Abstract
This chapter discusses the indoor air quality of industrial buildings with high pollution sources. Firstly, the basic characteristics of indoor air quality in industrial buildings and the differences between industrial buildings and civil buildings in indoor source and control demand are briefly introduced. Then it discusses the emission and diffusion characteristics of three kinds of typical pollutants in industrial buildings with high pollution sources: high-temperature particles, droplets, and harmful gases, and introduces the analysis methods and research conclusions of these pollutants in the indoor environmental control of industrial buildings. On this basis, the refined ventilation control methods for indoor air pollution in industrial buildings in recent years are presented, including zoning environmental control strategy for overall indoor air quality and novel local ventilation technology for centralized pollution sources. Finally, the assessment indexes of high pollution industrial buildings in different industrial sectors in China and three prediction methods for indoor air quality schemes are introduced.
Similar content being viewed by others
References
ACGIH (2010) Industrial ventilation: a manual of recommended practice for design, 27th edn. ACGIH, Cincinnati
ANSYS (2011) ANSYS fluent user’s guide. ANSYS, Inc, Canonsburg
Baoshan Iron and Steel Co., Ltd et al (2012) Emission standard of air pollutants for steel rolling industry. China Environmental Science Press, Beijing
Belding HS, Hatch TF (1955) Index for evaluating heat stress in terms of resulting physiological strains. Heat Piping Air Cond 52:35
China Association for Engineering Construction Standardization (CECS) (2021) Standard for environment assessment of high-pollution industrial building (T/CECS 980-2021). China Association for Engineering Construction Standardization (CECS), Beijing
China Nonferrous Metal Industry Association (2015) Design code for heating ventilation and air conditioning of industrial buildings. China Planning Press, Beijing
CINF Engineering Co., Ltd et al (2010) Emission standards of pollutants for lead and zinc industry. China Environmental Science Press, Beijing
Duan M et al (2017) Modeling dispersion mode of high-temperature particles transiently produced from industrial processes. Build Environ 126:457–470
Fan J-N et al (2021) Emission and local ventilation control of droplets generated by condensation and bubble-bursting during pickling. Sustain Cities Soc 76:103491
Gelain T, Prevost C (2015) Experimental and numerical study of light gas dispersion in a ventilated room. Nucl Eng Des 293:476–484
Goodfellow H et al (2021) Industrial ventilation design guidebook. Academic Press, Cambridge, MA
Han O, Zhang Y, Li AG et al (2020) Experimental and numerical study on heavy gas contaminant dispersion and ventilation design for industrial buildings. Sustain Cities Soc 55:102016
HSE (2017) Controlling airborne contaminants at work: a guide to local exhaust ventilation (LEV). Series code HSG258, health and safety executive
Huang Y et al (2021a) Experimental study of induced airflow characteristics during liquid metal pouring process through PIV, thermography, and color schlieren imaging. Int J Therm Sci 170:107–144
Huang Y et al (2021b) Flow-field evolution and vortex structure characteristics of a high-temperature buoyant jet. Build Environ 187:107–407
Huang Y et al (2021c) Chapter 4. Experimental techniques. In: Industrial ventilation design guidebook, 2nd edn. Academic Press, Cambridge, MA, pp 185–277
Huang Y et al (2022) Transport characteristics of pulsating high-temperature particles based on vortex structure analysis by large-eddy simulation. Build Environ 209:108679
Laporthe S, Virgone J, Castanet S (2001) A comparative study of two tracer gases: SF6 and N2O. Build Environ 36:313–320
Li YG, Delsante A, Symons J (1997) Residential kitchen range hoods-buoyancy-capture principle and capture efficiency revisited. Indoor Air 7:151–157
Liu D, Zhao FY, Wang HQ (2012) History recovery and source identification of multiple gaseous contaminants releasing with thermal effects in an indoor environment. Int J Heat Mass Transf 55:422–435
National Health Commission of the People’s Republic of China (2019) Occupational limits for hazardous agents in the workplace – part 1: chemical hazardous agents. National Health Commission of the People’s Republic of China, Beijing
National Health Commission of the People’s Republic of China (2020) Statistical bulletin of health development in China in 2020 – material from China government network. http://www.nhc.gov.cn/guihuaxxs/s10743/202107/af8a9c98453c4d9593e07895ae0493c8.shtml
National Institute of Environmental Health, China CDC et al (2002) Indoor air quality standard
Niemela R, Lefevre A, Muller JP, Aubertin G (1991) Comparison of three tracer gases for determining ventilation effectiveness and capture efficiency. Ann Occup Hyg 4:405–417
Ricciardi L, Prévost C, Bouilloux L, Sestier-Carlin R (2008) Experimental and numerical study of heavy gas dispersion in a ventilated room. J Hazard Mater 152(2):493–505
Tianjin Academy of Environmental Sciences et al (2011) Emission standard of pollutants for rubber products industry. China Environmental Science Press, Beijing
Wang Y, Cao ZX (2017) Industrial building environment: old problem and new challenge. Indoor Built Environ 26:1035–1039
Wang Y, Cao Y, Meng X (2019) Energy efficiency of industrial buildings. Indoor Built Environ 28(3):293–297
WHO (2017) Global Health Observatory (GHO). Available at: http://www.who.int/gho/en/
Wyndham CH, Allan AM, Bredell GAG, Andrew R (1967) Assessing the heat stress and establishing limits for work in a hot mine. Br J Ind Med 24:255
Yaglou CP, Minard D (1957) Control of heat casualties at military training centers. AMA Arch Ind Health 16:302
Yang Y, Song B, Wang Y, Fan J-N, Karkric M, Wei Y (2019a) Numerical investigation of motion of sulfuric and hydrochloric droplets with phase change in free-falling process. Build Environ 157:16–23
Yang Y, Wang Y, Song B, Fan J, Cao Y, Duan M (2019b) Transport and control of droplets: A comparison between two types of local ventilation airflows. Powder Technology 345:247–259
Zhang Y, Wang L, Li A et al (2019) Performance evaluation by computational fluid dynamics modelling of the heavy gas dispersion with a low Froude number in a built environment. Indoor Built Environ 29(5):1420326X1985604
Zhou Y, Wang MY, Wang Y, Cui HH, Wang JL (2018) Development of self-label method to distinguish supply air from room air without tracer in numerical simulations. Build Environ 145:223–233
Zimmer AT, Biswas P (2001) Characterization of the aerosols resulting from arc welding processes. J Aerosol Sci 32:993–1008
Zimmer AT, Baron PA, Biswas P (2002) The influence of operating parameters on number-weighted aerosol size distribution generated from a gas metal arc welding process. J Aerosol Sci 33:519–531
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 Springer Nature Singapore Pte Ltd.
About this entry
Cite this entry
Wang, Y., Zhang, T., Cao, Z., Wang, Z. (2022). Indoor Air Quality in Industrial Buildings. In: Zhang, Y., Hopke, P.K., Mandin, C. (eds) Handbook of Indoor Air Quality. Springer, Singapore. https://doi.org/10.1007/978-981-10-5155-5_80-1
Download citation
DOI: https://doi.org/10.1007/978-981-10-5155-5_80-1
Received:
Accepted:
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-5155-5
Online ISBN: 978-981-10-5155-5
eBook Packages: Springer Reference Earth and Environm. ScienceReference Module Physical and Materials ScienceReference Module Earth and Environmental Sciences