Abstract
Electric vehicles (EVs) have gained remarkable attention due to growing concerns over global warming and the depletion of fossil fuels in the last decade. The propulsion system in EVs comprises electric motors, which are fed by energy storage units through power electronic devices. Due to limitations of conventional energy storage systems in terms of cost, sizing, management, energy and power density, it has become necessary to have an energy generating unit along with the energy storage unit. Effective utilization of energy in EVs can be carried out with the incorporation of advanced power electronics technologies. This chapter reviews the various classifications of EVs, electrical propulsion systems, energy storage systems and energy management systems. This chapter also highlights the various issues to be considered for effective electrification in EVs.
Access provided by Autonomous University of Puebla. Download conference paper PDF
Similar content being viewed by others
Keywords
23.1 Introduction
Conventional vehicles utilize gasoline/petroleum products such as petrol or diesel as fuel to propel their internal combustion engines (ICEs), which act as the main source for the energy conversion unit. These vehicles emit greenhouse gases such as carbon dioxide, hydrocarbons, carbon monoxide and nitrogen oxide, which pollute the environment globally. In the last decade, the usage of petroleum products in the transportation sector has raised concerns over the depletion of fossil fuels and the problems related to pollution and climate change.
Reduction in the emission of greenhouse gases is seen as the only major remedy for restoring the natural climatic conditions globally. The transportation sector all over the world has seen a paradigm shift towards electrification of vehicles. Electric vehicles (EVs) are expected to be more reliable, affordable, highly energy efficient and safe with zero or reduced emissions. The prominence of electric vehicles under various dimensions is presented in Fig. 23.1. Electric propulsion systems, which are used in EVs, are considered stiff competition for ICEs with the recent advancements in the field of energy sources, power electronics and electrical-driven technology. This chapter presents an overview of the classification of electric vehicles, energy sources energy management system.
23.2 Classification of Vehicles
In terms of usage of electrification, the vehicles are categorized into three groups: internal combustion engine vehicles (ICEVs), hybrid electric vehicles (HEVs) and all-electric vehicles (AEVs). Figure 23.2 illustrates the various categories of vehicles.
ICEVs use pure mechanical transmission with petrol or diesel as the main fuel. The use of electrical energy is very minimal, and it is mostly used for starting purpose. HEVs use a combination of electrical and mechanical transmission, and both fossil fuels and electrical energy. Various classifications are available with HEVs, which are discussed below. AEVs are pure electric vehicles that consume electric energy and comprise only the electric drive train and transmission. A comparative overview of the three vehicle categories is shown in Fig. 23.3.
23.2.1 Internal Combustion Engine Vehicles (ICEVs)
These vehicles are propelled by transforming chemical energy to heat energy and kinetic energy by use of a combustion chamber. These vehicles are further classified into conventional ICEVs and micro-hybrid EVs. The major difference is that the former operates without an electric vehicle, whereas the later uses one to start the combustion engine. The operating voltage of the electric motor is around 14 V and power is not more than 5kW (Fig. 23.3).
23.2.2 Hybrid Electric Vehicles (HEV)
These vehicles are propelled by both a combustion engine and an electric motor. Based on the architecture, HEVs are further classified into Mild HEV and Fully HEV. Compared with micro-HEVs, the operating voltage and power of electric motor are 150 V and 7–12 kW in mild-HEVs. However, the rating is high in mild-HEVs, as they can propel the vehicle along with the combustion engine as they use the same shaft.
Fully HEVs have the upper hand in providing better driving performance as they can propel with the use of split power path, that is, they can run either on an electric motor or an ICE or both. This category is further classified into Series Fully HEV, Parallel Fully HEV, Series-Parallel Fully HEV, Complex HEV and Plugin HEV (Fig. 23.4).
Different architectures have different characteristics, which are briefed here. Series Fully HEV comprise of power electronic converters (PECs), which are fed using a battery along with the ICE. With bidirectional operating property of the converter topologies, it is possible to store energy in the battery from the energy generated using the generator. Depending on fuel capacity and generator power, the battery pack can be appropriately designed. It is very much suitable for driving in city conditions. Parallel fully HEVs propel utilizing both electrical power and ICE, along with a mechanical coupler. The vehicles can either run using ICE or EM. These HEVs have better efficiency than series Fully HEVs and can incorporate lower-rated electric motors and batteries as they are very well complimented by ICE. The series-parallel Fully HEVs use two mechanical power couplers as the drive train is powered both electrically and mechanically. These HEVs are costly and complicated even though they incorporate the merits of both parallel and series Fully HEVs. Plug-in hybrid electric vehicles make use of charging infrastructures built to charge the battery from the grid. The charging station and charger configuration are not discussed in the chapter considered. It allows the user to choose the propulsion based on the capacity of the battery installed.
23.2.3 All-Electric Vehicles
Electric power is the lone source used to propel the vehicle. Battery Electric Vehicles (BEVs) and Fuel Cell Electric Vehicle (FCEVs) are the classifications of AEVs. BEVs use energy-storing devices, mostly batteries, from which energy is converted using a PEC and fed into the motor. Based on the capacity of the battery installed in the vehicle, the driving range of the vehicle can be calculated. Increasing the battery size would increase the weight of the vehicle, thereby reducing its speed. Frequent charging of the vehicles proved to be a demerit compared with HEVs. The FCEVs comprise energy-generating units along with the battery. Hydrogen is the key component, which is being converted using fuel cell technology. Among various energy-generating systems, fuel cell is comparatively better in terms of integration with other energy-storing systems.
23.3 Electric Propulsion System
The core part of any EV is the electric propulsion system (EPS), which comprises components like the energy storage system (ESS), the power electronic converter, the electric motor and the electronic control unit. Based on the architecture of the EV considered, the integration of these components may differ, and it plays a vital role. In order to compete with ICEV, the EPS should take into account issues such as weight of the vehicle, drive train, durability and flexibility, compact packaging and maintenance. Many researches are taking place to design and implement the integration of electric motor and PEC to provide a better driving range. The integration has to focus on issues such as availability of the right motor at affordable cost, promising battery technology and suitable PEC configuration to support efficient transmission.
23.4 Energy Storage System
Energy storage systems consist of both energy sources and energy storing devices, which are attracting the power industries as they help reduce the emission of greenhouse gases. With the advancement of ESS technologies, EV is considered an alternative to ICE, thereby replacing fossil fuels with renewable energy technologies.
ESS includes energy-generating devices such as fuel cells and other storing devices such as batteries, ultracapacitors and flywheel. ESS can be classified into rechargeable and non-rechargeable technologies.
The operating range of the EV is directly dependent on these technologies and they are illustrated in Fig. 23.5. Comparison of the various technologies is given in Fig. 23.6.
23.4.1 Battery
A battery is a storage device that is made up of electrochemical cells that convert stored chemical energy into electrical energy. Battery capacity and state of charge are the main characteristics of battery, which should be taken into consideration while designing an EV. Other characteristics include high energy density, flexibility, modularity and affordability. Battery requirement is different for different types of EV. BEVs require high-energy-density batteries, HEVs require high-power-density batteries and PHEVs require intermediate battery capacity with energy density like that of a BEV and power density like that of an HEV.
23.4.2 Ultracapacitor
An ultracapacitor (UC) or super capacitor and a normal capacitor are similar in built, but the former has higher capacitance than a regular capacitor. The ultracapacitor’s characteristics include maintenance-free operation, longer operation cycle life and insensitive to environment temperature variation. The three types of UC technologies established so far are electric double-layer capacitors (EDLC)—carbon/carbon, pseudo-capacitors and hybrid capacitors.
The difference between those UCs is in their energy storage mechanisms and the electrode materials used. In EVTs, ultracapacitors can be used as primary energy devices for power delivery during starting, acceleration and hill climbing, as well as for recovery of braking energy during regenerative braking. It can downsize as well as extend the life of a battery and reduce maintenance and replacement costs.
23.4.3 Flywheel
Flywheel is a storage device that stores and delivers mechanical energy in the form of rotational kinetic energy as well as electrical energy. Limitations of using a flywheel in EVs are that they are heavy weight and costly. Recent advancement in frictionless magnetic bearing, carbon-fibre composite materials, manufacturing technique and sophisticated power electronic controllers has accelerated the development of flywheel energy storage.
23.5 Energy Management
A major challenge in EVs is the development of control and management of power from energy sources to the PEC and from the PEC to various loads. Based on the architecture of the EVs, the energy source may be a single- or multi-input source. Integration of such hybrid sources with the PEC involves understanding of control of PEC components as well as the overall control of the EV for a better driving profile and range. An energy management system (EMS) manages all possible energy resources to feed the power to the ESSs in EVs. An EMS involves low-level component control and high-level supervisory control. This high-level controller usually comprises event-based or time-based conditions that coordinate the component-level operation. There are two classes of control, that is, rule-based (RB) control and optimization approaches control, which are shown in Fig. 23.7.
Rule-based control (RB) is the control system based on human expertise (engineering knowledge), heuristic, intuition, even mathematical model, predefined driving cycles and load-levelling strategy on vehicles. RB control can be divided into deterministic rule-based methods and fuzzy rule-based methods. Deterministic rule-based use looks up tables (not real-time data) to design deterministic rules. It can be subdivided again into thermostat (on/off) control strategy, power follower (baseline) control strategy, modified power follower (baseline) strategy and state machine-based strategy. However, fuzzy rule-based methods use real-time parameters and suboptimal power split, which are non-linear data and linguistic knowledge to calculate optimal output.
Optimization approach control is based on analytical or numerical operations, which are able, obviously, to minimize the cost function. Optimization approach control can be further classified into global optimization and real-time optimization methods (RTO). Global optimization is based on knowledge of future and past power demands to minimize the cost function through fuel efficiency (fuel consumption) and emissions over a fixed driving cycle. It is useful in design and comparison purposes if implemented together with rule-based strategies. There are a lot of strategies that are categorized under global optimization, for example, linear programming, control theory approach, optimal control, dynamic programming (DP), stochastic DP, genetic algorithm and adaptive fuzzy RB, while real-time optimization consists of equivalent fuel consumption minimization, decoupling control, robust control approach and optimal predictive control. Real-time optimization is based on the system variable at the current data, which is instantaneous cost function. Real-time optimization comprises equivalent fuel consumption minimization strategy (ECMS), decoupling control, robust control approach and optimal predictive control. These control strategies include the drivability of the vehicle.
23.6 Conclusion
This chapter reviews the drive train architecture of EVs with current updates on energy storage as well as energy generation units. It also presents the various electrical drives that can be adopted in EVs. The EMS of an EV is briefed up to introductory level. A comparison with ICEVs is carried out and it can be seen that EVs are the only alternative for reducing emission of greenhouse gases. A few pitfalls seen with AEVs can be seen as opportunities for further research and development.
Abbreviations
- EV:
-
Electric Vehicle
- ICE:
-
Internal Combustion Engines
- ICEV:
-
Internal Combustion Engine Vehicle
- HEV:
-
Hybrid Electric Vehicle
- AEV:
-
All Electric Vehicles
- PEC:
-
Power Electronic Converters
- BEV:
-
Battery Electric Vehicle
- FCEV:
-
Fuel Cell Electric Vehicle
- EPS:
-
Electric Propulsion System
- ESS:
-
Energy Storage System
- PHEV:
-
Plugin Electric Vehicle
- UC:
-
Ultra capacitor
- EDLC:
-
Electric Double-layer Capacitors
- EMS:
-
Energy Management System
- RB:
-
Rule Based
- RTO:
-
Real Time Optimizations
References
Chan CC (2007) The state of the art of electric, hybrid, and fuel cell vehicles. Proc IEEE 95(4):704–718
Pesaran A et al (2006) Energy storage requirement analysis for advanced vehicles (fuel cell, mild hybrid, and plug-in hybrid). In: NREL Deliverable Report in Fulfillment of FY2006 August Milestone for Energy Storage Task. Midwest Research Institute (MRI)
Mikkelsen KB (2010) Design and evaluation of hybrid energy storage systems for electric powertrains. University of Waterloo, Waterloo
Mehrdad Ehsani YG, Ali E (2010) Modern electric, hybrid electric, and fuel cell vehicles, 2nd edn. CRC Press, Boca Raton, p 534
Garner IF (1991) Vehicle auxiliary power applications for solar cells. In: Eighth international conference on automotive electronics
Emadi A, Williamson SS, Khaligh A (2006) Power electronics intensive solutions for advanced electric, hybrid electric, and fuel cell vehicular power systems. IEEE Trans Power Electron 21(3):567–577
Emadi A, Rajashekara K, Williamson SS, Lukic SM (2005) Topological overview of hybrid electric and fuel cell vehicular power system architectures and configurations. IEEE Trans Veh Technol 54:763–770
Karden E et al (2007) Energy storage devices for future hybrid electric vehicles. J Power Sources 168(1):2–11. [78]
Chen W, Round S, Duke R (2002) Design of an auxiliary power distribution network for an electric vehicle. In: Proceedings. The first IEEE international workshop on electronic design, test and applications
Chau KT, Wong YS, Chan CC (1999) An overview of energy sources for electric vehicles. Energy Convers Manag 40:1021–1039
Lukic SM, Cao J, Bansal RC, Rodriguez F, Emadi A (2008) Energy storage systems forautomotive applications. IEEE Trans Ind Electron 55(6):2258–2267
Azidin FA, Hannan MA, Mohamed A (2013) Renewable energy technologies and hybridelectric vehicle challenges. Prz Elektrotech 89(8):150–156
Xing Y, Ma EWM, Tsui KL, Pecht M (2011) Battery management systems in electric andhybrid vehicles. Energies 4:1840–1857
Rahimi-Eichi H, Ojha U, Baronti F, Chow MY (2013) Battery management system: an overview of its application in the smart grid and electric vehicles. IEEE Ind Electron Mag, [June]
Emadi A (2011) Transportation 2.0. IEEE Power Energ Mag 9(4):18–29
Richardson DB (2013) Electric vehicles and the electric grid: a review of modeling approaches impacts, and renewable energy integration. Renew Sust Energ Rev 19:247–254
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Ravi Kumar, P., Gowri Shankar, C., Uthirasamy, R., Vijayalakshmi, V.J. (2020). A Review of Electric Vehicle Technologies. In: Kumar, L., Jayashree, L., Manimegalai, R. (eds) Proceedings of International Conference on Artificial Intelligence, Smart Grid and Smart City Applications. AISGSC 2019 2019. Springer, Cham. https://doi.org/10.1007/978-3-030-24051-6_23
Download citation
DOI: https://doi.org/10.1007/978-3-030-24051-6_23
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-24050-9
Online ISBN: 978-3-030-24051-6
eBook Packages: EngineeringEngineering (R0)