Zusammenfassung
Bei der vollständigen Verbrennung eines nur aus C- und H-Atomen bestehenden, so genannten CxHy-Brennstoffes enthält das Abgas die Komponenten Sauerstoff (O2), Stickstoff (N2), Kohlendioxid (CO2) undWasserdampf (H2O). Bei der realen Verbrennung treten zusätzlich zu diesen Bestandteilen auch die Produkte der unvollständiger Verbrennung Kohlenmonoxid (CO) und unverbrannte Kohlenwasserstoffe (HC) sowie die unerwünschten Nebenprodukte Stickoxide (NOx) und Partikel auf. Im Gegensatz zu den durch den Gesetzgeber limitierten Abgaskomponenten wird das CO2 nicht als Schadstoff angesehen, da es keine direkte Gefahr für die Gesundheit des Menschen darstellt und als Endprodukt jeder vollständigen Oxidation einesKohlenwasserstoffs auftritt. Im Folgenden werden die Entstehungsmechanismen der oben genannten Schadstoffe beschrieben sowie inner- und nachmotorische Methoden zur Reduktion dieser Stoffe dargestellt.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
Literatur
Adolph, D., Lamping, M., Körfer, T., Kolbeck, A.: Variabler Ventiltrieb beim DI-Diesel – Eine neue Funktionalität zur gezielten Steuerung der Ladungsbewegung. In: Variable Ventilsteuerung: Technische Konzepte variabler Ventiltriebe zur Reduzierung des Kraftstoffverbrauchs und der Emissionen, S. 261–277. Haus der Technik, Aachen (2009)
Amiridis, M.D., Zhang, T., Farrauto, R.J.: Selective catalytic reduction of nitric oxide by hydrocarbons. Applied Catalysis B: Environmental 10(1), 203–227(25) (1996)
Amnéus, P., Mauß, F., Kraft, M., Vressner, A., Johansson, B.: SAE Paper 2005-01-0126 (2005)
Appel, J., Bockhorn, H., Wulkow, M.: A detailed numerical study of the evolution of soot particle size distributions in laminar premixed flames. Chemosphere 42, 635–645 (2001)
Bals, R., Behnk, K., Grünig, C., Hess, D., Langeheinecke, K.-J., Pellert, K., Krämer, L.: Assessment of 3rd Generation SCR Systems for Potential Future Applications. 2 Tagung MinNox, Berlin (2008)
van Basshuysen, R. (Hrsg.): Ottomotor mit Direkteinspritzung: Verfahren, Systeme, Entwicklung, Potenzial, 2. Aufl. Aufl. Vieweg+Teubner, Wiesbaden (2008)
Baulch, D.L., Cobos, C.J., Cox, A.M., Frank, P., Haymann, G., Just, T., Kerr, J.A., Murrels, T., Pilling, M.J., Twe, J., Walker, R.W., Warnatz, J.: Evaluated Kinetic Data for Combustion Modeling. Supplement I. J. Phys. Chem. Ref. Data 22, 847 (1994)
Belardini, P., Bertori, C., Cameretti, M.C., Del Giacomo, N.: A Coupled Diesel Combustion and Sod Formation Model for KIVA II Code: Characteristics and Experimental Validation. Int. Symp. COMODIA, A94, 315–323 (1994)
Besio, G., Nobile, M.: A Challenging Fuel for Diesel Engines: Orimulsion, From the Concept to the Application, CIMAC Congress. CIMAC, Hamburg (2001)
Bockhorn, H.: A Short Introduction to the Problem – Structure of the Following Parts. In: Bockhorn, H. (Hrsg.) Soot Formation in Combustion. Springer Verlag, Berlin, Heidelberg, New York (1994)
Borrmeister, J., Hübner, W.: Einfluss der Brennraumform auf die HC-Emissionen und den Verbrennungsablauf. Motortechnische Zeitschrift MTZ 58, 408–414 (1997)
Bosch, H., Janssen, F.J.J.G., van den Kerkhof, F.M.G., Oldenziel, J., van Ommen, J.G., Ross, J.R.H.: The activity of supported vanadium oxide catalysts for the selective reduction of NO with ammonia. Applied Catalysis 25, 239–248 (1986)
Brück, R., Hirth, P., Konieczny, R.: Der PM-Metalit; Erfahrungen mit dem Nebenstrom Partikelfiltersystem hinsichtlich Reduzierung der Partikelanzahl und -Masse bei Pkw- und Lkw-Anwendungen. 4. Internationales Forum Abgas- und Partikelemissionen (2006)
Bühler, U.: Prüfstandsuntersuchungen zur Dioxin-Emission von Verbrennungsmotoren (1995). Dissertation, Universität Stuttgart
Bühler, U., Essers, U., Greiner, R.: Dioxin-Emission des Straßenverkehrs. MTZ 58, 422–425 (1997)
Bunar, F., Schrade, F., Tourlonias, P., Friedrichs, O., Krämer, L.: Applying SCR/DPF to Passenger Cars. Tagung MinNox. IAV, Berlin (2012)
Cavataio, G., Jen, H.-W., Warner, J.R., Girard, J.W., Kim, J.Y., Lambert, C.K.: Enhanced Durability of a Cu/Zeolite Based SCR Catalyst. SAE Paper 2008-01-1025 (2008)
Chatterjee, D., Burkhardt, T., Weibel, M., Tronconi, E., Nova, I., Ciardelli, C.: Numerical Simulation of NO/NO2/NH3 Reactions on SCR-Catalytic Converters: Model Development and Applications. SAE Paper 2006-01-0468 (2006)
Cheng, W.K., Hamrin, D., Heywood, J.B., Hochgreb, S., Min, K., Norris, M.: An Overview of Hydrocarbon Emissions Mechanisms in Spark-Ignition Engines. SAE Paper 932708 (1993)
Cui, Q., Morokuma, K., Bowman, J.M., Klippenstein, S.J.: The spin-forbidden reaction CH(2Π) + N2 → HCN + N(4S) revisited. II. Nonadiabatic transition state theory and application. J. Chem. Phys. 110(19), 9469–9482 (1999)
Devadas, M., Kröcher, O., Elsener, M., Wokaun, A., Söger, N., Pfeifer, M., Demel, Y., Mussmann, L.: Influence of NO2 on the selective catalytic reduction of NO with ammonia over Fe-ZSM5. Applied Catalysis B: Environmental 67, 187–196 (2006)
Devarakonda, M.N., Tonkyn, R.G., Tran, D.N., Male, J.L.: Modeling and Experimental Studies of HNCO as a Reactant for NOx Control. 21st North American Catalyst Society Meeting (2009)
Dohle, U.: MTU Solutions for Meeting Future Exhaust Emissions Regulations, Paper 284, Cimac Congress 2010. CIMAC, Bergen (2010)
Eckert, P.: Numerical and Experimental Investigation of Water Introduction into DI Diesel Engine Combustion TH, Bd. 3. Logos Verlag (2008). Dissertation Universität Karlsruhe
EN ISO 8178-01: Hubkolben Verbrennungsmotoren, Abgasmessungen, Teil 1: Messung der gasförmigen Emissionen und der Partikelemissionen auf dem Prüfstand, EN-ISO 8178-01 (1996)
Eng, J.A.: The Effect of Spark Retard on Engine-out Hydrocarbon Emissions. SAE Paper 3867 (2005)
Fenimore, C.P.: Formation of Nitric Oxide in Premixed Hydrocarbon Flames. 13th Int. Symp. Combustion. The Combustion Institute, Pittsburgh, PA, S. 373–380 (1971)
Frenklach, M.: Method of moments with interpolative closure. Chem. Eng. Sci. 57, 2229–2239 (2002)
Frenklach, M., Wang, H.: Detailed Mechanism and Modeling of Soot Particle Formation. In: Bockhorn, H. (Hrsg.) Soot Formation in Combustion. Springer Verlag (1994)
Friedlander, S.K.: Theory of Aerosol Filtration. Ind. Eng. Chem. 50(8), 1161–1164 (1958)
Fusco, A., Knox-Kelecy, A.L., Foster, D.E.: Application of a Phenomenological Soot Model to Diesel Engine Combustion. Int. Symp. COMODIA 94, 571–576 (1994)
Girard, J.W., Montreuil, C., Kim, J., Cavataio, G., Lambert, C.K.: Technical Advantages of Vanadium SCR Systems for Diesel NOx Control in Emerging Markets. SAE Paper 2008-01-1029 (2008)
Glarborg, P., Alzueta, M.U., Dam-Johansen, K., Miller, J.A.: Kinetic Modeling of Hydrocarbon/Nitric Oxide Interactions in a Flow Reactor. Combust. Flame 115, 1–27 (1998)
GRI-MECH 3.0: www.me.berkely.edu/gri_mech (2000)
Gruber, M.: The selective catalytic reduction of NO by NH3 at Brønsted and Lewis acid sites of vanadium oxide surfaces: Density functional theory studies. (2011). Dissertation Freie Universität Berlin
Grünzweig, C., Mannes, D., Kaestner, A., Vogt, M.: Visualisierung der Ruß- und Ascheverteilung in Dieselpartikelfiltern mittels Neutronen-Imaging. MTZ 2012(04), 362–331 (2012)
Halbei, J., Többen, H., Rudelt, J., Neumann, F., Calvo, S., Oesterle, J.: Mischer zur Optimierung von Harnstoff-SCR Systemen. 1. Internationale Tagung MinNOx. Haus der Technik, Berlin (2007)
Haralampous, O.A., Koltsakis, G.C., Samaras, Z.C., Vogt, C.-D., Ohara, E., Watanabe, Y., Mizutani, T.: Reaction and Diffusion Phenomena in Catalyzed Diesel Particulate Filters. SAE Paper 2004-01-0696 (2004)
Herrmann, H.O., Nielsen, B., Gropp, C., Lehmann, J.: Mittelschwerer Nfz-Motor von Mercedes-Benz Teil 1: Motor- und Abgasreinigungskonzept. MTZ 2012(10), 162–171 (2012)
Hertzberg, A.: Betriebsstrategien für einen Ottomotor mit Direkteinspritzung und NOx-Speicher-Katalysator (2001). Dissertation Universität Karlsruhe,
Heywood, J.B.: Internal Combustion Engine Fundamentals. McGraw-Hill, Publ., New York (1988)
Hill, P.G., McTaggert-Cowan, G.P.: Nitrogen Oxide Production in a Diesel Engine Fueled by Natural Gas. SAE Paper 2005-01-1727 (2005)
Hiroyasu, H., Kadota, T., Arai, M.: Supplementary Comments: Fuel Spray Characterization in Diesel Engines. In: Combustion Modelling in Reciprocating Engines, S. 369–408 (1980)
Hoepke, E.: IAA Nutzfahrzeuge in Hannover. MTZ 9, 650–656 (2004)
Hydrocarbons. Applied Catalysis B: Environmental 10, 203–227
Johnson, T.V.: Diesel emission control highlights of the annual Society of Automotive Engineers (SAE) international congress. Verweis auf Laroo, C.A. (unveröffentlicht). Platinum Metals Rev 54(4), 216–222 (2010)
Kazakow, A., Foster, D.E.: Modeling of Soot Formation during DI Diesel Combustion using a Multi-Step Phenomenological Soot Model. SAE Paper 982463 (1998)
Kittelson, D.B.: Engines and Nanoparticles. A Review, Journal of Aerosol Science 29, 575–588 (1998)
Koebel, M., Elsener, M., Kleemann, M.: Urea-SCR: a promising technique to reduce NOx emissions from automotive diesel engines. Catalysis Today 59, 335–345 (2000)
Koltsakis, G.C., Haralampous, O.A., Samaras, Z.C., Krämer, L., Heimlich, F., Behnk, K.: Control Strategy for Peak Temperature Limitation in DPF Regeneration Supported by Validated Modeling. SAE Paper 2007-01-1127 (2007)
Koltsakis, G.C., Haralampous, O., Tsinoglou, D., Margaritis, N., Samaras, Z.: Modeling of diesel de-NOx aftertreatment components. Tagung MinNox. Haus der Technik, Berlin (2007)
Kompio, P.G.W.A.: Der Einfluss von Hochtemperatur auf V2O5-WO3/TiO2-Katalysatoren für die Selektive Katalytische Reduktion von Stickoxiden mit Ammoniak. (2010). Dissertation, Ruhr-Universität Bochum
Konstandopolous, A.G., Kostoglou, M., Skaperdas, E., Papaioannou, E., Zarvalis, D., Kladopoulou, E.: Fundamental Studies of Diesel Particulate Filters: Transient Loading, Regeneration and Aging. SAE Paper 2000-01-1016 (2000)
Krämer, L., Buschmann, G., Stiegler, L, Bunar, F., Richardson, S., Friis Hansen, K.: SULEV: Diesel-Exhaust Gas Aftertreatment heading to Super Ultra Low Emissions. Wiener Motorensymposium 2013 (2013)
Kröcher, O., Elsener, M., Jacob, E.: Neue Reduktionsmittel für die Low NOx-SCR-Technik. AVL Partikelforum (2008)
Kweon, C.-B., Foster, D.E., Schauer, J.J., Okada, S.: Detailed Chemical Composition and Particle Size Assessment of Diesel Engine Exhaust. SAE Paper 2002-01-2670 (2002)
Ladommatos, N., Abdelhalim, S.M., Zhao, H., Hu, Z.: The Dilution, Chemical and Thermal Effects of Exhaust Gas Recirculation on Diesel Engine Emissions – Part 4: Effects of Carbon Dioxide and Water Vapour. SAE Paper 971660 (1997)
Lange, J.: Bestimmung der Carbonylverbindungen im Abgas von schwerölbetriebenen Dieselmotoren Fortschritt-Berichte VDI, Reihe 15, Bd. Nr. 161. VDI Verlag, Düsseldorf (1996)
Lavoie, G.A., Heywood, J.B., Keck, J.C.: Experimental and Theoretical Investigation of Nitric Oxide Formation in Internal Combustion Engines. Combust. Sci. Technol. 1, 313–326 (1970)
Liu, Y., Amr, A., Reitz, R.D.: Simulation of Effects of Valve Pockets and Internal Residual Gas Distribution on HSDI Diesel Combustion and Emissions. SAE Paper 2004-01-0105 (2004)
Liu, Z.G., Ottinger, N.A., Wall, J.C., Barge, P.: Measurement of Dioxin and Furan Emissions during Transient and Multi-Mode Engine Operation. SAE Paper 2011-01-1158 (2011)
Maass, J., Eppler, A., Scholz, J., Gentgen, H., Grumbrecht, F., Marohn, R.: Influences of AdBlue® spray targeting and mixing devices on the UWS distribution upstream of the SCR catalyst. IMECHE Fuel Systems for IC Engines, March 2012 (2012)
Madia, G., Koebel, M., Elsener, M., Wokaun, A.: Side Reactions in the Selective Catalytic Reduction of NOx with Various NO2 Fractions. Ind. Eng. Chem. Res. 41, 4008–4015 (2002)
Marohn, R., Rakowski, S., Seebode, J., Brauer, M.: Einspritzdruckbedarf für zukünftige dieselmotorische Pkw und Nkw Brennverfahren, Haus der Technik: Diesel- und Benzindirekteinspritzung (2008)
Mathis, U., Mohr, M., Kaegi, R., Bertola, A., Boulouchos, K.: Influence of Diesel Engine Combustion Parameters on Primary Soot Particle Diameter. Environ. Sci. Technol. 39(5), 1887–1892 (2005)
Maus, W., Brück, R., Hodgson, J., Vorsmann, C.: Elektrostatischer Partikelfilter zur Reduktion der Nanopartikel. MTZ 2, 116–121 (2011)
Mauß, F.: Entwicklung eines kinetischen Modells der Rußbildung mit schneller Polymerisation (1997). Dissertation RWTH Aachen
McEnally, C.S., Ciuparu, D.M., Pfefferle, L.D.: Experimental study of fuel decomposition and hydrocarbon growth processes for practical fuel components: heptanes. Combust. Flame 134, 339–359 (2003)
McEnally, C.S., Pfefferle, L.D., Atakan, B., Kohse-Höinghaus, K.: Studies of aromatic hydrocarbon formation mechanisms in flames: Progress towards closing the fuel gap. Prog. Energy and Combust. Sci. 32, 247–294 (2006)
Miller, J.A., Bowman, C.T.: Mechanism and Modeling of Nitrogen Chemistry in Combustion. Prog. Energy Combust. Sci. 15, 287–338 (1989)
Mosbach, S., Celnik, M.S., Raj, A., Kraft, M., Zhang, H.R., Kubo, S., Kim, K.-O.: Towards a detailed soot model for internal combustion engines. Combust. Flame 156, 6 (2009)
Moskaleva, L.V., Xia, W.S., Lin, M.C.: The CH+N2 reaction over the ground electronic doublet potential energy surface: a detailed transition state search. Chem. Phys. Let. 331, 269–277 (2000)
Musculus, M.P.B., Dec, J.E., Tree, D.R., Daly, D., Langer, D., Ryan, T.W., Matheaus, A.C.: Effects of Water-Fuel Emulsion on Spray and Combustion Processes in a Heavy-Duty DI Diesel Engine. SAE Paper 2002-01-2892 (2002)
N.N.: 2. Dioxinbericht des Landes Sachsen-Anhalt – Fortschreibung des Berichts von 1996. Landesamt für Umweltschutz Sachsen-Anhalt, Halle (Saale) (2011)
Nagle, J., Strickland-Constable, R.F.: Oxidation of Carbon between 1000–2000 °C. Proc. 5th Conf. on Carbon 1, 154–164 (1962)
Neoh, K.G.: Soot Burnout in Flames (1976). Ph.D. thesis, MIT
Netzell, K., Lehtiniemi, H., Mauss, F.: Calculating the soot particle size distribution function in turbulent diffusion flames using a sectional method. Proc. Combust. Inst. 31, 667–674 (2007)
Nishida, K., Hiroyasu, H.: Simplified Three-Dimensional Modeling of Mixture Formation and Combustion in a DI Diesel Engine. SAE Paper 890269 (1989)
Ogunwumi, S.B., Tepesch, P.D., Chapman, T., Warren, C.J., Melscoet-Chauvel, I.M., Tennent, D.L.: Aluminum Titanate Compositions for Diesel Particulate Filters. SAE Paper 2005-01-0283 (2005)
Pace, L., Presti, M.: Changing the Substrate Technology to meet Future Emission Limits. SAE Paper 2010-01-1550 (2010)
Pattas, K.: Stickoxidbildung bei der ottomotorischen Verbrennung. MTZ 34, 397–404 (1973)
Piazessi: The Catalytic Hydrolysis of Isocyanic Acid (HNCO) in the Urea-SCR Process (2006). Dissertation No. 16693, ETH Zürich
Pischinger, F., Schulte, H., Hansen, J.: Grundlagen und Entwicklungslinien der Dieselmotorischen Brennverfahren VDI Berichte, Bd. Nr. 714. VDI Verlag, Düsseldorf (1988)
Salvat, O., Marez, P., Belot, G.: Passenger Car Serial Application of a Particulate Filter System on a Common Rail Direct Injection Diesel Engine. SAE Paper 2000-01-0473 (2000)
Schaber, P.M., Colson, J., Higgins, S., Thielen, D., Anspach, B., Brauer, J.: Thermal decomposition (pyrolysis) of urea in an open reaction vessel. Thermochimica Acta 424, 131–142 (2005)
Schütte, T.: Ablagerungs- und Alterungsverhalten wässriger Harnstofflösung bei selektiver katalytischer Reduktion von Stickoxidemissionen (2010). Dissertation Leuphana Universität Lüneburg
Schutting, E., Neureiter, A., Fuchs, C., Schatzberger, T., Klell, M., Eichlseder, H., Kammerdiener, T.: Miller- und Atkinson-Zyklus am aufgeladenen Dieselmotor. Motorentechnische Zeitung 2007(06), 480 (2007)
Seebode, J., Stegemann, J., Sommer, A., Stölting, E., Buschmann, G.: Höchstdruckeinspritzung und Einspritzverlaufsformung am Nfz-Einzylindermotor. 15. Aachener Kolloquium Fahrzeug- und Motorentechnik (2006)
von Smoluchowski, M.Z.: Versuch einer mathematischen Theorie der Koagulationskinetik koloider Lösungen. Zeitschrift für Physikalisch Chemie 92(2), 129–268 (1917)
Stiesch, G.: Modeling Engine Spray and Combustion Processes. Springer-Verlag, Berlin Heidelberg New York (2003)
Sutton, J.A., Fleming, J.W.: Towards accurate kinetic modelling of prompt NO formation in hydrocarbon flames via the NCN pathway. Combust. Flame 154, 630–636 (2008)
Sutton, J.A., Williams, B.A., Fleming, J.W.: Laser-induced fluorescence measurements of NCN in low-pressure CH4/O2/N2 flames and its role in prompt NO formation. Combust. Flame 153, 465–478 (2008)
Tao, F., Liu, Y., Rempel Ewert, B.H., Foster, D.E., Reitz, R.D., Choi, D., Miles, P.C.: Modeling the Effects of EGR and Injection Pressure on Soot Formation in a High-Speed Direct-Injection (HSDI) Diesel Engine Using a Multi-Step Phenomenological Soot Model. SAE Paper 2005-01-0121 (2005)
Tao, F., Reitz, R.D., Foster, D.E., Liu, Y.: Nine-step phenomenological diesel soot model validated over a wide range of engine conditions. International Journal of Thermal Sciences 48(6), 1223–1334 (2009)
Tinschmann, G., Thum, D., Schlueter, S., Pelemis, P., Stiesch, G.: Sailing towards IMO Tier III – Exhaust Aftertreatment versus Engine-Internal Technologies for Medium Speed Diesel Engines. Paper 274, Cimac Congress 2010. CIMAC, Bergen (2010)
Tronconi, E., Nova, I., Ciardelli, C., Chatterjee, D., Bandl-Konrad, B., Burkhardt, T.: Modelling of an SCR catalytic converter for diesel exhaust after treatment: Dynamic effects at low temperature. Catylsis Today 105, 529–536 (2005)
Upatnieks, A., Mueller, C.J., Martin, G.C.: The Influence of Charge-Gas Dilution and Temperature on DI Diesel Combustion Processes Using a Short-Ignition-Delay, Oxygenated Fuel. SAE Paper 2005-01-2088 (2005)
Vishwanathan, G., Reitz, R.D.: Modeling Soot Formation Using Reduced Polycyclic Aromatic Hydrocarbon Chemistry in n-Heptane Lifted Flames with Application to Low Temperature Combustion. J. Eng. Gas Turbines Power 131(3), 032801.1–032801.7 (2009)
Warnatz, J., Maas, U., Dibble, R.W.: Verbrennung: Physikalisch-Chemische Grundlagen, Modellierung und Simulation, Experimente, Schadstoffentstehung. Springer Verlag, Heidelberg (1997)
Westbrook, C.K., Dryer, F.L.: Chemical Kinetic Modeling of Hydrocarbon Combustion. Prog. Energy Combust. Sci. 10, 1–57 (1984)
Wettstein, R.: Wärtsilä Air Emission Solutions. Mare Forum – Blue Shipping Summit 2011. Athens (2011). http://old.mareforum.com/Blue_Shipping_Summit_Presentations_2011.htm
Williams, J.L.: Monolith structures, materials, properties and uses. Catalysis Today 69, 3–9 (2001)
Zeldovich, Y.B.: The Oxidation of Nitrogen in Combustion and Explosions. Acta Physicochimica, USSR 21, 577–628 (1946)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer Fachmedien Wiesbaden
About this chapter
Cite this chapter
Eckert, P., Rakowski, S. (2014). Schadstoffbildung und -reduktion. In: Merker, G., Teichmann, R. (eds) Grundlagen Verbrennungsmotoren. ATZ/MTZ-Fachbuch. Springer Vieweg, Wiesbaden. https://doi.org/10.1007/978-3-658-03195-4_7
Download citation
DOI: https://doi.org/10.1007/978-3-658-03195-4_7
Published:
Publisher Name: Springer Vieweg, Wiesbaden
Print ISBN: 978-3-658-03194-7
Online ISBN: 978-3-658-03195-4
eBook Packages: Computer Science and Engineering (German Language)