., Kozio, R.: An outline of advanced process control and self tuning techniques on plc background. In: 2010 IEEE Conference on Emerging Technologies and Factory Automation (ETFA), pp. 1–8. IEEE, New York (2010)
Qin, Y., Luo, D.: Design of welding control system based on robot. In: 2016 International Conference on Electrical Engineering and Automation (ICEEA 2016)
Yan, H.: Research and implementation of industrial robot system based on PLC control. Southeast University, Nanjing (2005)
Wang, Y., Chen, K., et al.: Design of control system for material sorting manipulator based on PLC. J. Qingdao Technol. Univ. 40(01), 108–112 (2019)
Yassine, B.: Distributed second order sliding mode control for networked robots synchronisation: theory and experimental results. Int. J. Modell. Ident. Control (IJMIC2018)
Youngwoo, L., Wonsuk, L.: Reliable software architecture design with EtherCAT for a rescue robot. In: 2016 IEEE International Symposium on Robotics and Intelligent Sensors (IRIS), pp. 34–39 (2016)
Chen, Y., Chang, S., Feng, Q.: Industrial robot system based on CPS method. J. Beijing Univ. Aeronaut. Astronaut. 44(05), 931–938 (2018)
Liu, F.: Design and implementation of ROS-based intelligent industrial robot system. University of Chinese Academy of Sciences (Shenyang Institute of Computing Technology, Chinese Academy of Sciences) (2017)
Bruyninckxh. Open robot control software: the OROCOS project. In: Proceedings 2001 ICRA. IEEE International Conference on Robotics & Automation, pp. 2523–2528 (2001)
McKenzie, A., Gay, D., et al.: Comparing temporally aware mobile robot controllers built with Sun’s Java Real-Time System, OROCOS’s real-time toolkit and player. In: 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems (2010)
Microsoft. Microsoft Robotics Studio. http://www.microsoft.com/robotics/
iRobot. iRobot AWARE. http://www.irobot.cn/
Player. Playe. http://playerstage.sourceforge.net/
Muratore, L., Laurenzi, A., et al.: XbotCore: a real-time cross-robot software platform. In: IEEE International Conference on Robotic Computing, IRC17 (2017)
Jia, T., Wen, X.: A review of group robot systems research. J. Shenyang Aerosp. Univ. 35(05), 78–84 (2018)
Yang, K.: Multi-robot coordinated motion control system. University of Electronic Science and Technology (2010)
Li, L., Li, Y., Bing, L.: Formation control for multiple robots in uncertain environments. In: Proceedings of the 10th World Congress on Intelligent Control and Automation (2012)
Gan, Y., Dai, X.: Design of multi-robot collaborative fixtureless welding system. Control Eng. 20(03), 397–403 (2013)
Huang, Y.: Research on the space synchronization tracking control method for multi-manipulator system, p. 2. Beijing Mechanics Association (2013)
Wang, Y., Tan, D., Huang, J., et al.: A multi-agent robot collaborative assembly system. High-Tech Commun. 07, 8–12 (1998)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Xiao, L., Gong, J., Chen, J. (2020). Industrial Robot Control Systems: A Review. In: Wang, R., Chen, Z., Zhang, W., Zhu, Q. (eds) Proceedings of the 11th International Conference on Modelling, Identification and Control (ICMIC2019). Lecture Notes in Electrical Engineering, vol 582. Springer, Singapore. https://doi.org/10.1007/978-981-15-0474-7_101
Download citation
DOI: https://doi.org/10.1007/978-981-15-0474-7_101
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-0473-0
Online ISBN: 978-981-15-0474-7
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)