Abstract
Modelling and real-time control methods continue to face major challenges like the lack of models capable of accurately replicating the physical systems while integrating real-time manufacturing data. In this context, the digital twin has widely emerged to address this challenge to connect the physical and digital worlds. The interdependent combination of digital model and physical assets must be harmonized with one another to work efficiently. For this reason, the virtual model needs to be thoroughly evaluated and validated before implementing it in the general framework. In this paper, we discuss the different modelling methods for the virtual model and the various approaches to validate its use in literature.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Shao, G., Jain, S., Laroque, C., Lee, L.H., Lendermann, P., Rose, O.: Digital twin for smart manufacturing: the simulation aspect. In: Proceeding 2019 Winter Simulation Conference (WSC), pp. 2085–2098 https://doi.org/10.1109/WSC40007.2019.9004659(2019)
Brenner, B., Hummel, V.: Digital twin as enabler for an innovative digital shopfloor management system in the ESB logistics learning factory at Reutlingen—University. Procedia Manuf. 9, 198–205 (2017)
Schluse, M., Rossmann, J.: From simulation to experimentable digital twins: Simulation-based development and operation of complex technical systems. In: Proceeding of IEEE International Symposium on Systems Engineering (ISSE), pp. 1–6 (2016)
Qi, Q., Tao, F.: Digital twin and big data towards smart manufacturing and industry 4.0: 360 degree comparison. IEEE Access 6, 3585–3593 (2018)
Tao, F., Zhang, H., Liu, A., Nee, Y.C.: Digital twin in industry: state-of-the-art. IEEE Trans. Ind. Inform. 15(4), 2405–2415 (2019)
Tao, F., et al.: Digital twin-driven product design framework. Int. J. Prod. Res. 57(12), 3935–3953 (2019)
Bhatti, G., Mohan, H., Raja Singh, R.: Towards the future of smart electric vehicles: digital twin technology. Renew. Sustain. Energy Rev. 141, 110801 (2021). https://doi.org/10.1016/j.rser.2021.110801
Rosen, R., von Wichert, G., Lo, G., Bettenhausen, K.D.: About the importance of autonomy and digital twins for the future of manufacturing. IFAC Papers 48(3), 567–572 (2015)
Moreno, A., Velez, G., Ardanza, A., Barandiaran, I., de Infante, Á.R., Chopitea, R.: Virtualisation process of a sheet metal punching machine within the Industry 4.0 vision. Int. J. Interact. Des. Manuf. IJIDeM 11(2), 365–373 (2017)
Yun, S., Park, J.-H., Kim, W.-T.: Data-centric middleware based digital twin platform for dependable cyber-physical systems. In: 9th International Conference on Ubiquitous Future Networks ICUFN (2017)
Xu, Y., Sun, Y., Liu, X., Zheng, Y.: A digital-twin-assisted fault diagnosis using deep transfer learning. IEEE Access 7, 19990–19999 (2019)
Venkatesan, S., Manickavasagam, K., Tengenkai, N., Vijayalakshmi, N.: Health monitoring and prognosis of electric vehicle motor using intelligent-digital twin. IET Electr. Power Appl. 13(9), 1328–1335 (2019)
Ritto, T.G., Rochinha, F.A.: Digital twin, physics-based model, and machine learning applied to damage detection in structures. Mech. Syst. Sig. Process. 155, 107614 (2021). https://doi.org/10.1016/j.ymssp.2021.107614
Gao, C., Park, H., Easwaran, A.: An anomaly detection framework for digital twin driven cyber-physical systems. In: Proceedings of ACM/IEEE 12th International Conference on Cyber-Physical Systems, Nashville Tennessee, pp. 44–54 (2021)
Smarslok, B., Culler, A.J., Mahadevan, S.: Error quantification and confidence assessment of aerothermal model predictions for hypersonic aircraft. In: 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference (2021). https://doi.org/10.2514/6.2012-1817
Martinez, G.S., Sierla, S., Karhela, T., Vyatkin, V.: Automatic generation of a simulation-based digital twin of an industrial process plant. In: IECON 2018—44th Annual Conference of the IEEE Industrial Electronics Society, pp. 3084–3089. Washington, DC (2018)
Scott-Emuakpo, O., et al.: Material property determination of vibration fatigued DMLS and cold-rolled nickel alloys. In: Proceeding of Conference: International Gas Turbine Institute Turbo Expo 2014. Dusseldorf, Germany (2014). https://doi.org/10.1115/GT2014-26247
Kunath, M., Winkler, H.: Integrating the digital twin of the manufacturing system into a decision support system for improving the order management process. Procedia CIRP 72, 225–231 (2018). https://doi.org/10.1016/j.procir.2018.03.192
Mathias, O., Gerrit, W., Oliver, D., Benjamin, L., Markus, S., Leon, U.: Automatic model generation for virtual commissioning based on plant engineering data. IFAC Proc. 47(3), 11635–11640 (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Abdoune, F., Cardin, O., Nouiri, M., Castagna, P. (2022). About Perfection of Digital Twin Models. In: Borangiu, T., Trentesaux, D., Leitão, P., Cardin, O., Joblot, L. (eds) Service Oriented, Holonic and Multi-agent Manufacturing Systems for Industry of the Future. SOHOMA 2021. Studies in Computational Intelligence, vol 1034. Springer, Cham. https://doi.org/10.1007/978-3-030-99108-1_7
Download citation
DOI: https://doi.org/10.1007/978-3-030-99108-1_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-99107-4
Online ISBN: 978-3-030-99108-1
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)