Zusammenfassung
Dies ist ein Kapitel der 12. Auflage des VDI-Wärmeatlas
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
Literatur
Steinhagen, R., Müller-Steinhagen, H.M., Manni, K.: Fouling problems and fouling costs in New Zealand industries. Heat Transfer Eng. 14, 19–30 (1993)
Steinhagen, R., Müller-Steinhagen, H.M., Maani, K.: Heat Exchanger Applications, Fouling Problems and Fouling Costs in New Zealand Industries. Ministry of Commerce Report RD8829, S. 1–116 (1990)
Garrett-Price, B.A., et al.: Fouling of Heat Exchangers – Characteristics, Costs, Prevention, Control and Removal. Noyes Publications, Park Ridge (1985)
TEMA: Standards of the Tubular Exchanger Manufacturers Association, 6. Aufl. Tubular Exchanger Manufacturers Association, New York (1978)
Pritchard, A.M.: The economics of fouling. Publ. In: Melo, L.F., Bott, T.R., Bernardo, C.A. (Hrsg.) Fouling Science and Technology. NATO ASI Series E, Bd. 145. Kluwer Academic Publishers, Boston, USA (1987)
Bansal, B., Chen, X.D., Müller-Steinhagen, H.: Effect of suspended particles on calcium sulphate fouling in plate heat exchangers. ASME J. Heat Transfer 119, 568–574 (1997)
Epstein, N.: Fouling in heat exchangers. Publ. In: Taborek, J., Hewitt, G. (Hrsg.) Heat Exchanger Theory and Practice. McGraw-Hill, New York, USA (1983)
Blöchl, R., Müller-Steinhagen, H.M.: Influence of particle size and particle/liquid combination on particulate fouling in heat exchangers. Can. J. Chem. Eng. 68(4), 585–591 (1990)
Müller-Steinhagen, H.: Modellierung der Ablagerungsbildung in Wärmeübertragern – Vom Laborversuch zur Produktionsanlage. Berichte zur Energie- und Verfahrenstechnik Heft 20.1 (2000)
Taborek, J.: Private Communications (1987)
Knudsen, J.: Conquer cooling-water fouling. Chem. Eng. Prog. 91, 42–48 (1991)
Martin, H.: Wärmeübertrager. Georg Thieme Verlag, Stuttgart (1988)
Thackery, P.A.: The cost of fouling in heat exchanger plant. Effluent Water Treat. J. 20(3): 112–115. (1980)
Chenoweth, J.M.: General design of heat exchangers for fouling conditions. In: Proceedings of the NATO Advanced Study Institute on Advances in Fouling Science and Technology, Alvor (1987)
Woods, D.R., et al.: Evaluation of capital cost data: Heat exchangers, Can. J. Chem. Eng. 54, 469 (1976)
Sart, P., Eimer, K.: Control of Scaling or Fouling effects in Cooling Water System for Improvement of Heat Exchanger Efficiency. International Meeting on Industrial Heat Exchangers and Heat Recovery, Liege (1979)
Hewitt, G., Müller-Steinhagen, H.: Heat Exchanger Fouling in Crude Oil Distillation Units. ESDU Data Item 00016, S. 1–80 (2000)
Müller-Steinhagen, H.: Heat Exchanger Fouling – Mitigation and Cleaning Technologies, Bd. 1. PUBLICO Publications, Essen ISBN 3-934736-00-9 (2000)
Müller-Steinhagen, H.: Wärmeübertrager-Reinigungssysteme, Bd. 1. PUBLICO Publications, Essen ISBN 3-934736-02-5 (2001)
Müller-Steinhagen, H., Zettler, H.: Heat Exchanger Fouling – Mitigation and Cleaning Technologies, Bd. 2. PUBLICO Publications, Essen ISBN 3-934736-20-3 (2011)
Palen, J.: Shell and Tube Reboilers. Heat Exchanger Design Handbook, Section 3.7.8. Hemisphere Publishing Corp, Philadelphia (1983)
Bennett, C.A., Kistler, R.S., Lestina, T.G., King, D.G.: Improving heat exchanger designs. Chem. Eng. Prog. 103(4), 40–45 (2007)
Aguirre, F.J.: Reviewing the use of fouling factors in heat exchanger design. http://www.ChemicalProcessing.com (2006)
Bennett, C.A.: Using a non-traditional approach to account for crude oil fouling in heat exchangers. http://www.ChemicalProcessing.com. Zugegriffen am 30.09.2005
Nesta, J.M., Bennett, C.A.: Fouling mitigation by design. The 6th International Conference on Petroleum Phase Behavior and Fouling, Amsterdam, The Netherlands, 19–23 June 2005
Nesta, J., Bennett, C.A.: Reduce fouling in shell-and-tube heat exchangers. Hydrocarb. Process 83(7), 77–82 (2004)
Solano, J., Garcia, A., Vicente, P., Viedma, A.: Performance evaluation of zero-fouling reciprocating scraped surface heat exchanger. In: Proceedings of the International Conference on Heat Exchanger Fouling and Cleaning, Schladming (2009)
Klaren, D.G.: Fluid Bed Heat Exchanger. CPP Edition Europe (1987)
TUBEC Tubes.: AST, Avesta Sandvik Tube AB, Helmond
Hewitt, G., Müller-Steinhagen, H.: Fouling in Cooling Water Systems Using Seawater. ESDU Data Item 03004, S. 1–100. International Ltd., London (2003)
Knudsen, J.G.: Fouling in heat exchangers. In: Heat Exchanger Design Handbook. Hemisphere Publishing Corporation, Washington, DC (1983)
Branch, C.A., Müller-Steinhagen, H.: Fouling during heat transfer to Kraft Pulp Black liquor. Part I: experimental results. Appita J. 48(1), 45–50 (1995)
Curran International – www.curranintl.com
Bornhorst, A., Zhao, Q., Müller-Steinhagen, H.: Reduction of scale formation by ion implantation and magnetron sputtering on heat transfer surfaces. Heat Transfer Eng. 20(2), 6–14 (1999)
Müller-Steinhagen, H., Zhao, Q., Helalizadeh, A., Ren, X.G.: The effect of surface properties on CaSO4 scale formation during convective heat transfer and subcooled flow boiling. Can. J. Chem. Eng. 78, 12–20 (2000)
Förster, M., Augustin, W., Bohnet, M.: Influence of the adhesion force crystal/heat exchanger surface on fouling mitigation. Chem. Eng. Process 38, 449–461 (1999)
Zhao, Q., Müller-Steinhagen, H.: Intermolecular and adhesion forces of deposits on modified heat transfer surfaces. In: Proceedings of UEFC on Heat Exchanger Fouling, Davos, Session II (2001)
Zhao, Q., Liu, Y., Müller-Steinhagen, H., Liu, G.: Graded Ni-P-PTFE coatings and their potential applications. Surf. Coat. Technol. 155, 279–284 (2002)
Paikert, P.: Verschmutzung von Kondensatoren und Kühltürmen, Chemie Ingenieur Technik, Volume 58 (Nr. 9), S. 709–715, Weinheim, (1986)
Gilmour, C.H.: No fooling – no fouling. Chem. Eng. Prog. 61(7), 49–54 (1965)
Kral, D., Stehlik, P., van der Ploeg, H.J., Master, B.I.: Helical Baffles in shell and tube heat exchangers, Part I: experimental verification. Heat Transfer Eng. 17(1), 93–101 (1996)
EMbaffle B.V., A Major Advance in Heat Exchanger Technology, http://embaffle.com
Butterworth, D., Guy, A.R., Welkey, J.J.: Design and Application of Twisted-Tube Exchangers. Brown Fintube UK (1998)
Moore, J.A.: Fintubes Foil Fouling for Scaling Services. Chemical Processing (1980)
Sheikholeslami, R., Watkinson, A.P.: Scaling of plain and externally finned heat exchanger tubes. J. Heat Transf. 108, 147–152 (1986)
Müller-Steinhagen, H.: Fouling of Extended Surface Heat Exchangers. UEF Conference on Compact Heat Exchangers, Davos (2001)
Klaren, D.G.: Fluid Bed Heat Exchanger. CPP Edition Europe (1987)
Kollbach, J., Dahm, W., Rautenbach, R.: Continuous cleaning of heat exchanger with recirculating fluidized bed. Heat Transf. Eng. 8(4), 26–32 (1987)
Jamialahmadi, M., Malayeri, M., Müller-Steinhagen, H.: Heat transfer to liquid-solid fluidized beds. Can. J. Chem. Eng. 73(4), 444–455 (1995)
Cooper, A., Suitor, J.W., Usher, J.D.: Cooling water fouling in plate heat exchangers. Heat Transf. Eng. 1(3), 50–55 (1980)
Novak, L.: Comparison of the rhine river and the Öresund sea water fouling and its removal by chlorination. J. Heat Transf. 104, 663–670 (1982)
Zettler, H.U., Weiss, M., Zhao, Q., Müller-Steinhagen, H.: Influence of surface properties/characteristics on fouling in plate heat exchangers. Heat Transf. Eng. 26, 3–17 (2005)
Delplace, F., Leuliet, J.C., Bott, T.R.: Influence of plate geometry on fouling of plate heat exchangers by whey protein solutions. In: Panchal, C.B., Bott, T.R., Somerscales, E.F.C., Toyama, S. (Hrsg.) Fouling Mitigation of Industrial Heat-Exchange Equipment, S. 565–576. Begell Hse. Inc. Danbury (1997)
Masri, M.A., Cliffe, K.R.: Investigation into the fouling of a plate and frame heat exchanger. In: Panchal, C.B., Bott, T.R., Somerscales, E.F.C., Toyama, S. (Hrsg.) Fouling Mitigation of Industrial Heat-Exchange Equipment, S. 549–561. Begell Hse. Inc. Danbury (1997)
Pritchard, A.M., Clarke, R.H., de Block, M.X.: Fouling of small passages in compact heat exchangers. In: Bott, T.R., et al., (Hrsg.) Fouling Mechanisms: Theoretical and Practical Aspects. Eurotherm Seminar 23, S. 47–56. Grenoble (1992)
Kew, P.: An Investigation into Fouling of a Printed Circuit Heat Exchanger. Future Practice Report 13, Energy Efficiency Enquiries Bureau, Harwell (1991)
Coulson, J.M., Richardson, J.F., Sinnott, R.K.: Chemical Engineering, Bd. 6. Pergamon Press, Oxford (1985)
Drew Chemical Corporation.: Principles of Industrial Water Treatment, 1. Aufl., S. 99–103. Boonton (1977)
Nalco Chemical Comp.: Nalco Water Handbook, 1. Aufl. McGraw-Hill, New York (1979)
DUBBEL.: Taschenbuch für den Maschinenbau, Bd. 2, 13. Aufl., S. 87–94. (1974)
Müller-Steinhagen, H.: Cooling water fouling in heat exchangers. Adv. Heat Tran. 33, 415–496 (1999)
Harris, A., Marshall, A.: The Evaluation of Scale Control Additives. Conference on Progress in the Prevention of Fouling in Industrial Plant. University of Nottingham (1981)
Krisher, A.S.: Raw Water Treatment in the CPI. Chemical Engineering, S. 79–98 (1978)
Watkinson, A.P.: Critical review of organic fluid fouling: Final Report No. ANL/CNSV-TM-208 Argonne National Laboratory, III. Illinois (1988)
Gillies, W.V.: Fouling and its control by chemical additives in hydrocarbon streams. In: Proceedings of the Institute of Corrosion Science and Technology, and Institute of Chemical Engineering Fouling Conferences. University of Surrey, Guildford (1979)
Mayo, F.R., Miller, A.A.: The oxidation of unsaturated compounds; the oxidation of Styrene. J. Am. Chem. Soc. 78, 1017–1022 (1956)
Mayo, F.R., Miller, A.A.: The oxidation of unsaturated compounds; reaction of Styrene Peroxide. J. Am. Chem. Soc. 78, 1023–1034 (1956)
Mayo, F.R., Miller, A.A., Russel, G.A.: The oxidation of unsaturated compounds. J. Am. Chem. Soc. 80, 2500–2507 (1958)
Mayo, F.R.: The oxidation of unsaturated compounds; the effect of oxygen pressure on the oxidation of Styrene. J. Am. Chem. Soc. 80, 2465–2480 (1958)
Mayo, F.R.: Gum and deposit formation from jet turbine and diesel fuels at 130 °C. Ind. Eng. Chem. Prod. Res. Dev. 25, 333–348 (1986)
Mayo, F.R., Stavinoha, L.L., Lee, G.H.: Source of jet fuel thermal oxidation tester deposits from an oxidized JP-8 fuel. Ind. Eng. Chem. Res. 27(2), 362–363 (1988)
Haluska, J.L.: Process Fouling Control by Effective Antifoulant Selection. Paper No. 153, Corrosion/76, Houston, March 22–26 (1976)
Miller, P.C., Bott, T.R.: The Removal of Biological Films Using Sodium Hypochloride. International Chemical Engineering Conference on Fouling. Science or Art? Surrey University, Guildford (1979)
Birchall, G.A.: Achieving Microbiological Control in Open Recirculating Cooling Systems. Conference on Progress in the Prevention of Fouling in Industrial Plant. University of Nottingham. Nottingham (1981)
Grier, J.C., Christensen, R.J.: Microbiological Control in Alkaline Cooling Water Systems. Presented at the National Association of Corrosion Engineers Annual Meeting, Toronto (1975)
Waite, T.D., Fagan, J.R: Summary of Biofouling Control Alternatives. Condenser Biofouling Control, Publisher J. Garey, Ann Arbor Science (1980)
Grade, R., Thomas, B.M.: The Influence and Control of Algae in Industrial Cooling Systems. International Chemical Engineering Conference on Fouling. Science or Art? Surrey University, Guildford (1979)
Knudsen, J.G., Jou, H.Y., Herman, K.W.: Heat Transfer Characteristics of an Electrically Heated Annular Test Section for Determining Fouling Resistances. DREW Industrial Division, Report CWI-TP-18. Pasadena, Maryland, (1985)
Mott, I.E., Bott, T.R., Stickler, D.J., Coakley, W.T.: Ultrasound in the control of biofilms in pipes. In: Fouling Mitigation of Industrial Heat Exchange Equipment, S. 213–227. Begell House Publisher, Danbury (1995)
SPIRELF System.: American European Consulting Company. Houston
Haquet, I.: TURBOTAL-System for Reduced Fouling in Crude Oil Heat Exchangers. Proceedings Engineering Foundation Conference on Heat Exchanger Fouling, Snells Beach (1994)
HEATEX Radial Mixing Element.: A patented system developed by CAL GAVIN LTD., Birmingham
KALVO VOGLER GMBH.: Automatisches Reinigungssystem für Kondensatoren und Röhrenwärmeaustauscher
Someah, K.: On-line tube cleaning – the basics. Chem. Eng. Progress. New York 39–45 (1992)
TAPROGGE Report 84-15.: Test of TAPROGGE Condenser Tube Cleaning System to Prevent Silica and Calcium Carbonate Scaling. TAPROGGE GmbH (1984)
Eimer, K.: Recommendations for the Optimum Cleaning Frequency of the TAPROGGE Tube Cleaning System. TAPROGGE Technical Report 85-26 (1985)
ScaleWatcher.: Electronic scale elimination. B&D Ingenieursburo. https://www.scalewatcher.com, Alphen aan den Rijn. Niederlande
Parkinson, G., Price, W.: Getting the most out of cooling water. Chem. Eng. 91(1), 22–25 (1984)
Donaldson, J., Grimes, S.: Lifting the scale from our pipes. New Scientist. 18, 43–46 (1988)
Cho, Y.I., Lee, S.H., Kim, W., Suh, S.: Physical water treatment for the mitigation of mineral fouling in cooling-tower water applications, in heat exchanger fouling and cleaning: fundamentals and applications. In: Watkinson, A.P., Müller-Steinhagen, H., Reza Malayeri, M. (Hrsg.) ECI Symposium Series, Volume RP1. http://services.bepress.com/eci/heatexchanger/4 (2003)
Hasson, D., Bramson, D.: Effectiveness of magnetic water treatment in suppressing CaCO3 scale deposition. Ind. Eng. Chem. Process. Des. Dev. 24, 588–592 (1985)
Söhnel, O., Mullin, J.: Some comments on the influence of a magnetic field on crystalline scale formation. Chem. Ind. 6, 356–358 (1988)
Limpert, G.J.C., Raber, J.L.: Test of non-chemical scale control devices in a once through system. Corrosion. 85, 250 (1985)
Physikalische Wasserbehandler.: Ein Schlag ins Wasser. Stiftung Warentest 1 (2000)
Betz Laboratories, Inc.: Handbook of Industrial Water Conditioning, 7. Aufl., S. 24–29. Trevose (1976)
Fryer, P.: The balance between chemical and physical effects in the cleaning of milk fouling deposits, School of Chemical Engineering, University of Birmingham, Birmingham (2004)
Hollands, H.F.: In-Service Cleaning of Boilers Using Chelants. Conference on Progress in the Prevention of Fouling in Industrial Plant. Nottingham University (1981)
French, M.A.: Chemical Cleaning in Practice. Conference on Progress in the Prevention of Fouling in Industrial Plant. Nottingham University, Nottingham (1981)
Roebuck, A.H., Bennett, C.A.: Heat transfer payback is a key to chemical cleaning choice. Oil Gas J. 9, 93–96 (1977)
Axsom, J.F.: Heat exchanger cleaning method cuts costs, ups throughput. Oil J. 6, 71–72 (1977)
Kho, T., Hughes, D., Müller-Steinhagen, H.: Plate Heat Exchanger Fouling. UK National Heat Transfer Conference (1997)
Conco Systems, Inc., http://www.concosystems.com/products/tube-cleaners 135 Sylvan St., Verona, PA 15147
Hovland, A.W.: Effective condenser cleaning improves system heat rate. Power Eng. 82, 49–50 (1978)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Section Editor information
Rights and permissions
Copyright information
© 2019 Springer-Verlag GmbH Deutschland, ein Teil von Springer Nature
About this chapter
Cite this chapter
Zettler, H.U. (2019). C3 Wärmeübertrager: Verminderung der Ablagerungsbildung. In: Stephan, P., Kabelac, S., Kind, M., Mewes, D., Schaber, K., Wetzel, T. (eds) VDI-Wärmeatlas. Springer Reference Technik(). Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-52989-8_8
Download citation
DOI: https://doi.org/10.1007/978-3-662-52989-8_8
Published:
Publisher Name: Springer Vieweg, Berlin, Heidelberg
Print ISBN: 978-3-662-52988-1
Online ISBN: 978-3-662-52989-8
eBook Packages: Computer Science and Engineering (German Language)