Abstract
The Industry 4.0 concept assumes the implementation of predictive maintenance as an integral part of manufacturing systems. The parallel-serial manufacturing system includes groups of redundant resources. In the case of damage or malfunction, one or other of them could complete manufacturing operations. In this paper, an analysis of the performance and average lifespan of the products of the parallel-serial manufacturing system is presented, for different methods of material flow control. The parallel-serial manufacturing system is considered where the availability of resources and buffer capacity is the input value and the throughput and average lifespan of the products, that is, the time that their details remain in the system, is the output value. The performance of the system is analysed, using different dispatching rules which are allocated to the manufacturing resources. The simulation model of the system is created using Tecnomatix Plant Simulation.
This work is supported by program of the Polish Minister of Science and Higher Education under the name “Regional Initiative of Excellence” in 2019–2022, project no. 003/RID/2018/19, funding amount 11 936 596.10 PLN.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Driessen, J.P.C., Peng, H., Houtum, G.J.: Maintenance optimisation under non-constant probabilities of imperfect inspections. Reliab. Eng. Syst. Saf. 165, 115–123 (2017)
Dhouib, K., Gharbi, A., Aziza, M.N.B.: Joint optimal production control/preventive maintenance policy for imperfect process manufacturing cell. Int. J. Prod. Econ. 137(1), 126–136 (2012)
Yeh, R.H., Kao, K.-C., Chang, W.L.: Optimal preventive maintenance policy for leased equipment using failure rate reduction. Comput. Ind. Eng. 57, 304–309 (2009)
Renna, P.: Influence of maintenance policies on multi-stage manufacturing systems in dynamic conditions. Int. J. Prod. Res. 50, 345–357 (2012)
Mokhtari, H., Mozdgir, A., Kamal, Abadi I.: A reliability/availability approach to joint production and maintenance scheduling with multiple preventive maintenance services. Int. J. Prod. Res. 50, 5906–5925 (2012)
Boschian, V., Rezg, N., Chelbi, A.: Contribution of simulation to the optimization of maintenance strategies for a randomly failing production system. Eur. J. Oper. Res. 197(3), 1142–1149 (2009)
Wan, J., Tang, S., Li, D., Wang, S., Liu, C., Abbas, H., Vasilakos, A.V.: A manufacturing big data solution for active preventive maintenance. IEEE Trans. Ind. Inform. 13, 2039–2047 (2017)
Ni, J., Jin, X.: Decision support systems for effective maintenance, operations. CIRP Ann. Manufact. Technol. 61, 411–414 (2012)
Kłos, S., Patalas-Maliszewska, J.: The use of the simulation method in analysing the performance of a predictive maintenance system. In: 15th International Conference on Distributed Computing And Artificial Intelligence, Special Sessions, Advances in Intelligent Systems and Computing, vol. 801, pp. 42–49. Springer Nature Switzerland (2019)
Kłos, S., Patalas-Maliszewska, J.: Using a simulation method for intelligent maintenance management. In: The First International Conference on Intelligent Systems in Production Engineering and Maintenance - ISPEM 2017, Advances in Intelligent Systems and Computing, vol. 637, pp. 85–95. Springer International Publishing (2018)
Bocewicz, G.: Robustness of multimodal transportation networks. Eksploatacja i Niezawodność-Maintenance and Reliability 16(2), 259–269 (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Kłos, S., Patalas-Maliszewska, J. (2020). Using the Simulation Method for Modelling a Manufacturing System of Predictive Maintenance. In: Herrera-Viedma, E., Vale, Z., Nielsen, P., Martin Del Rey, A., Casado Vara , R. (eds) Distributed Computing and Artificial Intelligence, 16th International Conference, Special Sessions. DCAI 2019. Advances in Intelligent Systems and Computing, vol 1004. Springer, Cham. https://doi.org/10.1007/978-3-030-23946-6_7
Download citation
DOI: https://doi.org/10.1007/978-3-030-23946-6_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-23945-9
Online ISBN: 978-3-030-23946-6
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)