Abstract
Modern diagnostic methods form the condition-based maintenance. The way technical systems work requires work without unnecessary downtime and with as few unforeseen errors as possible. When it comes to some of the most common causes related to the operation of rotary machines, the unbalance of the rotor is one of the common problems as well as the misalignment of drive units (electric motors) and the executive element, the impeller. These two mentioned phenomena affect the reliability of operation and the service life of the machine, as they largely lead to damage of bearings, covered shaft, gears if they exist in the system and in order to avoid such issues, it is necessary to spot problems in time, which can be achieved by implementing vibrodiagnostics as a method for condition monitoring of the system. Based on the data obtained through the vibration information, appropriate corrective measures, laser alignment or dynamic rotor balancing are approached.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Ingemarsdotter, E., Kambanou, M.L., Jamsin, E., Sakao, T., Balkenende, R.: Challenges and solutions in condition-based maintenance implementation-A multiple case study. J. Clean. Prod. 296, 126420 (2021)
Quatrini, E., Costantino, F., Di Gravio, G., Patriarca, R.: Condition-based maintenance—an extensive literature review. Machines 8(2), 31 (2020)
Baldin, A.E.: Condition-based maintenance. Chem. Eng. 88, 89–95 (1981)
Byington, C.S., Roemer, M.J. Galie, T.: Prognostic enhancements to diagnostic systems for improved condition‐based maintenance [military aircraft]. IEEE Aerospace Conference, pp.2815‐2824. Montana, USA (2002)
Novaković, B., Desnica, E., Radovanović, L.J., Ivetić, R., Đorđević, L., Labović Vukić, D.: Optimization of industrial fan system using methods laser alignment. applied engineering letters. Journal of Engineering and Applied Sciences 6(2), 62–68 (2021)
Novaković, B., Radovanović, L.J., Ivetić, R., Šinik, V., Đurđev, M., Đorđević, L.: CBM Concept-predictive maintenance-vibration analysis and balancing process of industrial fans. In: X International Conference Industrial Engineering and Environmental Protection, pp. 208–213. Zrenjanin, Serbia (2020)
Djuric, Z., Josimovic, L.J., Adamovic, Z., Radovanovic, L.J., Jovanov, G.: An evaluation of formed maintenance programme efficacy. Strojniški vestnik - Journal of Mechanical Engineering 58(5), 300–308 (2012)
Adamović, Ž, Radovanović, L., Radojević, M.: Modeli održavanja na bazi tehničke dijagnostike. Tehnička dijagnostika 7(3), 29–35 (2008)
Đorđević, L, Novaković, B., Pekez, J., Radovanović, L.J., Đurđev, M.: A brief review of the application of the SPM method in order to improve preventive maintenance of bearomgs. In: X International Conference Industrial Engineering and Environmental Protection, pp. 214–218. Zrenjanin, Serbia (2020)
Ristic, M., Radovanovic, L.J., Prokic-Cvetkovic, R., Otic, G., Perisic, J.,Vasovic, I.: Increase energy efficiency of thermal power plant Kostolac B by revitalization ventilation mills. Energy Sources, Part B: Economics, Planning, and Policy 12(2), 191–197 (2017)
Otić, G., Momčilović, O., Radovanović, L., Jovanov, G., Radosav, D., Pekez, J.: Mathematical analysis of criteria for maintenance of technical systems in the function of achieving sustainability. Sustainability 13(4), 1680 (2021)
Novaković, B., Radovanović, L.J., Zuber, N., Radosav, D., Đorđević, L., Kavalić, M.: Analysis of the influence of hydraulic fluid quality on external gear pump performance. Eksploatacja i Niezawodnosc – Maintenance and Reliability 24(2), 260–269 (2022)
Amari, S., McLaughlin, L., Pham, H.: Cost‐effective condition‐based maintenance using markov decision processes. In: Reliability and Maintainability Symposium, pp. 464‐469. Newport Beach, California (2006)
Jalan, A.K., Mohanty, A.R.: Model based fault diagnosis of a rotor–bearing system for misalignment and unbalance under steady- state condition. J. Sound Vib. 327(3), 604–622 (2009)
Patel, T.H., Ashish, K.D.: Experimental Investigations on Vibration Response of Misaligned Rotors. Mech. Syst. Signal Process. 23(7), 2236–2252 (2009)
Wu, K., Liu, Z., Ding, Q.: Vibration responses of rotating elastic coupling with dynamic spatial misalignment. Mech. Mach. Theory 151, 103916 (2020)
Xu, X., Kang, Y., Qiu, Z., Wang, B.: Calibration method for a laser‐based alignment system. In: Proceedings ‐ Eleventh International Conference on Information Optics and Photonics, pp. 11209. Xi'an, China (2019)
Luo, D., Kuang, C., Hao, X., Liu, X.: High-precision laser alignment technique based on spiral phase plate. Opt. Lasers Eng. 50(7), 944–949 (2012)
Brtka, V., Makitan, V., Radovanovic, L.J., Zivkovic, Z., Momcilovic, O.: Rough sets-based prediction model for increasing safety of thermal power plants. Energy Sources, Part B: Economics, Planning, and Policy 14(3), 67–79 (2019)
Giannone, J.: Laser-optical shaft alignment cuts energy costs, pp. 22–24. World Pumps (1995)
Hariharan, V., Srinivasan, P.S.S.: Vibration analysis of misaligned shaft Vibration analysis of misaligned shaft–ball bearing system ball bearing system ball bearing system. Indian Journal of Science and Technology 2(9) (2009)
McMillan, R.B.: Rotating Machinery. River Publishers, Practical Solutions to Unbalance and Misalignment (2020)
Simm, A., Wang, Q., Huang, S., Zhao, W.: Laser based measurement for the monitoring of shaft misalignment. Measurement 87, 104–116 (2016)
Cao, H., He, D., Xi, S., Chen, X.: Vibration signal correction of unbalanced rotor due to angular speed fluctuation. Mech. Syst. Signal Process. 107, 202–220 (2018)
Li, L., Cao, S., Li, J., Nie, R., Hou, L.: Review of rotor balancing methods. Machines 9(5), 89 (2021)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Novaković, B., Ristić, M., Radovanović, L., Đorđević, L., Perišić, J. (2023). Dynamic Balance and Alignment of Rotary Machines with Vibration Parameter Control. In: Mitrovic, N., Mladenovic, G., Mitrovic, A. (eds) Experimental Research and Numerical Simulation in Applied Sciences. CNNTech 2022. Lecture Notes in Networks and Systems, vol 564. Springer, Cham. https://doi.org/10.1007/978-3-031-19499-3_9
Download citation
DOI: https://doi.org/10.1007/978-3-031-19499-3_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-19498-6
Online ISBN: 978-3-031-19499-3
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)