Abstract
The predictive maintenance of rotating machines helps to prevent economic loss and personal damage. Vibrational data of bearing is used to measure the early-stage faults but sometimes this vibrational data consists of many unwanted signals that need to be removed before applying the signal processing techniques. This paper proposes an algorithm to design a dynamic filter that can adjust its bandwidth and central frequency according to different faults that occurs in the rotating bearing. The harmony search algorithm is used to optimize the bandpass filter parameters according to the faults and the short-time Fourier trans-form-based Spectral Kurtosis helps measure the strength of fault frequencies. The filter parameters are selected that correspond to the maximum value of the short-time Fourier transform-based Spectral Kurtosis. The simulation results verify the performance of the proposed algorithm.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Randall, R.B., Antoni, J.: Rolling element bearing diagnostics—A tutorial. Mech. Syst. Signal Process. 25(2), 485–520 (2011)
Wang, W.: Early detection of gear tooth cracking using the resonance demodulation technique. Mech. Syst. Signal Process. 15(5), 887–903 (2001)
Zoubek, H., Villwock, S., Pacas, M.: Frequency response analysis for rolling-bearing damage diagnosis. IEEE Trans. Industr. Electron. 55(12), 4270–4276 (2008)
Rai, A., Upadhyay, S.H.: A review on signal processing techniques utilized in the fault diagnosis of rolling element bearings. Tribol. Int. 96, 289–306 (2016)
Cong, F., Chen, J., Dong, G., Pecht, M.: Vibration model of rolling element bearings in a rotor-bearing system for fault diagnosis. J. Sound Vib. 332(8), 2081–2097 (2013)
Omar, D.M., Rantatalo, M., Aidanpää, J.-O., Kumar, U.: Vibration signal analysis for gear fault diagnosis with various crack progression scenarios. Mech. Syst. Signal Process. 41(2), 176–195 (2013)
Kan, M.S., Tan, A.C.C., Mathew, J.: A review on prognostic techniques for non-stationary and non-linear rotating systems. Mech. Syst. Signal Process. 63, 1–20 (2015)
Jardine, A.K., Lin, D., Banjevic, D.: A review on machinery diagnostics and prognostics implementing condition-based maintenance. Mech. Syst. Signal Process. 20(7), 1483–1510 (2006)
Tandon, N., Choudhury, A.: A review of vibration and acoustic measurement methods for the detection of defects in rolling element bearings. Tribol. Int. 32(8), 469–480 (1999)
Patel, V.N., Tandon, N., Pandey, R.K.: Vibrations generated by rolling element bearings having multiple local defects on races. Procedia Technol. 14, 312–319 (2014)
Saruhan, H., Sandemir, S., Çiçek, A., Uygur, I.: Vibration analysis of rolling element bearings defects. J. Appl. Res. Technol. 12(3), 284–395 (2014)
Smith, W.A., Randall, R.B.: Rolling element bearing diagnostics using the case western reserve university data: a benchmark study. Mech. Syst. Signal Process. 65, 100–131 (2015)
Dube, A.V., Dhamande, L.S., Kulkarni, P.G.: Vibration based condition assessment of rolling element bearings with localized defects. Int. J. Sci. Technol. Res. 2(4), 149–155 (2013)
Patel, V.N., Tandon, N., Pandey, R.K.: Vibration studies of dynamically loaded deep groove ball bearings in presence of local defects on races. Procedia Eng. 64, 1582–1591 (2013)
Chen, B.Q., Zhang, Z.S., Zi, Y.Y., He, Z., Sun, C.: Detecting of transient vibration signatures using an improved fast spatial–spectral ensemble kurtosis Kurtogram and its applications to mechanical signature analysis of short duration data from rotating machinery. Mech. Syst. Signal Process. 40, 1–37 (2013)
Wang, H., Chen, J., Dong, G.: Fault diagnosis of rolling bearing’s early weak fault based on minimum entropy de-convolution and fast Kurtogram algorithm. Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. 229, 2890–2907 (2015)
Gu, X., Yang, S., Liu, Y., Hao, R.: Rolling element bearing faults diagnosis based on kurtogram and frequency domain correlated kurtosis. Measur. Sci. Technol. 27, 125019 (2016)
Wang, Y., Tse, P.W., Tang, B., Qin, Y., Deng, L., Huang, T.: Kurtogram manifold learning and its application to rolling bearing weak signal detection. Measurement 127, 533–545 (2018)
Yang, X.S.: Harmony search as a metaheuristic algorithm. In: Geem, Z.W. (eds) Music-Inspired Harmony Search Algorithm. Studies in Computational Intelligence, vol. 191, pp. 1–14. Springer, Berlin, Heidelberg (2009). https://doi.org/10.1007/978-3-642-00185-7_1
Zhang, T., Geem, Z.W.: Review of harmony search with respect to algorithm structure. Swarm Evol. Comput. 48, 31–43 (2019)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Ahsan, M., Bismor, D. (2022). Early-Stage Faults Detection Using Harmony Search Algorithm and STFT-Based Spectral Kurtosis. In: Szewczyk, R., Zieliński, C., Kaliczyńska, M. (eds) Automation 2022: New Solutions and Technologies for Automation, Robotics and Measurement Techniques. AUTOMATION 2022. Advances in Intelligent Systems and Computing, vol 1427. Springer, Cham. https://doi.org/10.1007/978-3-031-03502-9_8
Download citation
DOI: https://doi.org/10.1007/978-3-031-03502-9_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-03501-2
Online ISBN: 978-3-031-03502-9
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)