Abstract
Carbon-based nanomaterials are showing promising potential in a variety of applications. Owing to their distinctive structure, multiwalled carbon nanotubes (MWCNTs) posses unique thermal, mechanical, and optical properties. These properties allowed MWCNTs to surpass other nanomaterials when it comes to nanofluids’ applications. They are proven to have a significant role in the overall fluid thermophysical characteristics. This role can either be in compliance with the application requirements or not. Besides, this role’s scale depends on the magnitude of the interaction between the MWCNTs and the base fluid molecules. In this chapter, the underlying mechanisms that govern these interactions are discussed, focusing on nanofluid stability, thermal conductivity, heat capacity, wettability, and rheological properties. Besides, two main applications of MWCNT-based nanofluids in metal cutting and solar energy are provided. This work aims to provide an in-depth and holistic understanding of MWCNT-based nanofluid properties and how these properties affect the nanofluid performance in different applications.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Abbas AT et al (2020) An adaptive design for cost, quality and productivity-oriented sustainable machining of stainless steel 316. J Mater Res Technol 9(6):14568–14581. https://doi.org/10.1016/j.jmrt.2020.10.056
Abubakr M, Amein H et al (2020a) An intuitive framework for optimizing energetic and exergetic performances of parabolic trough solar collectors operating with nanofluids. Renew Energy. https://doi.org/10.1016/j.renene.2020.04.160
Abubakr M, Abbas AT et al (2020b) Sustainable and smart manufacturing: an integrated approach. Sustain For 12(6):2280. https://doi.org/10.3390/su12062280
Adewumi G et al (2018) Investigation of the viscosity and stability of green nanofluids from coconut fibre carbon nanoparticles: effect of temperature and mass fraction, July
Ahmadi MH et al (2018) Solar power technology for electricity generation: a critical review. Energy Sci Eng 6(5):340–361. https://doi.org/10.1002/ese3.239
Amiri A et al (2015) Transformer oil based multi-walled carbon nanotube-hexylamine coolant with optimized electrical, thermal and rheological enhancements. RSC Adv 5(130):107222–107236. https://doi.org/10.1039/c5ra17687e
Arranz-Andrés J, Blau WJ (2008) Enhanced device performance using different carbon nanotube types in polymer photovoltaic devices. Carbon 46(15):2067–2075. https://doi.org/10.1016/j.carbon.2008.08.027
Babar H, Ali HM (2019) Towards hybrid nanofluids: preparation, thermophysical properties, applications, and challenges. J Mol Liq 281(February):598–633. https://doi.org/10.1016/j.molliq.2019.02.102
Babchin AJ, Schramm LL (2012) Osmotic repulsion force due to adsorbed surfactants. Colloids Surf B: Biointerfaces 91(1):137–143. https://doi.org/10.1016/j.colsurfb.2011.10.050
Balandin AA (2011) Thermal properties of graphene and nanostructured carbon materials. Nat Mater 10(8):569–581. https://doi.org/10.1038/nmat3064
Berber S, Kwon Y-K, Tománek D (2000) Unusually high thermal conductivity of carbon nanotubes. Phys Rev Lett 84(20):4613–4616. https://doi.org/10.1103/PhysRevLett.84.4613
Blake T, De Coninck J (2002) The influence of solid–liquid interactions on dynamic wetting. Adv Colloid Interf Sci 96(1–3):21–36. https://doi.org/10.1016/S0001-8686(01)00073-2
Brinksmeier E et al (1999) Aspects of cooling lubrication reduction in machining advanced materials. Proc Inst Mech Eng B 213(8):769–778. https://doi.org/10.1243/0954405991517209
Chen H et al (2009a) Predicting thermal conductivity of liquid suspensions of nanoparticles (nanofluids) based on rheology. Particuology 7(2):151–157. https://doi.org/10.1016/j.partic.2009.01.005
Chen H, Ding Y, Lapkin A (2009b) Rheological behaviour of nanofluids containing tube / rod-like nanoparticles. Powder Technol 194(1–2):132–141. https://doi.org/10.1016/j.powtec.2009.03.038
Chevalier J, Tillement O, Ayela F (2009) Structure and rheology of SiO2 nanoparticle suspensions under very high shear rates. Phys Rev E Stat Nonlinear Soft Matter Phys 80(5):1–7. https://doi.org/10.1103/PhysRevE.80.051403
Chieruzzi M et al (2013) Effect of nanoparticles on heat capacity of nanofluids based on molten salts as PCM for thermal energy storage. Nanoscale Res Lett 8(1):1–9. https://doi.org/10.1186/1556-276X-8-448
Choi SS, Eastman AA (1995) Enhancing thermal conductiivity of fluids with nanoparticles. In: International mechanical engineering congress and exhibition. ASME Puplications FED, San Francisco
Choi SUS et al (2002) Anomalous thermal conductivity enhancement in nanotube suspensions. Appl Phys Lett 79(14):2252–2254. https://doi.org/10.1063/1.1408272
De Robertis E et al (2012) Application of the modulated temperature differential scanning calorimetry technique for the determination of the specific heat of copper nanofluids. Appl Therm Eng 41:10–17. https://doi.org/10.1016/j.applthermaleng.2012.01.003
Devarajan M et al (2018) Thermophysical properties of CNT and CNT/Al2O3 hybrid nanofluid. Micro Nano Lett 13(5):617–621. https://doi.org/10.1049/mnl.2017.0029
Ding Y et al (2006) Heat transfer of aqueous suspensions of carbon nanotubes (CNT nanofluids). Int J Heat Mass Transf 49(1–2):240–250. https://doi.org/10.1016/j.ijheatmasstransfer.2005.07.009
Ekinovic S, Prcanovic H, Begovic E (2015) Investigation of influence of MQL machining parameters on cutting forces during MQL turning of carbon steel St52-3. Proc Eng 132:608–614. https://doi.org/10.1016/j.proeng.2015.12.538
El-Hofy H (2018) Machining processes. In: Fundamentals of machining processes, 3rd edn. CRC Press/Taylor & Francis Group, Boca Raton, pp 1–15. https://doi.org/10.1201/9780429443329-1
Firouzfar E et al (2011) Energy saving in HVAC systems using nanofluid. Appl Therm Eng 31(8–9):1543–1545. https://doi.org/10.1016/j.applthermaleng.2011.01.029
Fuller EJ et al (2014) Mean free paths in single-walled carbon nanotubes measured by kelvin probe force microscopy. Phys Rev B: Condens Matter Mater Phys 89(24):1–6. https://doi.org/10.1103/PhysRevB.89.245450
Gajrani KK et al (2019) Thermal, rheological, wettability and hard machining performance of MoS2 and CaF2 based minimum quantity hybrid nano-green cutting fluids. J Mater Process Technol 266:125–139. https://doi.org/10.1016/j.jmatprotec.2018.10.036
Gan Y, Qiao L (2012) Optical properties and radiation-enhanced evaporation of nanofluid fuels containing carbon-based nanostructures. Energy Fuel 26(7):4224–4230. https://doi.org/10.1021/ef300493m
Gao T et al (2019) Dispersing mechanism and tribological performance of vegetable oil-based CNT nanofluids with different surfactants. Tribol Int 131:51–63. https://doi.org/10.1016/j.triboint.2018.10.025
Garg P et al (2009) An experimental study on the effect of ultrasonication on viscosity and heat transfer performance of multi-wall carbon nanotube-based aqueous nanofluids. Int J Heat Mass Transf 52(21–22):5090–5101. https://doi.org/10.1016/j.ijheatmasstransfer.2009.04.029
Ghozatloo A, Rashidi AM, Shariaty-Niasar M (2014) Effects of surface modification on the dispersion and thermal conductivity of CNT/water nanofluids. Int Commun Heat Mass Transfer 54:1–7. https://doi.org/10.1016/j.icheatmasstransfer.2014.02.013
Gorji TB, Ranjbar AA (2017) A review on optical properties and application of nanofluids in direct absorption solar collectors (DASCs). Renew Sust Energ Rev 72:10–32. https://doi.org/10.1016/j.rser.2017.01.015
Gorji TB, Ranjbar AA, Mirzababaei SN (2015) Optical properties of carboxyl functionalized carbon nanotube aqueous nanofluids as direct solar thermal energy absorbers. Sol Energy 119:332–342. https://doi.org/10.1016/j.solener.2015.07.012
Grzesik W (2008) Advanced machining processes of metallic materials. https://doi.org/10.1016/B978-0-08-044534-2.X5001-2
Guerrini G et al (2018) Dry grinding of gears for sustainable automotive transmission production. J Clean Prod 176:76–88. https://doi.org/10.1016/j.jclepro.2017.12.127
Halelfadl S et al (2013) Viscosity of carbon nanotubes water-based nanofluids: influence of concentration and temperature. Int J Therm Sci 71:111–117. https://doi.org/10.1016/j.ijthermalsci.2013.04.013
Hassan MA, Banerjee D (2019) A soft computing approach for estimating the specific heat capacity of molten salt-based nanofluids. J Mol Liq 365–375. https://doi.org/10.1016/j.molliq.2019.02.106
Hegab H, Umer U, Soliman M et al (2018a) Effects of nano-cutting fluids on tool performance and chip morphology during machining Inconel 718. Int J Adv Manuf Technol 96(9–12):3449–3458. https://doi.org/10.1007/s00170-018-1825-0
Hegab H et al (2018b) Multi-objective optimization during machining Ti-6Al-4V using nano-fluids. In: Progress in Canadian mechanical engineering. York University Libraries. https://doi.org/10.25071/10315/35212
Hegab H, Umer U, Deiab I et al (2018c) Performance evaluation of Ti–6Al–4V machining using nano-cutting fluids under minimum quantity lubrication. Int J Adv Manuf Technol 95(9–12):4229–4241. https://doi.org/10.1007/s00170-017-1527-z
Hegab H, Darras B, Kishawy HA (2018d) Sustainability assessment of machining with nano-cutting fluids. Proc Manuf 26:245–254. https://doi.org/10.1016/j.promfg.2018.07.033
Hegab H et al (2019) A model for machining with nano-additives based minimum quantity lubrication. Int J Adv Manuf Technol 102(5–8):2013–2028. https://doi.org/10.1007/s00170-019-03294-0
Hemmat Esfe M, Rostamian H, Reza Sarlak M (2018) A novel study on rheological behavior of ZnO-MWCNT/10w40 nanofluid for automotive engines. J Mol Liq 254:406–413. https://doi.org/10.1016/j.molliq.2017.11.135
Hordy N et al (2014) High temperature and long-term stability of carbon nanotube nanofluids for direct absorption solar thermal collectors. Sol Energy 105:82–90. https://doi.org/10.1016/j.solener.2014.03.013
Hotze EM, Phenrat T, Lowry GV (2010a) Nanoparticle aggregation: challenges to understanding transport and reactivity in the environment. J Environ Qual 39(6):1909–1924. https://doi.org/10.2134/jeq2009.0462
Hotze EM, Phenrat T, Lowry GV (2010b) Nanoparticle aggregation: challenges to understanding transport and reactivity in the environment. J Environ Qual 39(6):1909. https://doi.org/10.2134/jeq2009.0462
Huaqing X et al (2011) Discussion on the thermal conductivity enhancement of nanofluids. Nanoscale Res Lett 6:1–12. https://doi.org/10.1186/1556-276X-6-124
Hussein AM et al (2014) Heat transfer enhancement with nanofluids – a review. J Mech Eng Sci. https://doi.org/10.15282/jmes.4.2013.9.0042
Hwang Y et al (2011) Effect of the size and morphology of particles dispersed in nano-oil on friction performance between rotating discs. J Mech Sci Technol 25(11):2853–2857. https://doi.org/10.1007/s12206-011-0724-1
Ihly R et al (2016) Efficient charge extraction and slow recombination in organic–inorganic perovskites capped with semiconducting single-walled carbon nanotubes. Energy Environ Sci 9(4):1439–1449. https://doi.org/10.1039/C5EE03806E
Ilyas SU, Pendyala R, Narahari M (2017) Stability and thermal analysis of MWCNT-thermal oil-based nanofluids. Colloids Surf A Physicochem Eng Asp 527:11–22. https://doi.org/10.1016/j.colsurfa.2017.05.004
Incropera FP et al (2007) Fundamentals of heat and mass transfer, 6th edn. https://doi.org/10.1016/j.applthermaleng.2011.03.022
James Clerk M (1873) A treatise on electricity and magnetism. https://doi.org/10.1017/CBO9780511709333
Jamil M et al (2019) Effects of hybrid Al2O3-CNT nanofluids and cryogenic cooling on machining of Ti–6Al–4V. Int J Adv Manuf Technol 102(9–12):3895–3909. https://doi.org/10.1007/s00170-019-03485-9
Jang SP, Choi SUS (2004) Role of Brownian motion in the enhanced thermal conductivity of nanofluids. Appl Phys Lett 84(21):4316–4318. https://doi.org/10.1063/1.1756684
Jiang H, Zhang Q, Shi L (2015) Effective thermal conductivity of carbon nanotube-based nanofluid. J Taiwan Inst Chem Eng 55(April):76–81. https://doi.org/10.1016/j.jtice.2015.03.037
Karthikeyan A, Coulombe S, Kietzig AM (2017) Wetting behavior of multi-walled carbon nanotube nanofluids. Nanotechnology 28(10):105706. https://doi.org/10.1088/1361-6528/aa5a5f
Kasaeian A et al (2017) Experimental investigation on the thermal behavior of nanofluid direct absorption in a trough collector. J Clean Prod 158:276–284. https://doi.org/10.1016/j.jclepro.2017.04.131
Kasaeian A et al (2019) Evaluation of MWCNT/ethylene glycol nanofluid flow in a parabolic trough collector with glass-glass absorber tube. Int J Numer Methods Heat Fluid Flow 30(1):176–205. https://doi.org/10.1108/HFF-11-2018-0693
Keblinski P et al (2001) Mechanisms of heat flow in suspensions of nano-sized particles (nanofluids). Int J Heat Mass Transf. https://doi.org/10.1016/S0017-9310(01)00175-2
Khalid M et al (2011) Stability and thermal conductivity enhancement of carbon nanotube nanofluid using gum arabic. J Exp Nanosci 6(6):567–579. https://doi.org/10.1080/17458080.2010.487229
Khalil W et al (2018) Thermal and rheological properties of industrial mineral gear oil and paraffinic oil/CNTs nanolubricants. Iran J Sci Technol Trans Mech Eng 42(4):355–361. https://doi.org/10.1007/s40997-017-0103-3
Kishawy H, Hegab H, Saad E (2018) Design for sustainable manufacturing: approach, implementation, and assessment. Sustain For 10(10):3604. https://doi.org/10.3390/su10103604
Kiu SSK et al (2017) Comparison on tribological properties of vegetable oil upon addition of carbon based nanoparticles. IOP Conf Ser: Mater Sci Eng 206(1). https://doi.org/10.1088/1757-899X/206/1/012043
Law KY, Zhao H (2015) Surface wetting: characterization, contact angle, and fundamentals. https://doi.org/10.1007/978-3-319-25214-8
Lee SH, Jang SP (2013) Extinction coefficient of aqueous nanofluids containing multi-walled carbon nanotubes. Int J Heat Mass Transf 67:930–935. https://doi.org/10.1016/j.ijheatmasstransfer.2013.08.094
Lee K et al (2009) Understanding the role of nanoparticles in nano-oil lubrication. Tribol Lett 35(2):127–131. https://doi.org/10.1007/s11249-009-9441-7
Lu MC, Huang CH (2013) Specific heat capacity of molten salt-based alumina nanofluid. Nanoscale Res Lett 8(1):1–7. https://doi.org/10.1186/1556-276X-8-292
Luo Y, Zhao R, Pendry JB (2014) van der Waals interactions at the nanoscale: the effects of nonlocality. Proc Natl Acad Sci 111(52):18422–18427. https://doi.org/10.1073/pnas.1420551111
McBain JW (1925) The apparent viscosity of colloidal solutions and a theory of neutral colloids as solvated micelles capable of aggregation. J Phys Chem 30(2):239–247. https://doi.org/10.1021/j150260a005
Mia M, Dhar NR (2019) Influence of single and dual cryogenic jets on machinability characteristics in turning of Ti-6Al-4V. Proc Inst Mech Eng B 233(3):711–726. https://doi.org/10.1177/0954405417737581
Mohamed A et al (2017) Experimental investigations of rheological behaviour and thermal conductivity of nanogrease. Ind Lubr Tribol 69(4):559–565. https://doi.org/10.1108/ILT-08-2016-0176
Mohammadi SK, Etemad SG, Thibault J (2009) Measurement of thermal properties of suspensions of nanoparticles in engine oil. In: Technical proceedings of the 2009 NSTI nanotechnology conference and expo, NSTI-Nanotech 2009, vol 3, pp 74–77
Murshed SMS, Leong KC, Yang C (2008) Investigations of thermal conductivity and viscosity of nanofluids. Int J Therm Sci 47(5):560–568. https://doi.org/10.1016/j.ijthermalsci.2007.05.004
Prasher R, Phelan PE, Bhattacharya P (2006) Effect of aggregation kinetics on the thermal conductivity of nanoscale colloidal solutions (nanofluid). Nano Lett 6(7):1529–1534. https://doi.org/10.1021/nl060992s
Qiao G et al (2019) Mechanism of specific heat capacity enhancement of molten salts based nanofluids for thermal energy storage – a molecular study. In: 2019 Offshore Energy Storage Summit, OSES 2019, pp 1–7. https://doi.org/10.1109/OSES.2019.8867356
Qu J et al (2020) Graphene oxide/multi-walled carbon nanotube – therminol®66 hybrid nanofluids for low-to-medium temperature volumetric solar collectors. Int J Energy Res 44(9):7216–7228. https://doi.org/10.1002/er.5420
Radiom M, Yang C, Chan, W. K. (2010) Characterization of surface tension and contact angle of nanofluids. In: Fourth international conference on experimental mechanics, vol 7522, p 75221D. https://doi.org/10.1117/12.851278
Rajmohan T, Sathishkumar SD, Palanikumar K (2017) Effect of a nanoparticle-filled lubricant in turning of AISI 316L stainless steel (SS). Part Sci Technol. https://doi.org/10.1080/02726351.2016.1146812
Raju RA, Andhare A, Sahu NK (2017) Performance of multi-walled carbon nanotube-based nanofluid in turning operation. Mater Manuf Process 32(13):1490–1496. https://doi.org/10.1080/10426914.2017.1279291
Sani E et al (2010) Carbon nanohorns-based nanofluids as direct sunlight absorbers. Opt Express 18(5):5179. https://doi.org/10.1364/oe.18.005179
Sefiane K, Skilling J, MacGillivray J (2008) Contact line motion and dynamic wetting of nanofluid solutions. Adv Colloid Interf Sci 138(2):101–120. https://doi.org/10.1016/j.cis.2007.12.003
Shin D, Banerjee D (2011a) Enhanced specific heat of silica nanofluid. J Heat Transf 133(2):1–4. https://doi.org/10.1115/1.4002600
Shin D, Banerjee D (2011b) Enhancement of specific heat capacity of high-temperature silica-nanofluids synthesized in alkali chloride salt eutectics for solar thermal-energy storage applications. Int J Heat Mass Transf 54(5–6):1064–1070. https://doi.org/10.1016/j.ijheatmasstransfer.2010.11.017
Singh RK, Sharma AK, Dixit AR, Mandal A et al (2017a) Experimental investigation of thermal conductivity and specific heat of nanoparticles mixed cutting fluids. Mater Today: Proc 4(8):8587–8596. https://doi.org/10.1016/j.matpr.2017.07.206
Singh RK, Sharma AK, Dixit AR, Tiwari AK et al (2017b) Performance evaluation of alumina-graphene hybrid nano-cutting fluid in hard turning. J Clean Prod. https://doi.org/10.1016/j.jclepro.2017.06.104
Singh T et al (2018) Machining performance investigation of AISI 304 austenitic stainless steel under different turning environments. Int J Automot Mech Eng 15(4):5837–5862
Singh T, Dureja JS, Dogra M, Bhatti MS (2019a) Multi-response optimization in environment friendly turning of AISI 304 austenitic stainless steel. Multidiscip Model Mater Struct 15(3):538–558. https://doi.org/10.1108/MMMS-07-2018-0139
Singh T, Dureja JS, Dogra M, Bhatti MS et al (2019b) Multi-response optimization in environment friendly turning of AISI 304 austenitic stainless steel. Multidiscip Model Mater Struct 15(3):538–558. https://doi.org/10.1016/j.jclepro.2018.09.150
Sis H, Birinci M (2009) Effect of nonionic and ionic surfactants on zeta potential and dispersion properties of carbon black powders. Colloids Surf A Physicochem Eng Asp 341(1–3):60–67. https://doi.org/10.1016/j.colsurfa.2009.03.039
Starace AK et al (2011) Nanofluid heat capacities. J Appl Phys 110(12):124323. https://doi.org/10.1063/1.3672685
Strano MS et al (2003) The role of surfactant adsorption during ultrasonication in the dispersion of single-walled carbon nanotubes. J Nanosci Nanotechnol 3(1):81–86. https://doi.org/10.1166/jnn.2003.194
Suhaimi NS et al (2020) Optimum electrical and dielectric performance of multi-walled carbon nanotubes doped disposed transformer oil. Energies 13(12). https://doi.org/10.3390/en13123181
Tam NT et al (2020) Carbon nanomaterial-based nanofluids for direct thermal solar absorption. Nano 10(6):1–39. https://doi.org/10.3390/nano10061199
Tchalala MR, Anjum DH, Chaieb S (2016) Effect of ionic liquid (emim BF 4 ) on the dispersion of gold nanoparticles. J Phys Conf Ser 758(1):012020. https://doi.org/10.1088/1742-6596/758/1/012020
Vaisman L, Wagner HD, Marom G (2006) The role of surfactants in dispersion of carbon nanotubes. Adv Colloid Interf Sci 128–130(2006):37–46. https://doi.org/10.1016/j.cis.2006.11.007
Wang X, Barnett A (2019) The evolving value of photovoltaic module efficiency. Appl Sci (Switzerland) 9(6). https://doi.org/10.3390/app9061227
Wang Y et al (2017) Comparative evaluation of the lubricating properties of vegetable-oil-based nanofluids between frictional test and grinding experiment. J Manuf Process 26:94–104. https://doi.org/10.1016/j.jmapro.2017.02.001
Worthen AJ et al (2016) Steric stabilization of nanoparticles with grafted low molecular weight ligands in highly concentrated brines including divalent ions. Soft Matter 12(7):2025–2039. https://doi.org/10.1039/c5sm02787j
Xue L et al (2004) Effect of liquid layering at the liquid-solid interface on thermal transport. Int J Heat Mass Transf 47(19–20):4277–4284. https://doi.org/10.1016/j.ijheatmasstransfer.2004.05.016
Yang B, Han ZH (2006) Temperature-dependent thermal conductivity of nanorod-based nanofluids. Appl Phys Lett 89(8):1–4. https://doi.org/10.1063/1.2338424
Yu W, Xie H (2012) A review on nanofluids: preparation, stability mechanisms, and applications. J Nanomater 2012. https://doi.org/10.1155/2012/435873
Zhang Y et al (2015) Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding. Int J Mach Tools Manuf 99:19–33. https://doi.org/10.1016/j.ijmachtools.2015.09.003
Zhou SQ, Ni R (2008) Measurement of the specific heat capacity of water-based Al2 O3 nanofluid. Appl Phys Lett 92(9):1–4. https://doi.org/10.1063/1.2890431
Zhou SQ et al (2009) On the specific heat capacity of CuO nanofluid. Appl Phys Lett 92(12):74–77. https://doi.org/10.1155/2010/172085
Acknowledgments
The authors gratefully acknowledge the financial support of the Egyptian Academy of Scientific Research and Technology (ASRT).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 Springer Nature Switzerland AG
About this entry
Cite this entry
Abubakr, M., Hegab, H., Osman, T.A., Elharouni, F., Kishawy, H.A., Esawi, A.M.K. (2022). Carbon Nanotube–Based Nanofluids. In: Abraham, J., Thomas, S., Kalarikkal, N. (eds) Handbook of Carbon Nanotubes. Springer, Cham. https://doi.org/10.1007/978-3-030-91346-5_32
Download citation
DOI: https://doi.org/10.1007/978-3-030-91346-5_32
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-91345-8
Online ISBN: 978-3-030-91346-5
eBook Packages: Physics and AstronomyReference Module Physical and Materials ScienceReference Module Chemistry, Materials and Physics