Abstract
The used of conductive fabric (CF) strain sensor to measure joint motion, has recently received many interest in a variety of applications such as robotics, rehabilitation, personal wellness, sports and entertainment. However, one key limitation of existing design is that anthropometric information is required to related the joint parameters to the fabric strain readings, which make the resulting device user specific. This paper proposed an alternative design to overcome the existing limitation based on an inverted slider crank topology. To design the inverted slider crank linkage, we model the human joint as a revolute backbone chain and constraint it with an RPR chain, under specific sensor working range. To study the feasibility of our approach as a joint sensing device, we synthesis and analyze the resulting linkage to achieve specific flexion-extension range of motion (ROM) measurement as required by the wrist, ankle, elbow, and knee joint. Our results show that the proposed sensor topology can effectively measure each joint ROM.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
De DR, Veltink P (2010) Wearable technology for biomechanics: e-textile or micromechanical sensors? IEEE Eng Med Biol Mag Q Mag Eng Med Biol Soc 29(3):37–43
Kardos S, Balog P, Slosarcik S (2017) Gait dynamics sensing using IMU sensor array system. Adv Electric Electron Eng 15(1):71–76
Tedesco S, Urru A, Clifford A, O’Flynn B (2016) Experimental validation of the Tyndall portable lower-limb analysis system with wearable inertial sensors. Procedia Eng 147:208–213
McGibbon CA, Brandon SC, Brookshaw M, Sexton A (2017) Effects of an over-ground exoskeleton on external knee moments during stance phase of gait in healthy adults. Knee 24(5):977–993
Ligorio G, Zanotto D, Sabatini AM, Agrawal SK (2017) A novel functional calibration method for real-time elbow joint angles estimation with magnetic-inertial sensors. J Biomech 54:106–110
Hu X, Soh GS (2014) A study on estimation of planar gait kinematics using minimal inertial measurement units and inverse kinematics. In: Proceedings of the IEEE Engineering in Medicine and Biology Society Conference, Chicago, pp 6911–6914
Hu X, Yao C, Soh GS (2015) Performance evaluation of lower limb ambulatory measurement using reduced inertial measurement units and 3R gait model. In: Proceedings of the IEEE International Conference on Rehabilitation Robotics, Singapore, pp 549–554
Heo P, Gu GM, Lee S, Rhee K, Kim J (2007) Current hand exoskeleton technologies for rehabilitation and assistive engineering. Int J Precis Eng Manuf 13(5):807–824
Guo L, Berglin L, Mattila H (2010) Textile strain sensors characterization-sensitivity, linearity, stability and hysteresis. Nordic Text J (2):51–63
Gibbs P, Asada HH (2004) Wearable conductive fiber sensor arrays for measuring multi-axis joint motion. In: The 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society. https://doi.org/10.1109/IEMBS.2004.1404316
Maselli M, Mussi E, Cecchi F, Manti M, Tropea P, Laschi C (2018) A wearable sensing device for monitoring single planes neck movements: assessment of its performance. IEEE Sens J 18(15):6327–6336
Shyr TW, Shie JW, Jiang CH, Li JJ (2014) A textile-based wearable sensing device designed for monitoring the flexion angle of elbow and knee movements. Sensors 14(3):4050–4059
Grassi A, Cecchi F, Maselli M, Roling M, Laschi C, Cianchetti M (2017) Warp-knitted textile as a strain sensor: characterization procedure and application in a comfortable wearable goniometer. IEEE Sens J 17(18):5927–5936
Lau, JL, Liaw HC, Soh GM (2019) Conductive fabric strain sensor design and electromechanical characterization. In: IFToMM International Symposium on Robotics and Mechatronics. Springer, Cham
Park S, Ahn S, Sun J, Bhatia D, Choi D, Yang KS, Bae J, Park JJ (2019) Highly bendable and rotational textile structure with prestrained conductive sewing pattern for human joint monitoring. Adv Funct Mater 29:1808369
Faisal AI, Majumder S, Mondal T, Cowan D, Naseh S, Deen MJ (2019) Monitoring methods of human body joints: state-of-the-art and research challenges. Sensors 19(11):2629
Lippert L (2006) Clinical Kinesiology and Anatomy, 4th edn. F.A. Davis Company, Philadelphia ISBN: 9780803612433
Floyd EdD RT (2011) ATC, CSCS, Manual of Structural Kinesiology, 18th edn. McGraw-Hill, New York ISBN: 978-0-07-802251-7
Hamilton N, Weimar W, Luttgens K (2012) Kinesiology: Scientific Basis of Human Motion, 12th edn. McGraw-Hill, New York ISBN 9780078022548
McCarthy JM, Soh GS (2010) Geometric Design of Linkages, vol 11. Springer, Heidelberg
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Lau, J.L., Soh, G.S. (2020). A Wearable Joint Sensing Device Based on the Inverted Slider Crank. In: Larochelle, P., McCarthy, J. (eds) Proceedings of the 2020 USCToMM Symposium on Mechanical Systems and Robotics. USCToMM MSR 2020. Mechanisms and Machine Science, vol 83. Springer, Cham. https://doi.org/10.1007/978-3-030-43929-3_13
Download citation
DOI: https://doi.org/10.1007/978-3-030-43929-3_13
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-43928-6
Online ISBN: 978-3-030-43929-3
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)