Abstract
Compliant robots with constant joint stiffness (Serial Elastic Actuators - SEA), on the contrary to ones with variable joint stiffness (Variable Stiffness Actuators – VSA), have limited capabilities for modulating robot mechanical impedance in the interaction task. However, in the case of kinematic redundancy in specific tasks, robots can exploit the null space to adjust End-Effector (EE) Cartesian stiffness. Thus, prior knowledge of the task path or the operational workspace can be used to pre-compute joint stiffness that can enable maximal ratio between maximal and minimal stiffness of the robot’s EE during the task execution, and therefore shape achievable EE stiffness to best fit the task execution. In that light, this paper elaborates on the preselection of joint stiffnesses which influences the achievable robot’s Cartesian stiffness in a specific task. Besides optimizing the available operational EE stiffness, by pre-computed joint stiffness values, the robot will be able to adapt better to specific tasks and provide a better framework for safe and efficient physical human-robot interaction. The paper presents an approach to the selection of predefined joint stiffness values of the 7-DOFs KUKA LWR, where joint stiffness is achieved/emulated with torque feedback. In the simulation experiments, the approach is depicted in the preselection of two joint stiffness values within the prescribed range, while other joint stiffness is set constant.
This paper was funded by the Program for excellent projects of young researchers (PROMIS), Science Fund and Ministry of Education, Science and Technological Development of the Republic of Serbia, and bilateral project ARRS BI-RS/18-19-053.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Pedrocchi, N., Vicentini, F., Malosio, M., Tosatti, L.M.: Safe human-robot cooperation in an industrial environment. Int. J. Adv. Robot. Syst. 10(1), 27 (2013)
Edsinger, A., Kemp, C.C.: Human-robot interaction for cooperative manipulation: handing objects to one another. In: Proceedings - IEEE International Workshop on Robot and Human Interactive Communication, pp. 1167–1172 (2007)
Ferro, F., Marchionni, L.: REEM: a humanoid service robot. In: ROBOT 2013: First Iberian Robotics Conference. Springer, Cham (2014)
Yu, H., Huang, S., Chen, G., Pan, Y., Guo, Z.: Human-robot interaction control of rehabilitation robots with series elastic actuators. IEEE Trans. Robot. 31(5), 1089–1100 (2015)
De Santis, A., Siciliano, B., De Luca, A., Bicchi, A.: An atlas of physical human–robot interaction. Mech. Mach. Theory 43(3), 253–270 (2008)
Hogan, N.: Impedance control: an approach to manipulation: Part II—implementation. J. Dyn. Syst. Measur. Control 107(1), 8–16 (1985)
Robinson, D.W., Pratt, J.E., Paluska, D.J., Pratt, G.A.: Series elastic actuator development for a biomimetic walking robot. In: Proceedings of 1999 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp. 561–568 (1999)
Pratt, G.A., Williamson, M.M.: Series elastic actuators. In: Proceedings of 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems 95. Human Robot Interaction and Cooperative Robots, vol. 1, pp. 399–406 (1995)
Vanderborght, B., Albu-Schaeffer, A., Bicchi, A., Burdet, E., Caldwell, D.G., Carloni, R., Catalano, M., Eiberger, O., Friedl, W., Ganesh, G., Garabini, M., Grebenstein, M., Grioli, G., Haddadin, S., Hoppner, H., Jafari, A., Laffranchi, M., Lefeber, D., Wolf, S.: Variable impedance actuators: a review. Robot. Auton. Syst. 61(12), 1601–1614 (2013)
Grioli, G., Wolf, S., Garabini, M., Catalano, M., Burdet, E., Caldwell, D., Carloni, R., Friedl, W., Grebenstein, M., Laffranchi, M., Lefeber, D., Stramigioli, S., Tsagarakis, N., VanDamme, M., Vanderborght, B., Albu-Schaeffer, A., Bicchi, A.: Variable stiffness actuators: the user’s point of view. Int. J. Robot. Res. 34(6), 727–743 (2015)
Lakatos, D., Petit, F., Albu-Schäffer, A.: Nonlinear oscillations for cyclic movements in human and robotic arms. IEEE Trans. Robot. 30, 865–879 (2014)
Lukić, B., Petrič, T., Žlajpah, L., Jovanović, K.: KUKA LWR robot Cartesian stiffness control based on kinematic redundancy. In: Berns, K., Görges, D. (eds.) Advances in Service and Industrial Robotics, RAAD 2019. Advances in Intelligent Systems and Computing, vol. 980. Springer, Cham (2020)
Knežević, N., Lukić, B., Jovanović, K., Petrič, T., Žlajpah, L.: End-effector Cartesian stiffness optimization: sequential quadratic programming approach. In: The 6th International Conference on Electrical, Electronic and Computing Engineering (IcETRAN 2019), p. 736. ETRAN Society (2019)
Chiaverini, S., Oriolo, G., Maciejewski, A.A.: Redundant robots. In: Springer Handbook of Robotics, 2nd edn., pp. 221–242. Springer, Cham (2016)
Petit, F., Albu-Schäffer, A.: Cartesian impedance control for a variable stiffness robot arm. In: Proceedings of International Conference on Intelligent Robots and Systems 2011 (IROS 2011), pp. 4180–4186 (2011)
Albu-Schaffer, A., Fischer, M., Schreiber, G., Schoeppe, F., Hirzinger, G.: Soft robotics: what Cartesian stiffness can obtain with passively compliant, uncoupled joints? In: Proceedings of International Conference on Intelligent Robots and Systems, 2004 (IROS 2004), vol. 4, pp. 3295–3301 (2004)
Nemec, B., Žlajpah, L., Ude, A.: Door opening by joining reinforcement learning and intelligent control. In: 2017 18th International Conference on Advanced Robotics (ICAR), pp. 222–228. IEEE (2017)
Todorov, E.: Mujoco advanced physics simulation. http://www.mujoco.org/
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Lukić, B., Jovanović, K., Knežević, N., Žlajpah, L., Petrič, T. (2020). Maximizing the End-Effector Cartesian Stiffness Range for Kinematic Redundant Robot with Compliance. In: Zeghloul, S., Laribi, M., Sandoval Arevalo, J. (eds) Advances in Service and Industrial Robotics. RAAD 2020. Mechanisms and Machine Science, vol 84. Springer, Cham. https://doi.org/10.1007/978-3-030-48989-2_23
Download citation
DOI: https://doi.org/10.1007/978-3-030-48989-2_23
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-48988-5
Online ISBN: 978-3-030-48989-2
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)