Abstract
An on-line path planning algorithm for automated tractor steering control in greenfield farming is proposed that follows points localized on the ground, and therefore utilizes structures provided by the environment, for orientation. Points marking a swath of hay are detected using a laser rangefinder mounted on the tractor cabin. The tractor is then steered along the path so that a trailer meets the swath at its centre position. Even in the presence of outliers, the presented planning method computes the polynomial path coefficients to be used for issuing commands to the tractor. The methodology employs a multi-step initialization procedure and robust iterative optimization.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
Notes
- 1.
The chapter also contains corrections for some minor errata in [11].
References
Gasparetto, A., Boscariol, P., Lanzutti, A., & Vidoni, R. (2015). Path planning and trajectory planning algorithms: A general overview. In G. Carbone, & F. Gomez-Bravo (Eds.), Motion and operation planning of robotic systems (pp. 3–27). Heidelberg: Springer.
Sorniotti, A., Barber, P., & De Pinto, S. (2017). Path tracking for automated driving: A tutorial on control system formulations and ongoing research. In D. Watzenig, & M. Horn (Eds.), Automated driving (pp. 71–140). Heidelberg: Springer.
Zhou, F., Song, B., & Tian, G. (2011). Bézier curve based smooth path planning for mobile robot. Journal of Information & Computational Science, 8(12), 2441–2450.
Elbanhawi, M., Simic, M., & Jazar, R. N. (2015). Continuous path smoothing for car-like robots using B-spline curves. Journal of Intelligent & Robotic Systems, 80, 23–56.
Yang, S., Wang, Z., & Zhang, H. (2017). Kinematic model based real-time path planning method with guide line for autonomous vehicle. In Proceedings of the 36th Chinese Control Conference, Dalian, China (pp. 990–994).
Choi, J., Curry, R., & Elkaim, G. (2008). Path planning based on Bézier curve for autonomous ground vehicles. In Proceedings of the Advances in Electrical & Electronics Engineering – IAENG Special Edition of the World Congress on Engineering & Computer Science, San Francisco (pp. 158–166).
Cichella, V., Kaminer, I., Walton, C., & Hovakimyan, N. (2017). Optimal motion planning for differentially flat systems using Bernstein approximation. IEEE Control Systems Letters, 2(1), 181–186.
Resende, P., & Nashashibi, F. (2010). Real-time dynamic trajectory planning for highly automated driving in highways. In Proceedings of the 13th IEEE International Conference on Intelligent Transportation Systems, Funchal (pp. 653–658).
Zhang, S., Simkani, M., & Zadeh, M. H. (2011). Automatic vehicle parallel parking design using fifth degree polynomial path planning. In Proceedings of the 2011 IEEE Vehicular Technology Conference, San Francisco (pp. 1–4).
Jiang, H., Xiao, Y., Zhang, Y., Wang, X., & Tai, H. (2013). Curve path detection of unstructured roads for the outdoor robot navigation. Mathematical and Computer Modelling, 58, 536–544.
Pichler-Scheder, M., Ritter, R., Lindinger, C., Amerstorfer, R., & Edelbauer, R. (2018). Robust online polynomial path planning for agricultural vehicles in greenland farming. In Proceedings of the 16th Mechatronics Forum International Conference, Strathclyde (pp. 98–105).
Marquardt, D. (1963). An algorithm for least-squares estimation of nonlinear parameters. SIAM Journal of Applied Mathematics, 11(2), 431–441.
Green, P. J. (1984). Iteratively reweighted least squares for maximum likelihood estimation, and some robust and resistant alternatives. Journal of Royal Statistical Society Series B (Methodological), 46(2), 149–192.
Beaton, A. E., & Tukey, J. W. (1974). The fitting of power series, meaning polynomials, illustrated on band-spectroscopic data. Techonometrics, 16, 147–185.
SECO USA Inc, All-You-Need ARM Cortex A9 SBC Development Board—UDOO @ www.udoo.org/udoo-dual-and-quad/. Accessed May 20, 2019.
Acknowledgements
This work has been supported by the COMET-K2 Center of the Linz Center of Mechatronics (LCM) funded by the Austrian federal government and the federal state of Upper Austria.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Pichler-Scheder, M., Ritter, R., Lindinger, C., Amerstorfer, R., Edelbauer, R. (2020). Path Planning for Semi-autonomous Agricultural Vehicles. In: Yan, XT., Bradley, D., Russell, D., Moore, P. (eds) Reinventing Mechatronics. Springer, Cham. https://doi.org/10.1007/978-3-030-29131-0_4
Download citation
DOI: https://doi.org/10.1007/978-3-030-29131-0_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-29130-3
Online ISBN: 978-3-030-29131-0
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)