Abstract
This research aims to analyze the performance of a solar water heater for space heating in residential and commercial buildings in the city of Quito in Ecuador. The collector system is environmentally friendly since during its operation no greenhouse gases are generated, being these the main causes of global warming produced by the burning of fossil fuels. One of the advantages of this innovation is that it is easy to install and transport. It can be installed outside apartment buildings and homes as if they were windows in the building itself, and its location allows the collector to be kept clean, improving the heating performance of the heat transfer fluid and offering a versatile sustainable building concept that reduces energy consumption. Carrying out tests under different meteorological conditions, the efficiency calculation of the solar air collector was developed, obtaining an average value of 59.09% with an acceptable collector performance, achieving an average useful heat of 3807.65 W and an output temperature of around 34.6 to 94 °C. These important data were obtained through methodologies of: thermal analysis in the collector, energy balances in each section and definition of mathematical models. This efficiency achieved offers good perspectives in the application of this type of technologies that contribute to the use of alternative or renewable energies, since the solar resource can be used to cover the energy demand at low costs.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
Abbreviations
- \( {\rm{A}}_{\rm{col}} \) :
-
Collector area
- \( {\rm{A}}_{\rm{cv}} \) :
-
Glass Cover Area
- \( {\rm{A}}_{\rm{p}} \) :
-
Plate area
- \( {\rm{F}}_{\rm{r}} \) :
-
Heat Removal Factor
- \( BEC\frac{dTc}{dt} \) :
-
Energy that is accumulated in the solar thermal collector
- \( {\rm{h}}_ 1 \) :
-
Heat Transfer Coefficient
- \( {\rm{h}}_ 2 \) :
-
Heat exchange coefficient
- \( {\rm{h}}_ 3 \) :
-
Heat transfer coefficient between the indoor air and cover
- \( {\rm{h}}_ 4 \) :
-
Heat transfer coefficient for radiation between plate and cover (glass)
- \( {\rm{h}}_ 5 \) :
-
Heat transfer coefficient by natural convection between the indoor air and the plate
- \( {\rm{h}}_ 6 \) :
-
Convection heat transfer coefficient between the insulation and the outside air
- ṁ:
-
Mass flow
- \( {\rm{Q}}_ 1 \) :
-
Heat radiated by the absorber plate
- \( {\rm{Q}}_ 2 \) :
-
Hot air convection heat
- \( {\rm{Q}}_ 3 \) :
-
Convection heat to the outside air Q4 Heat from radiation into outer space Q5 Heat delivered to indoor air
- \( {\rm{Q}}_ 4 \) :
-
Heat from radiation into outer space
- \( {\rm{Q}}_ 5 \) :
-
Heat delivered to indoor air
- \( {\rm{Q}}_ 6 \) :
-
Heat that is lost to the environment through insulation of the collector bottom
- \( {\rm{Q}}_ 7 \) :
-
Heat delivered by radiation to the collector cover
- \( Q_u \) :
-
Useful heat
- S:
-
Solar radiation absorbed per unit area
- \( {\rm{T}}_{\rm{pm}} \) :
-
Average plate temperature
- \( {\rm{T}}_{\rm{a}} \) :
-
Room temperature
- \( {\rm{T}}_{\rm{o}} \) :
-
Outlet fluid temperature
- \( {\rm{T}}_{\rm{i}} \) :
-
Fluid temperature at inlet
- \( {\rm{T}}_{\rm{m}} \) :
-
Average temperature between Tp and Ti
- \( {\rm{T}}_{\rm{ai}} \) :
-
Indoor air temperature
- \( {\rm{T}}_{\rm{aex}} \) :
-
Outside air temperature
- \( {\rm{T}}_{\rm{sky}} \) :
-
Sky Dome Temperature
- \( {\rm{T}}_{\rm{aes}} \) :
-
Outside air temperature through insulation
- \( \rm{\tau }_{\rm{cv}} \) :
-
Glass Transmittance
- \( {\rm{U}}_{\rm{L}} \) :
-
Overall thermal loss coefficient of the collector
- \( F_r \) :
-
Heat Removal Factor
- \(\eta \) :
-
Optical efficiency of the collector
References
Ferrer, J.M.I., Salas, J.M.: Dimensionado de un sistema térmico solar mediante simulación y su validación energética. Ingeniería Energética, vol. XXXIV, no. 1, pp. 56–65, January 2013
Victoria Cardozo, J.D.F.F.: Diseño y construcción de un calentador solar didáctico. Revista de la Sociedad Colombiana de Física, vol. 37, no. 2, pp. 338–348 (2005)
Nandwani, S.S.: Energía Solar - Conceptos básicos y su utilización. Universidad Nacional, Heredia, Costa Rica, p. 26, June 2005
Quiñonez, J., Hernández, A., Larsen, S.F.:Evaluación termoenergética de un colector solar calentador de aire de doble paso en contracorriente diseñado para la calefacción de edificios. Avances en Energías Renovables y Medio Ambiente, vol. 16, pp. 55–62 (2012)
Gallegos, H.G., Righini, R.: Ángulo Óptimo para planos colectores de Energía Solar integrados a Edificios. Avances en Energías Renovables y Medio Ambiente, vol. 16, no. 31, p. 7, October 2012
Giraldo, J., Arango, J.P.: Proceso de optimización en el diseño de sistema de calefacción solar pasivo, Revista Técnica “energía”, vol. 16, no. II, pp. 100–110, Enero 2020
Mohamad, A.: High efficiency solar air heater. Solar Energy 60(2), 71–76 (1997)
Pottler, K., Sippel, C.M., Beck, A., Fricke, J.: Optimized finned absorber geometries for solar air heating collectors. Solar Energy 67(1–3), 35–52 (1999)
Ammari, H.D.: A mathematical model of thermal performance of a solar air heater with slats. Renew. Energy 28(10), 1597–1615 (2003)
Kutscher, C.F., Christensen, C.B., Barker, G.M.: Unglazed transpired solar collectors: heat loss theory. J. Solar Energy Eng. 115(3), 182–188 (1993)
Kutscher, C.F.: Heat exchange effectiveness and pressure drop for air flow through perforated plates with and without crosswind. J. Heat Transfer 116(2), 391–399 (1994)
Ramani, B., Gupta, A.V.S., Kumar, R.: Performance of a double pass solar air collector. Solar Energy 84(11), 1929–1937 (2010)
González, S.M., Larsen, S.F., Hernandez, A.: Simulación del comportamiento térmico de un colector solar de aire de doble flujo mediante el software SIMUSOL. In: Comunicaciones del XXXV Congreso de ASADES, Rosario, Santa Fe, October 2019
Lammardo, A., Baritto, M.: Modelo matemático del comportamiento térmico de un colector solar de placas planas inclinadas para calentamiento de aire, Revista Ingeniería UC, vol. 17, no. 3, pp. 19–27, December 2010
Zhang, D., Li, J., Gao, Z., Wang, L., Nan, J.: Thermal performance investigation of modified flat plate solar collector with dual-function. Appl. Therm. Eng. 108, 1126–1135 (2016)
Othman, M.Y., Hamid, S.A., Tabook, M.A.S., Sopian, K., Roslan, M.H., Ibarahim, Z.: Performance analysis of PV/T Combi with water and air heating system: an experimental study. Renew. Energy 86, 716–722 (2016)
Nematollahi, O., Alamdari, P., Assari, M.R.: Experimental investigation of a dual purpose solar heating system. Energy Convers. Manag. 78, 359–366 (2014)
Fauroux, L.E., Jagër, M.: Diseño y Análisis de Colectores Solares Planos. In: Memorias del COINI 2013 UTN FRSR (2013)
Koulibaly, A., Bayón, J.J.G.: Modelación de un colector solar para calentamiento de aire. Ingeniería Energética 36(3), 292–302 (2015)
Quiñonez, J., Hernández, A.: Evaluación y Simulación Computacional de un Modelo físico-matemático el Colector Solar Calentador de Aire de Doble paso en contracorriente diseñado para la calefaccion de Edificios. XXXVI Reunión de Trabajo de la Asociación Argentina de Energías Renovables y Medio, vol. 1, pp. 123–130, October 2013
Fauroux, L.E., Diaz, D.O., Blanco, G.E., Degaetani, O.J.: Modelado, y análisis económico de colectores solares planos,” Revista Digital de Departamento de Ingeniería e Investigaciones Tecnológicas de la Universidad Nacional de la Matanza, vol. 1, no. 1, p. 14, May 2016
Gómez, A.E.Á., Fandiño, J.M.M., Sarmiento, J.F.B.: Evaluación energética de un colector solar de placa plana de doble cubierta, Ingeniería y Desarrollo, no. 27, pp. 93– 112, January 2010
Hernández, A., Salvo, N., Fernández, C., Suloy, H.: Diseño y evaluación térmica de un colector solar calentador de aire de placa perforada para calefacción de edificios. Avances en Energías Renovables y Medio Ambiente, vol. 12, p. 133 (2008)
Hernández, A., Fernández, C., Salvo, N., Suligoy, H.: Diseño, construcción y primeros ensayos de un colector solar calentador de aire de tipo loop convectivo para el calentamiento de edificios. Avances en Energías Renovables y Medio Ambiente, vol. 11, pp. 75–82 (2007)
Acknowledgements
The authors wish to thank the Faculty of Mechanics of SEK International University with the project P041819 Parque de Energias Renovables, for providing the necessary conditions for the experimental process. The Instituto de Investigación Geológico y Energético (IIGE) and the Japan International Cooperation Agency (JICA) are also thanked for the donation of the solar collector.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Arguello Bravo, D.A., Martínez-Gómez, J., Urresta Suárez, E.F., Salazar Loor, D.R., Guerrón, G. (2021). Performance Analysis of a Solar Water Heater for Space Heating in Residential and Commercial Buildings. In: Botto Tobar, M., Cruz, H., Díaz Cadena, A. (eds) Recent Advances in Electrical Engineering, Electronics and Energy. CIT 2020. Lecture Notes in Electrical Engineering, vol 763. Springer, Cham. https://doi.org/10.1007/978-3-030-72212-8_1
Download citation
DOI: https://doi.org/10.1007/978-3-030-72212-8_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-72211-1
Online ISBN: 978-3-030-72212-8
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)