Abstract
Ceramic materials represent a special challenge for nondestructive component testing. They differ significantly in composition, material properties, defect types, defect sizes, the manufacturing process, as well as in geometric properties from metals, which are more often tested with nondestructive methods.
Some methods of nondestructive testing have been established for ceramic components for many years. These include visual inspection and dye penetrant testing, but also acoustic resonance testing, X-ray testing, and in some special cases ultrasonic testing. In addition, a number of new methods are currently being developed which can partially eliminate the disadvantages of existing technologies. These new methods include special acoustic methods, infrared transmission, optical coherence tomography, high-frequency eddy current technique, active thermography, microwave technique, and laser speckle photometry. All the methods mentioned above are examined and discussed in detail.
This article was created during Susanne Hillmann was employed at the Fraunhofer IKTS.
Similar content being viewed by others
References
Beuth. Hochleistungskeramik – Prüfverfahren für monolithische Werkstoffe und ausgewählte Prüfnormen für Pulver, DIN Taschenbuch 470, Herausgeber: DIN Deutsches Institut für Normung e.V.
DIN EN 60672-2. Keramik- und Glasisolierstoffe - Teil 2: Prüfverfahren.
ASTM-C-1175a. Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics; Internationale Norm, ASTM International, United States.
Walle G, Sklarczik C, Müller T, Netzelmann U. Prüfung von grüner Sanitärkeramik als Mittel zur Ressourceneffizienz. DGZFP Jahrestagung. 2014, Mi.3.B.4:1–10.
Krell A, Hutzler T, Klimke J. Transmission physics and consequences for materials selection, manufacturing, and applications. J Eur Ceram Soc. 2009;29:207–21.
Su R, Kirillin M, Chang EW, Sergeeva E, Yun SH, Mattson L. Perspectives of mid-infrared optical coherence tomography for inspection and micrometrology of industrial ceramics. Opt Express. 2014;22(13):15804–19. https://doi.org/10.1364/OE.22.015804.
Opitz J, Wunderlich C, Bendjus B, et al. Materialdiagnose und integrale Prüfverfahren für keramische Bauteile. Keram Z. 2016;68:249–54.
Heuer H, Schulze M, Pooch M, Gäbler S, Nocke A, Bardl G, Cherif C, Klein M, Kupke R, Vetter R, Lenz F, Kliem M, Bülow C, Goyvaerts J, Mayer T, Petrenz S. Review on quality assurance along the CFRP value chain – non-destructive testing of fabrics, preforms and CFRP by HF radio wave techniques. Compos Part B. 2015;77:494–501.
Gäbler S, Heuer H, Heinrich G. Measuring and imaging permittivity of insulators using high-frequency eddy-current devices. IEEE Trans Instrum Meas. 2015;64(8):2227–38.
Ringermacher HI. Surfing the electromagnetic spectrum. WCNDT 2012.
Hinken JH. Mikrowellenbasierte Zerstörungsfreie Prüfung. Fachbeitrag ZfP-Zeitung. 2007;104:37–42.
Schubert F, Barth M, Hipp R, Köhler B. Acoustic microscopy. In: Nathan Ida, Norbert Meyendorf (eds), Handbook of advanced non-destructive evaluation; 2018. Springer International Publishing, p. 1–40. ISBN: 978-3-319-26552-0
Briggs A, Briggs GAD, Kolosov O. Acoustic microscopy, vol. 67: Oxford University Press, Oxford; 2010. ISBN 0199232733, 9780199232734
Oishi M. Nondestructive evaluation of materials with the scanning laser acoustic microscope. IEEE Electr Insul Mag. 1991;7:25–30.
Bueno S, Hernandez M, Sanchez T, Anaya J, Baudin C. Non-destructive characterisation of alumina/aluminium titanate composites using a micromechanical model and ultrasonic determinations: Part I. Evaluation of the effective elastic constants of aluminium titanate. Ceram Int. 2008;34:181–18. Elsevier
Kurama S, Elif E. Characterization of mechanical properties of porcelain tile using ultrasonics. Gazi Univ J Sci. 2012;25:761–8.
Kulokas M, Kazys R, Mazeika L. Non-destructive evaluation of green ceramic body density by ultrasonic technique. Elektronika ir Elektrotechnika. 2011;111:71–6.
ASTM-C-1331. Standard Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method; Internationale Norm, ASTM International, United States.
ASTM-C-1332. Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique; Internationale Norm, ASTM International, United States.
Barth M, Köhler B, Bamberg J, Baron H-U. Hochauflösendes Ultraschallgoniometer zur Bestimmung von Oberflächen-Verfestigungszuständen an Nickelbasis- und Titan-Legierungen, DGZfP-Jahrestagung 2011 - Mi.4.A.3.
Coffey E. Acoustic resonance testing, 2012 future of instrumentation international workshop (fiiw) proceedings, October 2012, pp. 1–2 Identifier, ISBN: 9781467324830. https://doi.org/10.1109/FIIW.2012.6378332
Barth M; Duckhorn F; Tschöke K; Tschöpe C, Köhler B Testing of ceramics by ultrasound microscopy and vibration analysis proceedings of the 19th world conference on non-destructive testing, 2016, 1–9. Contribution: werf3
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Section Editor information
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this entry
Cite this entry
Hillmann, S., Köhler, B. (2021). Inspection of Ceramic Materials. In: Meyendorf, N., Ida, N., Singh, R., Vrana, J. (eds) Handbook of Nondestructive Evaluation 4.0. Springer, Cham. https://doi.org/10.1007/978-3-030-48200-8_16-3
Download citation
DOI: https://doi.org/10.1007/978-3-030-48200-8_16-3
Received:
Accepted:
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-48200-8
Online ISBN: 978-3-030-48200-8
eBook Packages: Springer Reference Chemistry and Mat. ScienceReference Module Physical and Materials ScienceReference Module Chemistry, Materials and Physics
Publish with us
Chapter history
-
Latest
Inspection of Ceramic Materials- Published:
- 20 July 2021
DOI: https://doi.org/10.1007/978-3-030-48200-8_16-3
-
Inspection of Ceramic Materials
- Published:
- 18 May 2021
DOI: https://doi.org/10.1007/978-3-030-48200-8_16-2
-
Original
Inspection of Ceramic Materials- Published:
- 21 April 2021
DOI: https://doi.org/10.1007/978-3-030-48200-8_16-1