Abstract
In this study, the authors proposed an approach for calculating the distribution of the temperature field with simulation at the stages of input and output of an electron beam on the basis of mathematical models of the thermal field, considering the thermophysical parameters of the product material and its geometric dimensions. The approach considered by the authors for calculating the thermal field at the stages of input and output of an electron beam, at the weld seam, based on the developed mathematical models, taking into account the geometric dimensions of the product and the thermophysical parameters of the product material, will reduce the cost of setting up the technological process when welding new material alloys and other thicknesses, and will also reduce the number of defects in the used technological modes in production. Thus, the purpose of the study is to develop a new modeling approach for developing a technological process with its further application for a more conscious choice of technological parameters when developing a new technological process for electron beam welding of other materials and alloys and obtaining a stable quality of a weld. #CSOC1120
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Mastanaiah, P., Sharma, A., Madhusudhan, R.G.: Process parameters-weld bead geometry interactions and their influence on mechanical properties: a case of dissimilar aluminium alloy electron beam welds. Defence Technol. 14, 137–150 (2018)
Wei, H., Yunhui, D., Lianqing, Z., Mingli, D.: Angular sensing system based on Y-type twin-core fiber and reflective varied-line spacing grating fabricated by electron beam lithography. Results Phys. 18, 103193 (2020)
Seregin, Yu.N., Laptenok, V.D., Uspenskiy, N.V., Nikitin, V.P.: Experimental research on the optimization of the technology of electron-beam welding of aluminum alloys. In: Technologies and equipment of EBW-2011 Materials of the St.-Petersburg International Scientific and Technical Conference, Russia, Saint Petersburg, pp. 71–80 (2011)
Kanigalpula, P.K.C., Pratihar, D.K., Jha, M.N., Derose, J., Bapat, A.V., Rudra Pal, A.: Experimental investigations, input-output modeling and optimization for electron beam welding of Cu-Cr-Zr alloy plates. Int. J. Adv. Manuf. Technol. 85(1–4), 711–726 (2015). https://doi.org/10.1007/s00170-015-7964-7
Salomatova, E.S., Trushnikov, D.N., Tsaplin, A.I., Belenkiy, V.Ya.: The high performance computing for research of evaporation during electron beam welding. Bull. PNIPU Aerosp. Eng. 39, 96–108 (2014)
Reich, M., et al.: Real-time beam tracing for control of the deposition location of electron cyclotron wave. Fusion Eng. Des. 100, 73–80 (2015)
Trushnikov, D.N., Belen’kii, V.Y.: Investigation of the formation of the secondary current signal in plasma in electron beam welding with oscillations of the electron beam. Weld. Int. 27(11), 877–880 (2013)
Poli, E., Peeters, A.G., Pereverzev, G.V.: TORBEAM, a beam tracing code for electron-cyclotron waves in tokamak plasmas. Comput. Phys. Commun. 136(1–2), 90–104 (2001)
Seregin, Yu.N., Kurashkin, S.O.: Modeling of the EBW mode for predicting the parameters of the weld. In: MPEI: Collection of Materials of 2nd International Conference, Russia, Moscow, pp. 26–36 (2017)
Permyakov, G.L., Trushnikov, D.N., Belenky, V.Ya., Olshanskaya, T.V.: Numerical modeling of the electron beam welding process with longitudinal beam oscillation. Bull. PNIPU Aerosp. Eng. 39, 139–145 (2015)
Kurashkin, S.O., Laptenok, V.D., Murygin, A.V., Seregin, Yu.N.: Analytical characteristics of the electron beam distribution density over the heated spot for optimizing the electron-beam welding process. IOP Conf. Ser. Mater. Sci. Eng. 681, 012021 (2019)
Rai, R., Palmer, T.A., Elmer, J.W., Debroy, T.: Heat transfer and fluid flow during electron beam welding of 304L stainless steel alloy. Weld. J. 88(3), 54–61 (2009)
Erofeev, V.A., Logvinov, R.V., Nesterenkov, V.M.: Features of the use of the equivalent heat source, taking into account the strain and stress in the process of electron beam welding. Weld. Diagn. 4, 22–26 (2010)
Yazovskikh, V.M.: Model of deep penetration in electron beam welding. Weld. Eng. 20(8), 16–20 (2005)
Seregin, Yu.N., Kurashkin, S.O.: Modeling the thermal process using the temperature functional by electron beam welding. IOP Conf. Ser. Mater. Sci. Eng. 734, 012003 (2020)
Sudniky, W., Radajz, D., Erofeew, W.: Computerized simulation of laser beam welding, modelling and verification. J. Phys. D Appl. Phys. 29(11), 013 (1996)
Cho, W.I., Na, S.J., Thomy, C., Vollertsen, F.: Numerical simulation of molten pool dynamics in high power disk laser welding. J. Mater. Process. Technol. 212(1), 262–275 (2012)
Trushnikov, D., Belenkiy, V., Schavlev, V., Piskunov, A., Abdulin, A., Mladenov, G.: Plasma charge current for control and monitoring at electron beam welding with the beam oscillation. Sensors 12(12), 17433–17445 (2012)
Sudnik, V.A., Erofeev, V.A., Richter, K.-H., Heins, K.-V.: Numerical Modelling of the EBW process. In: Proceedings of International Conference Computer Technology in Welding and Manufacturing & Mathematical Modeling and Information Techhnologies in Welding and Related Processes, Kiev, pp. 295–300 (2000)
Felici, F., et al.: The TCV team: real-time physics-model-based simulation of the current density profile in tokamak plasmas. Nucl. Fusion 51(8), 083052 (2011)
Rykalin, N.N., Zuev, I.V., Uglov, A.A.: Fundamentals of electron beam processing of materials. Mashinostroyeniye, Russia, Moscow (1978)
Nerovny, V.M., Konovalov, A.V., Yakushin, B.F., Makarov, E.L., Kurkin, A.S.: Theory of welding processes. Bauman MSTU, Russia, Moscow (2007)
Acknowledgments
The reported study was funded by RFBR, Government of the Krasnoyarsk Territory and the Regional Science Foundation, project number 19-48-240007 “Mathematical and algorithmic support of the electron-beam welding of thin-walled aerospace structures”.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Kurashkin, S., Tynchenko, V., Murygin, A., Seregin, Y., Tynchenko, V., Bocharov, A. (2021). Modeling the Temperature Field Distribution at the Stages of Input-Output of the Electron Beam. In: Silhavy, R. (eds) Software Engineering and Algorithms. CSOC 2021. Lecture Notes in Networks and Systems, vol 230. Springer, Cham. https://doi.org/10.1007/978-3-030-77442-4_28
Download citation
DOI: https://doi.org/10.1007/978-3-030-77442-4_28
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-77441-7
Online ISBN: 978-3-030-77442-4
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)