Abstract
New product development is notably affected by uncertainties that are a consequence of insufficient experience and missing knowledge. If uncertainties are not managed adequately, they will finally lead to risks. We therefore advocate an integrated agile development process, allowing for explicit modelling of uncertainties and reaction strategies as well as the evaluation of the resulting risk caused by the changes to the product in development or the development process. As changes can again lead to undesired change propagation, finally resulting in new uncertainties and in consequence new risks, uncertainty response strategies need to be developed, evaluated and conducted collaboratively. In this publication the Integrated System and Risk Managing Model is presented, enabling users to describe and analyze product and process based uncertainties as well as potential response options within one consistent system. This paper elaborates the underlying structure of the model and concentrates on the modelling process, also explaining the application using examples from a case study.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Ahmad, N., Wynn, D. C., Clarkson, P. J. (2013) Change impact on a product and its redesign process: a tool for knowledge capture and reuse. In: Journal of Research in Engineering Design, Vol. 24, no. 3, p. 219-244
Bitz, H. (2000) Abgrenzung des Risiko-Frühwarnsystems i.e.S nach KonTraG zu einem umfas- senden Risiko-Managementsystem im betriebswirtschaftlichen Sinne. Betriebswirtschaftliche Forschung und Praxis, Vol. 52, no. 3, p. 231-241
Boehm, B. W. (1988) A Spiral Model of Software Development and Enhancement. Computer, Vol. 21, no. 5, p. 61-72
Browning, T. R. (1998) Modeling and Analyzing Cost, Schedule and Performance in Complex System Product Development. PhD thesis, Massachusetts Institute of Technology, Cambridge, Massachusetts
Chua, D. K. H., Hossain, M. A. (2012) Predicting change propagation and impact on design schedule due to external changes. In: IEEE Engineering Management, Vol. 59, No. 3, p. 483-493
Clarkson, P. J., Simons, C. S., Eckert, C. M. (2004) Predicting change propagation in complex design. In: Journal of Mechanical Design, Vol. 126, No. 5, p. 788-797
Conrow, E. H. (2003) Effective Risk Management: Some Keys to Success. 2nd edition, American Institute of Aeronautics and Astronautics, Virginia
Ehrlenspiel, K. (2007) Integrierte Produktentwicklung – Denkabläufe, Methodeneinsatz, Zusammenarbeit. 3. Auflage. Carl Hanser Verlag München Wien, München
Engelhardt, R., Wiebel, M., Eifler, T., Kloberdanz, H., Birkhofer, H., Bohn, A. (2011) UMEA – A Follow-Up to Analyse Uncertainties in Technical Systems. International Conference on Engineering Design, Technical University of Denmark
Ericson, A., Kastensson, A. (2011) Exploit and Explore: Two Ways of Categorizing Innovation Projects. In: Proceedings of the International Conference on Engineering Design 2011, Copenhagen, Denmark
Ferreira, V. V., Ogliari, A. (2005) Guidelines for a risk management methodology for product design, Product: Management & Development, Vol. 3, no. 1
Gericke, K. (2011) Enhancing Project Robustness: A Risk Management Perspective. Dissertation, Technische Universität Berlin, Berlin, Germany
Gleißner, W. (2001) Grundlagen des Risikomanagements im Unternehmen. 2. Auflage, Verlag Franz Vahlen GmbH, München
Hastings, D., McManus, H. (2004) A Framework for Understanding Uncertainty and its Mitigation and Exploitation in Complex Systems. In: 2004 Engineering Systems Symposium, Cambridge
Hölscher, R. (1987) Risikokosten-Management in Kreditinstituten – Ein integratives Modell zur Messung und ertragsorientierten Steuerung der bankbetrieblichen Erfolgsrisiken. In: Schriftenreihe des Institutes für Kreditwesen, Universität Münster
Koh, E. C. Y., Caldwell, N. H. M., Clarkson, P. J. (2012) A method to assess the effects of engineering change propagation. In: Journal of Research in Engineering Design, Vol. 23, no. 4, p. 329-351
Maurer, M. (2007) Structural Awareness in Complex Product Design. Dr. Hut Verlag, München Smith, R. P., Eppinger, S. D. (1997) A Predictive Model of Sequential Iteration in Engineering Design. In: Management Science, Vol. 43, No. 8, p. 1104-1120
Smith, P. G., Merritt, G. M. (2002) Proactive Risk Management – Controlling Uncertainty in Product Development. Productivity Press, New York, USA
Tang, D., Xu, R., He, R. (2008) Design structure matrix-based engineering change management for product development. In: International Journal of Internet Manufacturing and Services, Vol. 1, no. 3, p. 231-245
VDI (2004) VDI-Richtlinie 2206: Entwicklungsmethodik für mechatronische Systeme. Beuth Verlag, Berlin
Verworn, B. (2005) Die frühen Phasen der Produktentwicklung: Eine empirische Analyse in der Mess-, Steuer- und Regelungstechnik. Dt. Univ.-Verlag
Weck, O., Eckert, C., Clarkson, J. (2007) A classification of uncertainty for early product and system design. In: Proceedings of the International Conference on Engineering Design 2007, Paris
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Neumann, M., Sporbeck, M., Sadek, T., Bender, B. (2015). A Model Based Approach to Support Risk Management in Innovation Projects. In: Schabacker, M., Gericke, K., Szélig, N., Vajna, S. (eds) Modelling and Management of Engineering Processes. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-44009-4_4
Download citation
DOI: https://doi.org/10.1007/978-3-662-44009-4_4
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-44008-7
Online ISBN: 978-3-662-44009-4
eBook Packages: EngineeringEngineering (R0)