Abstract
In many occasions in the previous chapters and especially in Chap. 2 “Guide to the Selection of Accessories,” the reader has been advised to consider the compatibility of the Accessory with the Cable (Sect. 2.2), and the compatibility of the Accessory Performance with that of the Cable System (Sect. 2.3).
Pierre Argaut: deceased.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
CIGRE Electra 173 After laying tests on high voltage extruded insulation cable systems (1997)
CIGRE JWG 21/33: Insulation Coordination for HV AC Underground Cable Systems, CIGRE TB 189 (June 2001)
CIGRE SC 23: The Mechanical Effects of Short Circuit Currents in Open Air Substation, CIGRE Technical Brochure No. 105 (October 1996)
CIGRE TF B1.26: Earth Potential Rises in Specially Bonded Screen Systems, TB 347 (2008)
CIGRE WG 21.13: Operating Characteristics of Long Links of AC High Voltage Insulated Cables, Session Report Report 21-13 (1986)
CIGRE WG 21.17: Construction, Laying and Installation Techniques for Extruded and Self Contained Fluid Filled Cable Systems, TB194 (2001)
CIGRE WG 23.03: General Guidelines for the Design of Outdoor AC Substations, TB No. 161 (2000)
CIGRE WG 23.04: Engineering Guide on Earthing Systems in Power Stations, CIGRE Technical Brochure No. 213 (October 2002a)
CIGRE WG 23.04 “Design Guidelines for Power Station Auxiliaries and Distribution Systems” (CIGRE Technical Brochure No 197, February 2002b)
CIGRE WG B1.02: Optimization of Power Transmission Capability of Underground Cable Systems Using Thermal Monitoring, Electra No. 213 (April 2004a)
CIGRE WG B1.02: Optimization of Power Transmission Capability of Underground Cable Systems Using Thermal Monitoring, TB 247 (2004b)
CIGRE WG B1.04: Maintenance of HVAC Underground Cables and Accessories, TB 279 (2005)
CIGRE WG B1.08: Cable Systems in Multipurpose or Shared Structures, TB 403 (2010)
CIGRE WG B1.19: Technical and Environmental Issues Regarding the Integration of a New HV Cable System in the Network, TB 250 (2004)
CIGRE WG B1.23: Impact of EMF on current rating and cable systems, TB 559 (2013)
CIGRE WG B1.30: Cable Systems Electrical Characteristics, TB 531 (2013)
CIGRE WG B1.35: A Guide for Rating Calculations of Insulated Cables, TB 640 (2015)
CIGRE WG B1.41: Long Term Performance of Soil and Backfill of Cable Systems, TB 714 (2017)
CIGRE WG B1.45: Thermal Monitoring of Cable Circuits and Grid Operators use of Dynamic Rating Systems, TB 756 (2019)
CIGRE WG B1.47: Implementation of Long AC HV and EHV Cable Systems, TB 680 (2017)
CIGRE WG B1.48: Trenchless Technologies, TB 770 (2019)
CIGRE WG B1.50: Sheath Bonding Systems of AC Transmission Cables – Design, Testing, and Maintenance, TB 797 (2020)
CIGRE WG B1.51: Fire Issues for Insulated Cables Installed in Air, TB 720 (2018)
CIGRE WG B1.52: Fault Location on Land and Submarine Links [AC and DC], TB 773 (2019)
CIGRE WG B1.56: Power cable rating examples for calculation tool verification TB 880 (2022)
CIGRE WG B1.60: Maintenance of HV Cable Systems, TB 825 (2021)
CIGRE WG C4.204: Mitigation Techniques of Power Frequency Magnetic Fields originated from Electric Power Systems, TB 373 (2009)
IEC 60071: Insulation Coordination. IEC International Standard (1993–12)
IEC 60229: Electric cables - Tests on extruded oversheaths with a special protective function (2007–10)
IEC 60479: Effects of Currents on Human Beings and Livestock. IEC International Standard (2018–12)
IEC 60840: Power Cables with Extruded Insulation and Their Accessories for Rated Voltages Above 30 kV (Um =36 kV) up to 150 kV (Um=170 kV) – Test Methods and Requirements (2020)
IEC 60865: Short-Circuit Currents, Calculation of Effects – Part 1: Definitions and Calculation Methods. IEC International Standard (2011–10)
IEC 60909: Short-Circuit Currents in Three-Phase A.C. Systems. IEC International Standard 2016–01
IEC 62067: Power Cables with Extruded Insulation and Their Accessories for Rated Voltages Above 150 kV (Um=170 kV) up to 500 kV (Um = 550 kV)-Test Methods and Requirements 2022–04
IEEE 80: Guide for Safety in AC Substation Grounding (2013)
IEEE 81: Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Ground System (2012)
IEEE 998: Guide for Direct Lightning Stroke Shielding of Substations (2012)
IEEE standard 1402: Guide for Electric Power Substation Physical and Electronic Security (2021)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 Springer Nature Switzerland AG
About this entry
Cite this entry
Argaut, P. (2023). Accessories in Underground Cable Systems and in Transitions from Overhead to Underground. In: Argaut, P. (eds) Accessories for HV and EHV Extruded Cables. CIGRE Green Books. Springer, Cham. https://doi.org/10.1007/978-3-030-80406-0_1
Download citation
DOI: https://doi.org/10.1007/978-3-030-80406-0_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-80405-3
Online ISBN: 978-3-030-80406-0
eBook Packages: EngineeringReference Module Computer Science and Engineering