Abstract
The vibration problem of cable-driven parallel robots has not been well studied because most of the existing methods use the spring element to model cables. In addition, to improve dynamic performance or to avoid resonance for a cable-driven parallel robot moving along a certain trajectory, its structure should be under the frequency constraint. However, the energy consumption is not minimized due to using the fixed values of boundaries of cable force in tension distributions. To solve these two problems, this study sought to use a finite element method for vibration analysis of cable-driven parallel robots. To validate the feasibility of the finite element program, vibration analysis is designed for a spatial cable-driven parallel robot and its results are compared with those of the commercial software, SAP2000. Additionally, optimization of values of boundaries of cable forces is proposed to improve dynamic performance and to save energy consumption by using differential evolution (DE). The total sum of cable forces which are related to energy consumption is the objective function. From our obtained results, it shows that the reduced percentage of the maximum cable tension between the optimized and fixed boundary cases is 10.5%.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Diao, X., Ma, O.: Vibration analysis of cable-driven parallel manipulators. Multibody Syst. Dyn. 21(4), 347–360 (2009)
Barnett, E., Gosselin, C.: Large-scale 3D printing with a cable-suspended robot. Addit. Manuf. 7, 27–44 (2015)
Ernst, H.J.: Der E-modul von seilen unter berucksichtigung des durchhanges. Der Bauingenieur. 40(2), 52–55 (1965)
Yuan, H., Courteille, E., Deblaise, D.: Static and dynamic stiffness analyses of cable-driven parallel robots with non-negligible cable mass and elasticity. Mech. Mach. Theory 85, 64–81 (2015)
Heo, J.-M., et al.: Workspace and stability analysis of a 6-DOF cable-driven parallel robot using frequency-based variable constraints. J. Mech. Sci. Technol. 32(3), 1345–1356 (2018)
Pott, A.: Cable-Driven Parallel Robots: Theory and Application. Springer, Cham (2018)
Dagalakis, N.G., Albus, J.S., Wang, B.-L., Unger, J., Lee, J.D.: Stiffness study of a parallel link robot crane for shipbuilding applications. J. Offshore Mech. Arct. Eng. 111(3), 183–193 (1989)
Nguyen, D.Q., Gouttefarde, M.: Study of reconfigurable suspended cable-driven parallel robots for airplane maintenance. In: 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 1682–1689 (2014)
Izard, J.-B., et al.: Large-scale 3D printing with cable-driven parallel robots. Constr. Robot. 1(1–4), 69–76 (2017)
Khosravi, M.A., Taghirad, H.D.: Robust PID control of fully-constrained cable driven parallel robots. Mechatronics 24(2), 87–97 (2014)
Simon, D.: Evolutionary Optimization Algorithms. John Wiley & Sons, New York (2013)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Nguyen-Van, S., Gwak, KW. (2020). A Novel Determination of Boundaries of Cable Forces for Cable-Driven Parallel Robots with Frequency Constraint by Using Differential Evolution Algorithm. In: Sattler, KU., Nguyen, D., Vu, N., Tien Long, B., Puta, H. (eds) Advances in Engineering Research and Application. ICERA 2019. Lecture Notes in Networks and Systems, vol 104. Springer, Cham. https://doi.org/10.1007/978-3-030-37497-6_4
Download citation
DOI: https://doi.org/10.1007/978-3-030-37497-6_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-37496-9
Online ISBN: 978-3-030-37497-6
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)