Abstract
The paper describes a brief evolution history of non-circular gears started from the 14th century, the main gear parameters and 5 models with non-circular gears from BMSTU mechanism collection. The authors compare different calculation methods for a complex profile of a non-circular tooth and present innovative technologies for its manufacturing based on 3D prototyping and printing, electric discharge processing as well as others. The very special attention is paid to Faydor Litvin, one of the founders of the gearing theory and non-circular gears, in particular. Non-circular gears were not widespread in the past, but this changed: increasingly becoming popularity leads to the creation of new machines. Finally, some examples of successful application of non-circular gears are shown.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Moon, F.: The Machines of Leonardo Da Vinci and Franz Reuleaux: Kinematics of Machines from the Renaissance to the 20th Century. History of Mechanism and Machine Science, vol. 2, pp. 239–241. Springer, Dordrecht (2007).https://doi.org/10.1007/978-1-4020-5599-7
Moon, F., et al.: Ferdinand Redtenbacher (1809–1863): pioneer in scientific machine engineering. Mech. Mach. Theory 44(9), 1607–1626 (2009)
Golovin, A., Tarabarin, V.B.: Russian Model from the Mechanisms Collection of Bauman University, 245. Springer, Dordrecht (2008). https://doi.org/10.1007/978-1-4020-8776-9
Litvin, F.: Noncircular Gears: Design and Generation. University Press, Cambridge (2009)
Robinson S.: Principles of Mechanism. A Treatise on the Modification of Motion by Means of the Elementary Combinations of Mechanism, or of the Parts of Machines. Wiley, New York (1896)
I-Kan, A., Belyaev, A.: Cutting non-circular gears. In: Theory and Practice of Gears. Proceedings of the International Conference. Izhevsk: Izhevsk State Technical University, pp. 369–372 (1998)
Litvin F.L.: A life dedicated to the development of the modern theory of gearing. In: American Period. Proceedings of international symposium “Theory and Practice of Gearing”, pp. 9–14 (2014)
Balbayev, G., Ceccarelli, M.: An experimental test validation of a non-circular gear train. In: Proceedings of International Symposium “Theory and Practice of Gearing”, pp. 96–103 (2014)
Prikhodko, A., Smelyagin, A.: Creation and research of planetary mechanisms of intermittent motion with elliptical gear wheels. J. Bull. BMSTU Ser. Mech. Eng. (2019)
Voronov, S.A., Ivanov, I.I., Kiselev, I.A.: Investigation of the milling process based on a reduced dynamic model of cutting tool. J. Mach. Manufact. Reliab. 44(1), 70–78 (2015). https://doi.org/10.3103/S1052618815010100
Polyakov, S.A., Kuksenova, L.I., Alekseeva, M.S.: Methodological foundations for choosing the materials for gears according to wear resistance criteria. J. Mach. Manufact. Reliab. 48(4), 328–335 (2019). https://doi.org/10.3103/S1052618819040125
Smirnov, A.E., Mokhova, A.S., Semenov, M.Y., Kuksenova, L.I., Fakhurtdinov, R.S.: Mixed-surface impregnation of gear wheels made of 13Kh3N3M2VFB-Sh age-hardenable integrally alloyed steel aimed at improving surface hardness, wear-resistance, and back-to-back endurance. J. Mach. Manufact. Reliab. 46(4), 404–408 (2017). https://doi.org/10.3103/S1052618817040173
Grubyi, S., Chaevskiy, P.: Improving efficiency of machining of grooves on shafts of increased hardness structural steel. Lect. Notes Mech. Eng.921–929 (2020)
Artobolevsky, I.: Mechanisms in Modern Technology. Lenand Publishing, Moscow (2019)
Polyakov, S., Kuksenova, L.: Methods for estimating the adaptive properties of mechanical systems as means of improving their performance indicators. Probl. Mech. Eng. Mach. Reliab. 46(1), 20–24 (2017)
Egorova, O., Samsonov, K., Sevryukova, A.: New trend in learning through 3D modeling of historical mechanism’s model explorations in the history of machines and mechanisms. In: Proceedings of the Fifth IFToMM Symposium on the History of Machines and Mechanisms, pp. 137–150. Springer (2016)
Egorova, O.V., Vukolov, A.Y.: Challenges of 3D mechanisms models in TMM training IREME. Int. Rev. Mech. Eng. 10(5), 303–311 (2016)
Sustainable Development Goal 4. https://en.wikipedia.org/wiki/Sustainable_Development_Goal_4. Accessed 14 July 2021
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Egorova, O.V., Barbashov, N.N., Abdullina, L.R., Kiselev, R.M. (2022). Non-circular Gears: Innovative Manufacturing Technologies. In: Quaglia, G., Gasparetto, A., Petuya, V., Carbone, G. (eds) Proceedings of I4SDG Workshop 2021. I4SDG 2021. Mechanisms and Machine Science, vol 108. Springer, Cham. https://doi.org/10.1007/978-3-030-87383-7_62
Download citation
DOI: https://doi.org/10.1007/978-3-030-87383-7_62
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-87382-0
Online ISBN: 978-3-030-87383-7
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)