Abstract
Bio-inspired solutions devised for Autonomous Underwater Robots are currently investigated by researchers worldwide as a source of propulsive improvement. Despite the efforts made to pursue the substantial potential payoffs of marine animals’ locomotion, the performances of biological systems are still far to reach. In order to address this very ambitious objective, the authors of this work have designed and manufactured a series of ostraciiform swimming robots in the last three years. However, the aim to pursue the highest propulsive efficiency to maximize the robot autonomy, has driven them to improve their design by moving from ostraciiform to thunniform locomotion. In order to properly size the robot bio-inspired thruster – i.e. the caudal fin – and its actuation system, the performances of a flapping foil have been deeply investigated by means of computational fluid dynamics techniques. The numerical predictions led to the optimal design of a transmission mechanism capable to convert the continuous rotation of a single motor in the harmonic roto-translation of the robot thruster, a motion law closely resembling the fin kinematics in thunniform locomotion. Furthermore, in order to compute the robot resulting motion, the propulsive forces and torque generated by the flapping thruster have been integrated in a multibody model which accounts both for the mass distribution of the robotic fish and the hydrodynamic forces due to the relative motion between its segmented body and the surrounding fluid. The performed dynamic analysis allowed to compute the robot total efficiency in the cruising condition.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Scaradozzi, D., Palmieri, G., Costa, D., Pinelli, A.: BCF swimming locomotion for autonomous underwater robots: a review and a novel solution to improve control and efficiency. Ocean Eng. 130, 437–453 (2017)
Sfakiotakis, M., Lane, D.M., Davies, J.B.C.: Review of fish swimming modes for aquatic locomotion. IEEE J. Oceanic Eng. 24(2), 237–252 (1999)
Chao, L.M., Pan, G., Zhang, D., Yan, G.X.: On the drag–thrust transition of a pitching foil. Ocean Eng. 192, 106564 (2019)
Amodio, D., Callegari, M., Castellini, P., Crivellini, A., Palmieri, G., Palpacelli, M., Paone, N., Rossi, M., Sasso, M.: Integrating advanced CAE tools and testing environments for the design of complex mechanical systems. In: Longhi, S., Monteriù, A., Freddi, A., Frontoni, E., Germani, M., Revel, G. (eds.) The First Outstanding 50 Years of “Università Politecnica delle Marche”, pp. 247–258. Springer, Cham (2019)
Bassi, F., Rebay, S.: Numerical evaluation of two discontinuous Galerkin methods for the compressible Navier-Stokes equations. Int. J. Numer. Meth. Fluids 40(1–2), 197–207 (2002)
Costa, D., Palmieri, G., Callegari, M., Scaradozzi, D.: Functional design of a biomimetic flapper. In: 4th IFToMM Symposium on Mechanism Design for Robotics (2018)
Fossen, T.I.: Marine Control System-Guidance, Navigation and Control of Ships, Rigs and Underwater Vehicles. Marine Cybernetics (2002)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Costa, D., Palmieri, G., Palpacelli, M., Scaradozzi, D. (2020). Design of a Thunniform Swimming Robot in a Multiphysics Environment. In: Zeghloul, S., Laribi, M., Sandoval Arevalo, J. (eds) Advances in Service and Industrial Robotics. RAAD 2020. Mechanisms and Machine Science, vol 84. Springer, Cham. https://doi.org/10.1007/978-3-030-48989-2_28
Download citation
DOI: https://doi.org/10.1007/978-3-030-48989-2_28
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-48988-5
Online ISBN: 978-3-030-48989-2
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)