Abstract
In industries, the use of heat exchanger is badly necessary to transfer heat through fluid. For such purpose, control of temperature has a great role, so that PID controller is used vastly. This paper basically focuses upon the feed-forward–feedback control strategy involved along with the PID controller. This control strategy cancels the effect of the measured disturbances and load changes in the system. The use of fuzzy controller tuning of PID controller makes the system intelligent and robust. The simulation results endorse the effectiveness of fuzzy controller-based tuning along with the feed-forward–feedback control strategy.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Padhee, S., Khare, Y.B., Singh, Y.: Internal model based PID control of shell and tube heat exchanger system. In: Students’ Technology Symposium (TechSym), pp. 297–302. IEEE. (2011)
Ang, K.H., Chong, G., Li, Y.: PID control system analysis, design, and technology. IEEE Trans. Control Syst. Technol. 13(4), 559–576 (2005)
Wang, L., Barnes, T.J.D., Cluett, W.R.: New frequency-domain design method for PID controllers. IEE Proc. Control Theor. Appl. 142(4), 265–271 (1995)
Sahoo, A., Radhakrishnan, T.K., Rao, C.S.: Modeling and control of a real time shell and tube heat exchanger. Resour. Efficient Technol. 3(1), 124–132 (2017)
Nishikawa, Y., Sannomiya, N., Ohta, T., Tanaka, H.: A method for auto-tuning of PID control parameters. Automatica 20(3), 321–332 (1984)
Tabatabaee, S., Roosta, P., Sadeghi, M.S., Barzegar, A.: Fuzzy PID controller design for a heat exchanger system: the energy efficiency approach. In: IEEE International Conference on Computer Applications and Industrial Electronics (ICCAIE), pp. 511–515 (2010)
Vasickaninova, A., Bakosova, M., Meszaros, A., Oravec, J.: Fuzzy controller design for a heat exchanger. In: IEEE 19th International Conference on Intelligent Engineering Systems (INES). IEEE, pp. 225–230, Sept 2015
Skrjanc, I., Matko, D.: Predictive functional control based on fuzzy model for heat-exchanger pilot plant. IEEE Trans. Fuzzy Syst. 8(6), 705–712 (2000)
Mazinan, A.H., Sadati, N.: Fuzzy multiple models predictive control of tubular heat exchanger. In: IEEE International Conference on Fuzzy Systems. FUZZ-IEEE World Congress on Computational Intelligence. IEEE, pp. 1845–1852, June 2008
Fischer, M., Nelles, O., Isermann, R.: Adaptive predictive control of a heat exchanger based on a fuzzy model. Control Eng. Practice 6(2), 259–269 (1998)
Mohanty, M.D., Mohanty, M.N.: Design of intelligent PD controller for water supply in healthcare systems. In: Proceedings of the First International Conference on Information Technology and Knowledge Management, Annals of Computer Science and Information Systems, vol. 14, pp. 95–98 (2017)
Mohanty, M.D., Mohanty, M.N.: Design of an intelligent controller for 6 degrees of freedom quad rotor UAV. In: International Conference on Information Technology (ICIT) (2018) (Accepted)
Garduno-Ramirez, R., Lee, K.Y.: Wide range operation of a power unit via feedforward fuzzy control [thermal power plants]. IEEE Trans. Energy Convers. 15(4), 421–426 (2000)
Maidi, A., Diaf, M., Corriou, J.P.: Optimal linear PI fuzzy controller design of a heat exchanger. Chem. Eng. Process. 47(5), 938–945 (2008)
Torshizi, A.D., Zarandi, M.H.F., Zakeri, H.: On type-reduction of type-2 fuzzy sets: A review. Appl. Soft Comput. 27, 614–627 (2015)
Stylios, C.D., Groumpos, P.P.: Modeling complex systems using fuzzy cognitive maps. IEEE Trans. Syst. Man Cybern. Part A Syst. Hum. 34(1), 155–162 (2004)
Shi, L., Kapur, K.C.: A synthesis of feedback and feedforward control for process improvement under stationary and nonstationary time series disturbance models. Qual. Reliab. Eng. Int. 31(3), 343–354 (2015)
Khare, Y.B., Singh, Y.: PID control of heat exchanger system. Int. J. Comput. Appl. 8(6), 0975–8887 (2010)
Ismail, E.E., Abdel Rassoul, R., Abdelbary, A., El Said, O.M.: Improving the performance of heat exchanger system by better control circuits. Int. J. Comput. Appl. 121(11) (2015)
Padhee, S.: Controller design for temperature control of heat exchanger system: Simulation Studies. WSEAS Trans. Syst. Control 9, 485–491 (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Mohanty, M.D., Mohanty, M.N. (2020). Design of Fuzzy Logic-Based PID Controller for Heat Exchanger Used in Chemical Industry. In: Patnaik, S., Ip, A., Tavana, M., Jain, V. (eds) New Paradigm in Decision Science and Management. Advances in Intelligent Systems and Computing, vol 1005. Springer, Singapore. https://doi.org/10.1007/978-981-13-9330-3_37
Download citation
DOI: https://doi.org/10.1007/978-981-13-9330-3_37
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-9329-7
Online ISBN: 978-981-13-9330-3
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)