Zusammenfassung
In den bisherigen Kapiteln wird beispielsweise bei der Regelung von Drehfeldmaschinen mittels Entkopplung oder der feldorientierten Regelung ein Drehzahlsensor bei der Asynchronmaschine oder ein Lagegeber bei der Synchronmaschine vorausgesetzt. Es besteht nun der Wunsch, diese Sensoren zu vermeiden und vorzugsweise nur die leicht zugänglichen Signale wie Statorstrom und Statorspannung zu verwenden. Diese Signale werden u. a. auch zur Stromeinprägung benötigt und sind somit bereits vorhanden.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
Literatur
A. Abbondanti. „Method of flux control in induction motors driven by variable frequency, variable voltage supplies“. In: Proc. IEEE-IAS Int. Semi-Annual Power Conversion Conf. Bd. 977. 1977, S. 77–84 (siehe S. 1123).
B. D. Anderson und J. B. Moore. Optimal Control. Linear Quadratic Methods. Precentice Hall Information and System Sciences Series. Englewood Cliffs, New Jersey: Prentice Hall International Inc., 1989 (siehe S. 1135).
C. Attaianese und A. Perfetto. „A speed sensorless digitally controlled induction motor drive“. In: Proceedings of the Conference PEMC’93. 1994, S. 1358–1363 (siehe S. 1131).
M. Boussak, G. Capolino und V. Nguyen Phouc. „Speed measurement in vector-controlled induction machine by adaptive method“. In: 4th European Conf. on Power Electronics and Applications. Bd. 3. 1991, S. 653–653 (siehe S. 1119).
M. Boussak, G. Capolino und M. Poloujadoff. „Parameter identification in vector-controlled induction machine with flux model reference adaptive system“. In: Proceedings International Conference on Electrical Machines (ICEM’92). Bd. 3. 1992, S. 838–842 (siehe S. 1119).
U. Baader, M. Depenbrock und G. Gierse. „Direct self control of inverter-fed induction machine, a basis for speed control without speed-measurement“. In: Conference Record of the IEEE Industry Applications Society Annual Meeting, Bd. 1. IEEE, 1. Okt. 1989, S. 486–492 (siehe S. 1100).
U. Baader, M. Depenbrock und G. Gierse. „Direct self control (DSC) of inverter-fed induction machine: A basis for speed control without speed measurement“. In: IEEE transactions on industry applications 28.3 (1992), S. 581–588 (siehe S. 1099 f.).
K. Bradley, A. Ferrah und G. Asher. „Analysis of speed measurement using FFT spectral estimation for mains or inverter driven induction motors“. In: International Conference on Electrical Machines (Icem’92). 1992, S. 923–927 (siehe S. 1142).
L. Ben-Brahim und A. Kawamura. „A fully digitized field-oriented controlled induction motor drive using only current sensors“. In: IEEE Transactions on Industrial Electronics 39.3 (1992), S. 241–249 (siehe S. 1099 f.).
L. Ben-Brahim und R. Kurosawa. „Identification of induction motor speed using neural networks“. In: Conference Record of the Power Conversion Conference-Yokohama 1993. IEEE. 1993, S. 689–694 (siehe S. 1138).
I. P. Brown und R. D. Lorenz. „Induction machine design methodology for self-sensing: Balancing saliencies and power conversion properties“. In: IEEE Transactions on Industry Applications 47.1 (2010), S. 79–87 (siehe S. 1182, 1185).
R. Blasco-Gimenez, G. Asher, M. Sumner u. a. „Field weakening at high and low speed for sensorless vector controlled induction motor drives“. In: Power Electronics and Variable Speed Drives, Conf. Publ. Sep. 1996, S. 258–261 (siehe S. 1122).
F. Briz, M. W. Degner, A. Diez und R. D. Lorenz. „Measuring, modeling, and decoupling of saturation-induced saliencies in carrier-signal injection-based sensorless AC drives“. In: IEEE Transactions on Industry Applications 37.5 (2001), S. 1356–1364 (siehe S. 683, 1182).
I. Bronstein, K. Semendjajew, G. Musiol und H. Mühlig. Taschenbuch der Mathematik. Nachdruck der 6., vollständig überarbeiteten und ergänzten Auflage von 2005,2006. Frankfurt a. M.: Wissenschaftlicher Verlag Harri Deutsch GmbH, 2006 (siehe S. 1144).
K. Brammer und G. Siffling. Kalman-Bucy-Filter: Deterministische Beobachtung und stochastische Filterung. Walter de Gruyter GmbH & Co KG, 2014 ((siehe S. 154, 1135).
H. Bausch, Z. Wnyan und K. Kanelis. „Tacholess torque control of induction machines based on the improved voltage flux model“. In: Proc. 2nd Chinese Int. Conf. Electric Machines (CICEM). 1995, S. 180–185 (siehe S. 1118).
S. Bolognani, M. Zigliotto und K. Unterkofler. „On-line parameter commissioning in sensorless PMSM drives“. In: ISIE’97 Proceeding of the IEEE International Symposium on Industrial Electronics. Bd. 2. IEEE. 1997, S. 480–484 ((siehe S. 1137).
C. Bonnano, L. Zhen und L. Xu. „A position sensorless induction machine drive for electric vehicle applications“. In: Proceedings of 1994 IEEE Workshop on Power Electronics in Transportation. IEEE. 1994, S. 67–72 (siehe S. 1100).
C. Bonanno, L. Zhen und L. Xu. „A direct field oriented induction machine drive with robust flux estimator for position sensorless control“. In: IAS’95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting. Bd. 1. IEEE. 1995, S. 166–173 (siehe S. 1100).
M. J. Corley und R. D. Lorenz. „Rotor position and velocity estimation for a salient-pole permanent magnet synchronous machine at standstill and high speeds“. In: IEEE Transactions on Industry Applications 34.4 (1998), S. 784–789 (siehe S. 1155, 1162, 1164).
R. M. Cuzner, R. Lorenz und D. Novotny. „Application of nonlinear observers for rotor position detection on an induction motor using machine voltages and currents“. In: Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting. IEEE. 1990, S. 416–421 (siehe S. 1142).
A. Consoli, G. Scarcella, G. Tutino und A. Testa. „Sensorless field oriented control using common mode currents“. In: Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No. 00CH37129) . Bd. 3. IEEE. 2000, S. 1866–1873 (siehe S. 1182).
A. Consoli, F. Russo, G. Scarcella und A. Testa. „Low-and zero-speed sensorless control of synchronous reluctance motors“. In: IEEE Transactions on Industry Applications 35.5 (1999), S. 1050–1057 (siehe S. 1182).
A. Consoli. „AC machine sensorless control techniques based on high frequency signal injection“. In: Proc. Rec. Int. Conf. on PEMC. Bd. 1. 2000, S. 98–103 (siehe S. 1182).
A. Consoli, G. Scarcella und A. Testa. „A new zero-frequency fluxposition detection approach for direct-field-oriented-control drives“. In: IEEE Transactions on Industry Applications 36.3 (2000), S. 797–804 (siehe S. 1182).
A. Consoli und A. Testa. „A New Zero Frequency Flux Position Detection Approach for Direct Field Oriented Control Drives“. In: IEEE Industry Applications Society Annual Meeting 1999, Conf. Proc.1999, S. 2290–2297 (siehe S. 1182).
M. Comanescu und L. Xu. „An improved flux observer based on PLL frequency estimator for sensorless vector control of induction motors“. In: IEEE Transactions on Industrial Electronics 53.1 (2006), S. 50–56 (siehe S. 1177).
T. Du und M. Brdys. „Shaft speed, load torque and rotor flux estimation of induction motor drive using an extended Luenberger observer“. In: 1993 Sixth International Conference on Electrical Machines and Drives (Conf. Publ. No. 376). IET. 1993, S. 179–184 (siehe S. 1100, 1128).
M. Degner. „Flux, Position, and Velocity Estimation in AC Machines Using Carrier Signal Injection“. Diss. University of Wisconsin, Madison, USA, 1998 (siehe S. 1182).
M. Depenbrock, C. Foerth, F. Hoffmann u. a. „Speed-sensorless stator-flux-oriented control of induction motor drives in traction“. In: Communications-Scientific Letters of the University of Zilina 2 (2001), S. 68–75 (siehe S. 1180).
M. Depenbrock, C. Foerth und S. Koch. „Speed sensorless control of induction motors at very low stator frequencies“. In: 8th European Power Electronic Conference (EPE). 1999 (siehe S. 1131, 1133, 1180).
M. Depenbrock, F. Hoffmann und S. Koch. „Speed sensorless high performance control for traction drives“. In: 7th EPE Conference. Bd. 1. 1997, S. 1418–1423 (siehe S. 562, 572, 576, 612, 1131, 1133).
M. W. Degner und R. D. Lorenz. „Using multiple saliencies for the estimation of flux, position, and velocity in AC machines“. In: IEEE Transactions on Industry Applications 34.5 (1998), S. 1097–1104 (siehe S. 1168, 1182).
F. De Belie und J. Melkebeek. „Seamless integration of a low-speed position estimator for IPMSM in a current-controlled voltage-source inverter“. In: 2010 First Symposium on Sensorless Control for Electrical Drives. IEEE. 2010, S. 50–55 (siehe S. 1159).
M. Depenbrock und V. Staudt. „Determination of the stator flux space vector of saturated AC machines“. In: ETZ-Archiv 12.11 (1990), S. 349–352 (siehe S. 1180).
S. Doki, S. Sangwongwanich und S. Okuma. „Implementation of speed-sensor-less field-oriented vector control using adaptive sliding observers“. In: Proceedings of the 1992 International Conference on Industrial Electronics, Control, Instrumentation, and Automation. IEEE. 1992, S. 453–458 (siehe S. 1118).
F. De Belie, T. Vyncke und J. Melkebeek. „Parameterless rotor position estimation in a direct-torque controlled salient-pole PMSM without using additional test signals“. In: The XIX International Conference on Electrical Machines-ICEM 2010. IEEE. 2010, S. 1–6 (siehe S. 1159).
A. Ferrah, K. Bradley und G. Asher. „Sensorless speed detection of inverter fed induction motors using rotor slot harmonics and fast Fourier transform“. In: PESC’92 Record. 23rd Annual IEEE Power Electronics Specialists Conference. IEEE. 1992, S. 279–286 (siehe S. 629, 1142).
D. Fodor, G. Griva und F. Profumo. „Neural network flux estimator for universal field oriented (UFO) controllers. ICEM’96“. In: International Conference on Elec. Mach. Bd. 3. 1996, S. 196–201 (siehe S. 1138).
T. Frenzke, F. Hoffmann und H. Langer. „Speed Sensorless Control of Traction Drives - Experiences on Vehicles“. In: 8th European Conf. on Power Electronics and Applications. 1999 (siehe S. 1131, 1133, 1180).
D. Fodor, F. Ionescu, D. Floricau u. a. „Neural networks applied for induction motor speed sensorless estimation“. In: 1995 Proceedings of the IEEE International Symposium on Industrial Electronics. Bd. 1. IEEE. 1995, S. 181–186 (siehe S. 1138, 1140).
C. Foerth. „Traktionsantrieb ohne Drehzahlgeber mit minimiertem Messaufwand“. Diss. Ruhr-Universität Bochum, 2001 (siehe S. 801, 1131, 1133, 1180).
O. Föllinger. Nichtlineare Regelungen 2: Harmonische Balance, Popow-und Kreiskriterium, Hyperstabilität, Synthese im Zustandsraum: mit 18 Übungsaufgaben mit Lösungen. Walter de Gruyter GmbH & Co KG, 2014 (siehe S. 190, 1108).
L. Garces. „Ein Verfahren zur Parameteranpassung bei der Drehzahlregelung der umrichtergespeisten Käfigläufermaschine“. Diss. TH Darmstadt, 1979 (siehe S. 1123).
C. Griva, F. Profumo, C. Ilas u. a. „A unitary approach to speed sensorless induction motor field oriented drives based on various model reference schemes“. In: IAS’96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting. Bd. 3. IEEE. 1996, S. 1594–1599 (siehe S. 1110–1113).
G. Guidi und H. Umida. „A novel stator resistance estimation method for speed-sensorless induction motor drives“. In: IEEE Transactions on Industry Applications 36.6 (2000), S. 1619–1627 (siehe S. 1179).
T. Hamajima, M. Hasegawa, S. Doki und S. Okuma. „Sensorless vector control of induction motor with stator resistance identification based on augmented error“. In: Proceedings of the Power Conversion Conference-Osaka 2002 (Cat. No. 02TH8579). Bd. 2. IEEE. 2002, S. 504–509 (siehe S. 1179).
L. Harnefors. „Speed estimation from noisy resolver signal“. In: Power Electronics and Variable Speed Drives, Conf. Publ.429. 1996, S. 279–282 (siehe S. 1137).
G. Henneberger. „Field oriented control of synchronous and asynchronous drives without mechanical sensors using a Kalman filter“. In: EPE Firenze. 1991, S. 664–671 (siehe S. 1118).
K. D. Hurst und T. G. Habetler. „Sensorless speed measurement using current harmonic spectral estimation in induction machine drives“. In: IEEE Transactions on Power Electronics11.1 (1996), S. 66–73 (siehe S. 1142).
J. Holtz, J. Jiang und H. Pan. „Identification of rotor position and speed of standard induction motors at low speed including zero stator frequency“. In: Proceedings of the IECON’97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No. 97CH36066). Bd. 2. IEEE. 1997, S. 971–976 (siehe S. 1142).
M. Hövermann und B. Orlik. „Feldorientierte Drehzahlregelung von Drehstrom-Asynchronmaschinen ohne Drehzahlsensor“. In: SPS 96, IPC 96, DRIVES 96, 7. Int. Fachmesse und Kongress f. Speicherprogrammierbare Steuerungen, Industrie-Pcs und Elektrische Antriebstechnik, Tagungsband, Sindelfingen . Nov. 1996 (siehe S. 1181).
M. Hövermann und B. Orlik. „Field oriented control of induction motor without speed sensor with control and correction for the flux angle“. In: PCIM ’97, Nürnberg, Germany, Proc. of the 31. Int. Intelligent Motion Conf. Juni 1997 (siehe S. 1181).
M. Hövermann und B. Orlik. „Sensorlose Drehzahlregung von Drehstrom-Asynchronmaschinen in Feldkoordinaten“. In: 43. IWK (Internat. Wissenschaftliches Kolloquium), Ilmenau, Germany, Band 4. Sep. 1998 (siehe S. 1181).
F. Hoffmann. „Drehgeberlos geregelte Induktionsmaschinen an IGBTPulsstromrichtern“. Diss. Ruhr-Universität Bochum, 1996 (siehe S. 572, 575 f., 1131, 1180).
J. Holtz. „Initial rotor polarity detection and sensorless control of PM synchronous machines“. In: Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting. Bd. 4. IEEE. 2006, S. 2040–2047 (siehe S. 1175).
J. Holtz. „Sensorless control of induction machines—With or without signal injection?“ In: IEEE Transactions on Industrial Electronics 53.1 (2006), S. 7–30 (siehe S. 1176).
J. Holtz und J. Quan. „Drift-and parameter-compensated flux estimator for persistent zero-stator-frequency operation of sensorlesscontrolled induction motors“. In: IEEE Transactions on Industry Applications 39.4 (2003), S. 1052–1060 (siehe S. 1177).
J.-I. Ha und S.-K. Sul. „Physical understanding of high frequency injection method to sensorless drives of an induction machine“. In: Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No. 00CH37129) . Bd. 3. IEEE. 2000, S. 1802–1808 (siehe S. 1182).
J.-I. Ha und S.-K. Sul. „Sensorless field orientation control of an induction machine by high frequency signal injection“. In: IAS’97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting. Bd. 1. IEEE. 1997, S. 426–432 (siehe S. 1182).
K. Hurst, T. Habetler, G. Griva und F. Profumo. „Speed sensorless field-oriented control of induction machines using current harmonic spectral estimation“. In: Proceedings of 1994 IEEE Industry Applications Society Annual Meeting. Bd. 1. IEEE. 1994, S. 601–607 (siehe S. 1142).
S. Ichikawa, M. Tomita, S. Doki und S. Okuma. „Sensorless Control of Synchronous Reluctance Motors Based on Extended EMF Models Considering Magnetic Saturation With Online Parameter Identification“. In: IEEE Transactions on Industry Applications 42.5 (2006), S. 1264–1274 (siehe S. 1182).
K. Ide, K. Hazama, T. Tsuji und R. Oguro. „Speed sensorless fieldoriented controlled IM with stator voltage error compensator“. In: IEEJ Transactions on Industry Applications 116.8 (1996), S. 835–843 (siehe S. 1129).
IEEE Transactions on Industrial Electronics. Bd. 53. 1. Feb. 2006 (siehe S. 1182).
IEEE Transactions on Industrial Electronics. Bd. 53. 2. Apr. 2006 (siehe S. 1182).
C. Ilas, G. Griva und F. Profumo. „Speed Sensorless Field Oriented Control Drives Using a Kalman Filter“. In: Conf. Rec. EDPE’94. 1994 (siehe S. 1136 f.).
K. Ide, J.-I. Ha und M. Sawamura. „A hybrid speed estimator of flux observer for induction motor drives“. In: IEEE Transactions on Industrial Electronics 53.1 (2006), S. 130–137 (siehe S. 1181).
M. Ishida und K. Iwata. „A new slip frequncy detector of an induction motor utilizing rotor slot harmonics“. In: IEEE Transactions on Industry Applications 3 (1984), S. 575–582 (siehe S. 1142).
M. Ishida und K. Iwata. „Steady-state characteristics of a torque and speed control system of an induction motor utilizing rotor slot harmonics for slip frequency sensing“. In: IEEE transactions on power electronics 3 (1987), S. 257–263 (siehe S. 1142).
M. Iwata, S. Ito und T. Ohno. „Speed sensorless field oriented control induction motor drive systems with load adaptive mechanism“. In: Conf. Rec. IPEC. 1995, S. 993–998 (siehe S. 1095 ff.).
C. Ilas und R. Magureanu. „DSP-Based sensorless direct field oriented control of induction motor drives“. In: Conf. Rec. PEMC. Bd. 2. 1996, S. 309–313 (siehe S. 1136).
C. Ilas, G. Papagheorghe und R. Magureanu. „Improved DSP for wide range speed sensorless induction motor drives“. In: Conf. Rec. ICEM. 1996, S. 230–235 (siehe S. 1126, 1131).
J. Jiang und J. Holtz. „High dynamic speed sensorless AC drive with on-line model parameter tuning for steady-state accuracy“. In: IEEE Transactions on Industrial electronics 44.2 (1997), S. 240–246 (siehe S. 1142).
P. Jansen und R. Lorenz. „Accuracy limitations of velocity and flux estimation in direct field oriented induction machines“. In: 1993 fifth European conference on power electronics and applications. IET. 1993, S. 312–318 (siehe S. 1116, 1121 f.).
P. L. Jansen und R. D. Lorenz. „Transducerless position and velocity estimation in induction and salient AC machines“. In: IEEE transactions on industry applications 31.2 (1995), S. 240–247 (siehe S. 1152, 1162, 1164).
R. Joetten und G. Maeder. „Control methods for good dynamic performance induction motor drives based on current and voltage as measured quantities“. In: IEEE Transactions on Industry Applications 3 (1983), S. 356–363 (siehe S. 1090, 1099 f., 1177).
R. Kalman und R. Bucy. „New Results in Linear Filtering and Prediction Theory1“. In: space 15 (1961), S. 150–155 (siehe S. 1124).
S. Kim, Y.-C. Kwon, S.-K. Sul u. a. „Position sensorless operation of IPMSM with near PWM switching frequency signal injection“. In: 8th International Conference on Power Electronics-ECCE Asia. IEEE. 2011, S. 1660–1665 (siehe S. 1159).
A. Kasprowicz, M. Kazmierkowski und S. Kanoza. „Speed sensorless direct torque vector control of dc link resonant inverter-fed induction motor drive“. In: Proceedings of IEEE International Symposium on Industrial Electronics. Bd. 1. IEEE. 1996, S. 186–189 (siehe S. 1100).
H. Kubota und K. Matsuse. „Flux observer of induction motor with parameter adaption for wide speed range motor drives“. In: Proc. IPEC-Tokyo. 1990, S. 1213–1218 (siehe S. 1127, 1177, 1180).
H. Kubota und K. Matsuse. „Robust field oriented induction motor drives based on disturbance torque estimation without rotational transducers“. In: Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting. IEEE. 1992, S. 558–562 (siehe S. 1127, 1177, 1180).
H. Kubota und K. Matsuse. „Simultaneous estimation of speed and rotor resistance of field oriented induction motor without rotational transducers“. In: Conference Record of the Power Conversion Conference-Yokohama 1993. IEEE. 1993, S. 473–477 (siehe S. 1127 f., 1177, 1180).
H. Kubota und K. Matsuse. „Speed sensorless field oriented control of induction motor with rotor resistance adaptation“. In: Conference record of the 1993 IEEE industry applications conference twenty-eighth IAS annual meeting. IEEE. 1993, S. 414–418 (siehe S. 1127 f., 1177, 1180).
H. Kubota und K. Matsuse. „Speed sensorless field oriented control of induction machines using flux observer“. In: Proceedings of IECON’94-20th Annual Conference of IEEE Industrial Electronics. Bd. 3. IEEE. 1994, S. 1611–1615 (siehe S. 1127, 1177, 1180).
H. Kubota und K. Matsuse. „The improvement of performance at low speed by offset compensation of stator voltage in sensorless vector controlled induction machines“. In: IAS’96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting. Bd. 1. IEEE. 1996, S. 257–261 (siehe S. 1127, 1177, 1180).
H. Kubota, K. Matsuse und T. Nakano. „New adaptive flux observer of induction motor for wide speed range motor drives“. In: IECON’90: 16th Annual Conference of IEEE Industrial Electronics Society. IEEE. 1990, S. 921–926 (siehe S. 1127, 1177, 1180).
H. Kubota, K. Matsuse und T. Nakano. „DSP-based speed adaptive flux observer of induction motor“. In: IEEE transactions on industry applications 29.2 (1993), S. 344–348 (siehe S. 1099, 1118, 1125 ff., 1131, 1177, 1179 f.).
S. Koch. Beiträge zur Regelung von Induktionsmaschinen ohne Drehgeber. VDI-Verlag, 1998 (siehe S. 1131, 1133, 1180).
Z. Krzeminski. „Speed and rotor resistance estimation in observer system of induction motor“. In: EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS. Bd. 3. 1992, S. 538–538 (siehe S. 1131).
Y.-R. Kim, S.-K. Sul und M.-H. Park. „Speed sensorless vector control of an induction motor using an extended Kalman filter“. In: Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting. IEEE. 1992, S. 594–599 (siehe S. 1137).
H. Kubota und Y. Tamura. „Stator resistance estimation for sensorless induction motor drives under regenerating condition“. In: IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02. Bd. 1. IEEE. 2002, S. 426–430 (siehe S. 1179).
T. Kanmachi und I. Takahashi. „Sensor-less speed control of an induction motor with no influence of secondary resistance variation“. In: Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting. IEEE. 1993, S. 408–413 (siehe S. 1103 f.).
T. Kanmachi und I. Takahashi. „A secondary resistance calculation method for sensor-less speed control of an induction motor“. In: IPECYokohama. Bd. 95. 1995, S. 1671–1676 (siehe S. 1100).
H. Kubota, I. Sato, Y. Tamura u. a. „Regenerating-mode low-speed operation of sensorless induction motor drive with adaptive observer“. In: IEEE Transactions on Industry Applications 38.4 (2002), S. 1081–1086 (siehe S. 1177).
S.-u. Kim, I. Yang und Y. Kim. „Speed Estimation of Vector Controlled Induction Motor without Speed Sensor by Reduced-Order EKF“. In: IPEC-Yokohama. Bd. 95. 1995, S. 1665–1670 (siehe S. 1137).
P. Landsmann, D. Paulus, P. Stolze und R. Kennel. „Saliency based encoderless predictive torque control without signal injection for a reluctance synchronous machine“. In: Proceedings of 14th International Power Electronics and Motion Control Conference EPE-PEMC 2010. IEEE. 2010, S1–10 (siehe S. 1159).
C. Lascu, I. Boldea und F. Blaabjerg. „Very low speed sensorless variable structure control of induction machine drives without signal injection“. In: IEEE International Electric Machines and Drives Conference, 2003. IEMDC’03. Bd. 3. IEEE. 2003, S. 1395–1401 (siehe S. 1177).
N. Limsuwan, T. Fukushige, K. Akatsu und R. D. Lorenz. „Design methodology for variable-flux, flux-intensifying interior permanent magnet machines for an electric-vehicle-class inverter rating“. In: 2013 IEEE Energy Conversion Congress and Exposition. IEEE. 2013, S. 1547–1554 (siehe S. 1184).
P. Landsmann und R. Kennel. „Saliency-based sensorless predictive torque control with reduced torque ripple“. In: IEEE Transactions on Power Electronics 27.10 (2012), S. 4311–4320 (siehe S. 1159 ff.).
M. Linke, R. Kennel und J. Holtz. „Sensorless position control of permanent magnet synchronous machines without limitation at zero speed“. In: IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02. Bd. 1. IEEE. 2002, S. 674–679 (siehe S. 1155, 1162).
N. Limsuwan, T. Kato und R. D. Lorenz. „Concurrent design of interior-permanent-magnet machines for self-sensing and power conversion“. In: IEEE Transactions on Industry Applications 48.6 (2012), S. 2157–2164 (siehe S. 1184).
R. D. Lorenz. „Sensorless drive control methods for stable, high performance, zero speed operation“. In: International Conference on Power Electronics and Motion Control-EPE-PEMC, Kosice. Bd. 1. 2000, S. 1–11 (siehe S. 1182).
R. D. Lorenz. „What limits the broad use of self-sensing, i. e. Using the Motor Itself as the Sensor“. In: SLED/PRECEDE. Okt. 2013 (siehe S. 1183).
P. Landsmann, D. Paulus und R. Kennel. „Online identification of load angle compensation for anisotropy based sensorless control“. In: 2011 Symposium on Sensorless Control for Electrical Drives. IEEE. 2011, S. 80–84 (siehe S. 1167).
G. Ludyk. Theoretische Regelungstechnik 2: Zustandsrekonstruktion, optimale und nichtlineare Regelungssysteme. Springer-Verlag, 2013 (siehe S. 789, 1134 f.).
D. Luenberger. „Observing the state of linear system“. In: IEEE Trans. on Mil. Electron. 8 (1964), S. 74–80 (siehe S. 151, 1124).
D. Luenberger. „Observers for multivariable systems“. In: IEEE Transactions on Automatic Control 11.2 (1966), S. 190–197 (siehe S. 151, 1124).
D. Luenberger. „An introduction to observers“. In: IEEE Transactions on Automatic Control 16.6 (1971), S. 596–602 (siehe S. 151, 1124).
K. Minami, M. Vélez-Reyes, D. Elten u. a. „Multi-stage speed and parameter estimation for induction machines“. In: IEEE Power Electronics Specialist’s Conference, Boston MA. 1991 (siehe S. 1116).
H.-S. Mok, J.-S. Kim, Y.-R. Kim und M.-H. Park. „A stator flux oriented speed control of induction machine without speed sensor“. In: Proc. 4th European Conf. Power Electronics and Applications. Bd. 4. 1991, S. 678–682 (siehe S. 1106 f.).
K. S. Narendra und A. M. Annaswamy. Stable adaptive systems. Prentice Hall, 1989 (siehe S. 1179).
C. Nitayotan und S. Sangwongwanich. „A filtered back EMF based speed-sensorless induction motor drive“. In: Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No. 01CH37248). Bd. 2. IEEE. 2001, S. 1224–1231 (siehe S. 1179 f.).
K. Ohyama, G. M. Asher und M. Sumner. „Comparative analysis of experimental performance and stability of sensorless induction motor drives“. In: IEEE Transactions on Industrial Electronics 53.1 (2006), S. 178–186 (siehe S. 1181).
T. Ohtani. „A new method of torque control free from motor parameter variation in induction motor drives“. In: Conf. Rec. IEEE IAS. 1986, S. 203–209 (siehe S. 1100, 1177).
T. Ohtani. „Reduction of motor parameter sensitivity in vectorcontrolled induction motor without shaft encoder“. In: IEEJ Transac tions on Industry Applications 110.5 (1990), S. 497–505 (siehe S. 1100, 1177).
T. Ohtani, N. Takada und K. Tanaka. „Vector control of induction motor without shaft encoder“. In: Conference Record of the IEEE Industry Applications Society Annual Meeting, San Diego, CA, USA. San Diego, CA, USA: IEEE, 1989, S. 500–507 (siehe S. 1100, 1177).
T. Ohtani, N. Takada und K. Tanaka. „Vector control of induction motor without shaft encoder“. In: IEEE Transactions on Industry Applications 28.1 (1992), S. 157–164 (siehe S. 1100, 1177).
T. Ourth, V. Nguyen Phuoc, M. Pietrzak-David und B. De Fornel. „Sensorless speed control of induction motor drives using observer based vector control“. In: Proc. ICEM’92. 1992, S. 858–862 (siehe S. 1131).
T. Ourth, F. Crampe, V. Nguyen Phuoc u. a. „Implementation of sensorless speed vector control“. In: Conf. Rec. ICEM. 1994, S. 318–323 (siehe S. 1131).
M. Papageōrgiu. Optimierung: statische, dynamische, stochastische Verfahren für die Anwendung; mit 15 Tabellen, 147 Beispielen und 206 Übungsaufgaben. Oldenbourg, 1996 (siehe S. 154, 976, 1109, 1124, 1135).
D. Paulus, P. Landsmann, S. Kuehl und R. Kennel. „Arbitrary injection for permanent magnet synchronous machines with multiple saliencies“. In: 2013 IEEE Energy Conversion Congress and Exposition. IEEE. 2013, S. 511–517 (siehe S. 1170, 1174).
F.-Z. Peng und T. Fukao. „Robust speed identification for speedsensorless vector control of induction motors“. In: IEEE Transactions on Industry Applications 30.5 (1994), S. 1234–1240 (siehe S. 1123).
F.-Z. Peng, T. Fukao und J.-S. Lai. „Low-speed performance of robust speed identification using instantaneous reactive power for tacholess vector control of induction motors“. In: Proceedings of 1994 IEEE Industry Applications Society Annual Meeting. Bd. 1. IEEE. 1994, S. 509–514 (siehe S. 1119 f., 1123).
D. Paulus, P. Landsmann und R. Kennel. „Sensorless field-oriented control for permanent magnet synchronous machines with an arbitrary injection scheme and direct angle calculation“. In: 2011 Symposium on Sensorless Control for Electrical Drives. IEEE. 2011, S. 41–46 (siehe S. 1159).
D. Paulus, P. Landsmann und R. Kennel. „Saliency based sensorless field-oriented control for permanent magnet synchronous machines in the whole speed range“. In: 3rd IEEE International Symposium on Sensorless Control for Electrical Drives (SLED 2012). IEEE. 2012, S. 1–6 (siehe S. 1159 ff.).
V. M. Popov. Hyperstability of control systems. Springer-Verlag, 1973 (siehe S. 1110).
F. Profumo, G. Griva, M. Pastorelli und J. Moreira. „Universal field oriented controller with indirect speed sensing based on the saturation third harmonic voltage“. In: Proceedings of IEEE Power Electronics Specialist Conference-PESC’93. IEEE. 1993, S. 948–955 (siehe S. 1142).
M. Rashed, F. Stronach und P. Vas. „A new stable MRAS-based speed and stator resistance estimators for sensorless vector control induction motor drive at low speeds“. In: 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003. Bd. 2. IEEE. 2003, S. 1181–1188 (siehe S. 1179).
D. Schröder. Elektrische Antriebe — Grundlagen: Mit durchgerechneten Übungs- und Prüfungsaufgaben. 2. Aufl. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000 (siehe S. 1, 317 f., 345, 403, 405, 424, 432 f., 438, 459, 462, 467, 559, 573, 829, 873, 876, 881, 884, 964, 973, 975, 1081, 1084, 1115, 1178, 1201, 1208, 1213, 1270, 1377).
D. Schröder. Intelligent Observer and Control Design for Nonlinear Systems. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000 (siehe S. 1138, 1231, 1271, 1280, 1368, 1391, 1423 f.).
D. Schröder. Elektrische Antriebe — Regelung von Antriebssystemen. 2. Aufl. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001 (siehe S. 559, 1178).
D. Schröder. Leistungselektronische Bauelemente. Berlin, Heidelberg: Springer Berlin Heidelberg, 2006 (siehe S. 341, 1178).
D. Schröder. Elektrische Antriebe — Grundlagen: Mit durchgerechneten Übungs- und Prüfungsaufgaben. 3. Aufl. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007 (siehe S. 1, 317 f., 345, 403, 405, 425, 432 f., 438, 459, 462, 467, 559, 573, 829, 873, 876, 881, 884, 964, 973, 975, 1081, 1084, 1115, 1178, 1201, 1208, 1213, 1270, 1377, 1510).
D. Schröder. Leistungselektronische Schaltungen: Funktion, Auslegung und Anwendung. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008 (siehe S. 303, 341, 595, 600, 602, 780, 873, 881, 884, 1178).
D. Schröder. Elektrische Antriebe - Grundlagen: Mit durchgerechneten Übungs- und Prüfungsaufgaben. 4. Aufl. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009 (siehe S. 1, 317 f., 345, 403, 405, 425, 432 f., 439, 459, 462, 467, 559, 573, 829, 873, 876, 881, 884, 964, 973, 975, 1081, 1084, 1115, 1178, 1201, 1208, 1213, 1270, 1377).).
D. Schröder. Elektrische Antriebe - Regelung von Antriebssystemen. 3. Aufl. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009 (siehe S. 559, 914, 937, 1012, 1015, 1178).
Schröder. Intelligente Verfahren: Identifikation und Regelung nichtlinearer Systeme. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010 (siehe S. 155, 1140, 1178 f., 1271, 1273, 1278 f., 1316 ff., 1342 f., 1352, 1354, 1524).
D. Schröder. Leistungselektronische Schaltungen: Funktion, Auslegung und Anwendung. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012 (siehe S. 303, 341, 595, 600, 602, 780, 873, 881, 884, 1178, 1528, 1572).
D. Schröder. Elektrische Antriebe - Grundlagen: Mit durchgerechneten Übungs- und Prüfungsaufgaben. 5. Aufl. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013 (siehe S. 1, 317 f., 345, 403, 405, 425, 432 f., 439, 459, 462, 467, 559, 573, 829, 873, 876, 881, 884, 964, 973, 975, 1081, 1084, 1115, 1178, 1201, 1208, 1213, 1270, 1377, 1523).
D. Schröder. Elektrische Antriebe - Regelung von Antriebssystemen. 4. Aufl. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015 (siehe S. 559, 914, 927 f., 1178).
M. Schroedl. „Detection of the rotor position of a permanent magnet synchronous machine at standstill“. In: Int. Conf. on Electrical Machines (ICEM). 1988, S. 195–197 (siehe S. 1149, 1162, 1164).
C. Schauder. „Adaptive speed identification for vector control of induction motors without rotational transducers“. In: Conference Record of the IEEE Industry Applications Society Annual Meeting, San Diego, CA, USA. San Diego, CA, USA: IEEE, Okt. 1989, S. 493–499 (siehe S. 1116, 1118, 1120 f.).
C. Schauder. „Adaptive speed identification for vector control of induction motors without rotational transducers“. In: IEEE Transactions on Industry Applications 28 (5 1992), S. 1054–1061 (siehe S. 1116, 1118, 1120 f.).
D. Schröder. Elektrische Antriebe 1: Grundlagen. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994 (siehe S. 1, 317 f., 345, 403, 405, 424, 432 f., 438, 459, 462, 467, 573, 829, 873, 876, 881, 884, 964, 973, 975, 1081, 1084, 1115, 1178, 1201, 1208, 1213, 1270, 1377).
D. Schröder. Elektrische Antriebe 2: Regelung von Antrieben. Berlin, Heidelberg: Springer Berlin Heidelberg, 1995 siehe S. 559, 1178).
D. Schröder. Elektrische Antriebe 3: Leistungselektronische Bauelemente. Berlin, Heidelberg: Springer Berlin Heidelberg, 1996 (siehe S. 341, 1178).
D. Schröder. Elektrische Antriebe 4: Leistungselektronische Schaltungen. Berlin, Heidelberg: Springer Berlin Heidelberg, 1998 (siehe S. 303, 341, 595, 600, 602, 780, 873, 881, 884, 1178).
S. Shirsavar, M. McCulloch und C. Guy. „Speed sensorless vector control of induction motors with parameter estimation“. In: IAS’96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting. Bd. 1. IEEE. 1996, S. 262–269 ((siehe S. 1105 f.).
M. Saejia und S. Sangwongwanich. „Averaging analysis approach for stability analysis of speed-sensorless induction motor drives with stator resistance estimation“. In: IEEE Transactions on Industrial Electronics 53.1 (2006), S. 162–177 (siehe S. 1179).
S. Sangwongwanich und S. Suwankawin. „A speed-sensorless IM drive with modified decoupling control“. In: Proceedings of Power Conversion Conference-PCC’97. Bd. 1. IEEE. 1997, S. 85–90 (siehe S. 1180).
S. Suwankawin und S. Sangwongwanich. „Stability analysis and design guidelines for a speed-sensorless induction motor drive“. In: Proceedings of Power Conversion Conference-PCC’97. Bd. 2. IEEE. 1997, S. 583–588 (siehe S. 1180).
A. Steimel. Elektrische Triebfahrzeuge und ihre Energieversorgung: Grundlagen und Praxis. Oldenbourg Industrieverlag, 2006 (siehe S. 782, 788, 799 ff., 817, 1180).
H. Sugimoto. „One improving measures of stability in regeneration operation of speed sensorless vector control induction motor system using adaptive observer of secondary magnetic flux“. In: Proc. IPECTokyo, 2000. 2000 (siehe S. 1179).
K. Talbot, C. Kleinhans, G. Diana und R. Harley. „Speed sensorless field oriented control of a csi-fed induction motor by a transputer based digital controller“. In: Proceedings of PESC’95-Power Electronics Specialist Conference. Bd. 2. IEEE. 1995, S. 785–791 (siehe S. 1096, 1098).
H. Tajima, G. Guidi und H. Umida. „Consideration about problems and solutions of speed estimation method and parameter tuning for speed sensorless vector control of induction motor drives“. In: Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No. 00CH37129). Bd. 3. IEEE. 2000, S. 1787–1793 (siehe S. 1128, 1131, 1179).
H. Tajima und Y. Hori. „Speed sensorless field-orientation control of the induction machine“. In: IEEE Transactions on Industry Applications29.1 (1993), S. 175–180 (siehe S. 1118, 1120).
Y.-Y. Tzou, W.-A. Lee und S.-Y. Lin. „Dual-DSP sensorless speed control of an induction motor with adaptive voltage compensation“. In: PESC Record. 27th Annual IEEE Power Electronics Specialists Conference. Bd. 1. IEEE. 1996, S. 351–357 (siehe S. 1100).
M. Tsuji, S. Chen, K. Izumi und E. Yamada. „A sensorless vector control system for induction motors using q-axis flux with stator resistance identification“. In: IEEE Transactions on Industrial Electronics 48.1 (2001), S. 185–194 (siehe S. 1179).
G. C. Verghese und S. R. Sanders. „Observers for faster flux estimation in induction machines“. In: 1985 IEEE Power Electronics Specialists Conference. IEEE. 1985, S. 751–760 (siehe S. 1124).
M. Weidauer. „Drehgeberlose Regelung umrichtergespeister Induktionsmaschinen in der Traktion“. Diss. Ruhr-Universität Bochum, 1999 (siehe S. 1131, 1133 f., 1180).
K. Wiedmann und A. Mertens. „Self-sensing control of PM synchronous machines including online system identification based on a novel MRAS approach“. In: 3rd IEEE International Symposium on Sensorless Control for Electrical Drives (SLED 2012). IEEE. 2012, S. 1–8 (siehe S. 1167).
S. Wu, D. D. Reigosa, Y. Shibukawa u. a. „Interior permanent-magnet synchronous motor design for improving self-sensing performance at very low speed“. In: IEEE Transactions on Industry Applications 45.6 (2009), S. 1939–1946 (siehe S. 1184).
S.-C. Yang, T. Suzuki, R. D. Lorenz und T. M. Jahns. „Surfacepermanent-magnet synchronous machine design for saliency-tracking self-sensing position estimation at zero and low speeds“. In: IEEE Transactions on Industry Applications 47.5 (2011), S. 2103–2116 (siehe S. 1184).
G. Yang und T.-H. Chin. „Adaptive speed identification scheme for vector controlled speed sensor-less inverter-induction motor drive“. In: Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting. IEEE. 1991, S. 404–408 (siehe S. 1116, 1179).
D. Zinger, F. Profumo, T. Lipo und D. Novotny. „A direct field oriented controller for induction motor drives using tapped stator windings“. In: IEEE Power Electronics Specialists Conference 1988. 1988, S. 855–861 (siehe S. 1119, 1142).
D. Zinger, T. Lipo und D. Novotny. „Using induction motor stator windings to extract speed information“. In: Conference Record of the IEEE Industry Applications Society Annual Meeting, IEEE. 1989, S. 213–218 (siehe S. 1142).
L. Zhen und L. Xu. „A mutual MRAS identification scheme for position sensorless field orientation control of induction machines“. In: IAS’95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting. Bd. 1. IEEE. 1995, S. 159–165 (siehe S. 1119).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer-Verlag GmbH Deutschland, ein Teil von Springer Nature
About this chapter
Cite this chapter
Schröder, D., Böcker, J. (2021). Drehgeberlose Regelung von Drehfeldmaschinen. In: Schröder, D., Böcker, J. (eds) Elektrische Antriebe – Regelung von Antriebssystemen. Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-62700-6_7
Download citation
DOI: https://doi.org/10.1007/978-3-662-62700-6_7
Published:
Publisher Name: Springer Vieweg, Berlin, Heidelberg
Print ISBN: 978-3-662-62699-3
Online ISBN: 978-3-662-62700-6
eBook Packages: Computer Science and Engineering (German Language)