Zusammenfassung
Geeignete Lösungsstrategien zur Entschärfung von Raum Zeit Konflikten sind ein wesentlicher Bestandteil bei der Modellierung von Arbeitsräumen. Algorithmen werden zur Konfliktlösung entwickelt, die auf 2D Transformation basieren. Für unterschiedliche Gewerke werden verschieden große Arbeitsräume benötigt. Zwischen mehreren Gewerken kommt es häufig zur Überschneidung. Daher wird jeder Platzbedarf, und damit seine erforderlichen Eigenschaften zur Ausübung eines Gewerkes, als separates Objekt betrachtet. Verschiedene Strategien können dann angewendet werden, wenn bei der Erstellung der Ablaufplanung Raum Zeit Konflikte zwischen zwei Arbeitsräumen auftreten.
Entsprechend der Schwere des Konflikts, des Typs und der Charakteristika der Überlappung wird automatisiert eine der vorbereiteten und geeigneten Lösungsstrategien angewendet und werden Vorschläge zur Modifizierung entweder der Position der Arbeitsbereiche, ihrer Orientierung oder Größe generiert. Die Priorität wird so gesetzt, dass der Abstand zwischen dem bisher allokierten Bereich und der neuen Allokation möglichst gering ist, um den Konflikt mit möglichst wenig Aufwand zu beheben. Die vorgeschlagenen Konfliktlösungsstrategien sind dazu geeignet, zwei beliebige Arbeitsbereiche unterschiedlicher Gewerke zu entflechten.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
Literatur
Thabet WY, Beliveau YJ (1997) SCaRC: Space-constrained resource-constrained scheduling system. J Comput Civ Eng 11(1):48–59
Riley DR, Sanvido VE (1995) Patterns of construction-space use in multistory buildings. J Constr Eng Manage 121(4):464–473
Riley D (1998) 4D space planning specification development for construction work spaces. In: Proceedings of the international computing congress, Reston, VA, S 354–363
Kamat VR (2003) VITASCOPE – extensible and scalable 3D visualization of simulated construction operations. PhD dissertation, Department of Civil Engineering. Blacksburg, Virginia, Polytechnic Institute and State University
Akinci B, Fischer M, Levitt R, Carlson R (2002) Formalization and automation of time-space conflict analysis. J Comput Civ Eng 6(2):124–135
Guo SJ (2002) Identification and resolution of work space conflicts in building construction. J Constr Eng Manage 128(4):287–295
Bargstädt HJ, Elmahdi A (2010) Simulation von Bauprozessen – ein Qualitätssprung für die Arbeitsvorbereitung. In: 8. Grazer Baubetriebs- und Bauwirtschaftssymposium, Tagungsband 2010 – Arbeitsvorbereitung für Bauprojekte, Nutzen der Arbeitsvorbereitung für den Projekterfolg, S 131–146
Bargstädt HJ, Elmahdi A (2010) Automatic generation of workspace requirements using qualitative and quantitative description. In: 10th international conference on construction applications of virtual reality 2010. CONVR2010 Organizing Committee, Sendai, S 131–137
Elmahdi A, Bargstädt HJ, Wu IC (2011) 4D grid-based simulation framework for facilitating workspace management. In: Proceedings of the 11th international conference on construction applications of virtual reality, CONVR, Weimar
Dang TT, Elmahdi A, Bargstädt HJ (2011) Integrating genetic algorithm and simulation environment to reschedule non-critical activities considering workspace requirement. In: Proceedings of the 11th international conference on construction applications of virtual reality, Weimar, Germany, S 201
Foley JD, VanDam A, Feiner SK (1990) Computer graphics. Principles and practice. Addison Wesley, Reading
Marsh D (2005) Applied geometry for computer graphics and CAD. Springer, Berlin
McConnell JJ (2005) Computer graphics: theory into practice. Jones & Bartlett Pub, Boston
Bhatia PK (2008) Computer graphics. I K International Publishing House Pvt Ltd, New Delhi
Siemens (2012) Plant simulation produktblatt. http://www.plm.automation.siemens.com/de_at/Images/plant_simulation_tcm761-62431.pdf. Access 30.08.2012
Siemens (2012) Plant simulation. http://www.plm.automation.siemens.com/de_de/products/tecnomatix. Access 30.08.2012
König M, Beißert U, Steinhauer D (2008) Handbuch zum Simulationsbausteinkasten für den Schiffbau. Handbuch STS
Steinhauer D, König M, Bargstädt HJ (2007) Branchenübergreifende Kooperation zur Simulation von Montageabläufen beim Innenausbau von Schiffen. Hansa Int Marit J Appl Mech
Beißert U, König M, Bargstädt HJ (2007) Constraint-based simulation of outfitting processes in building engineering. In: Proceedings of the 24th international conference managing IT in construction CIB W078, Maribor, Slovenia, S 491–497
König M, Beißert U, Bargstädt HJ (2007) Visual simulation – an appropriate approach to support execution planning in building engineering. In: Proceedings of the 7th international conference on construction applications of virtual reality. Pennsylvania State University, USA, S 189–197
Voigtmann JK, Bargstädt HJ (2008) Simulation of construction logistics in outfitting processes. Zarli A, Scherer R (Hrsg) eWork and eBusiness in architecture, engineering and construction, European conference on product and process modelling 2008. Taylor & Francis Group, London. ISBN 978-0-203-88332-7 (Hardbook), ISBN 978-0-415-48245-5 (eBook)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Bargstädt, HJ., Elmahdi, A. (2014). Konfliktbehandlung bei mehreren Gewerken. In: Scherer, R., Schapke, SE. (eds) Informationssysteme im Bauwesen 2. VDI-Buch. Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-44760-4_4
Download citation
DOI: https://doi.org/10.1007/978-3-662-44760-4_4
Publisher Name: Springer Vieweg, Berlin, Heidelberg
Print ISBN: 978-3-662-44759-8
Online ISBN: 978-3-662-44760-4
eBook Packages: Computer Science and Engineering (German Language)