Abstract
With the imperious demands for reducing friction and wear under special working conditions, it need to devote more efforts to develop tribometer with various testing environment such as high vacuum and low temperature. In this work, a novel micro-tribometer has been designed and built with a resolution of friction force better than 10-4 N. A double leaf cantilever was employed as force senor and the corresponding deformation was measured by a laser interferometer. The lowest sample temperature was about 5 K which was achieved by GM refrigerators. And the precision of temperature control was about ± 0.1 K. The highest vacuum of the experimental chamber was up to 5×10-5 Pa, which was realized by a turbo pump and a mechanical pump. In the testing of the tribometer, sample temperature of about 5 K and chamber vacuum of about 2.04 × 10-5 Pa has been obtained. In addition, the resolution of friction force was about 6.9 × 10-5 N.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Marchetto, D., Benzig, R., Korres, S., Dienwiebel, M.: Design and testing of ultrahigh vacuum microtribometer. Tribology - Materials, Surfaces & Interfaces 6(3), 95–101 (2013).
Liu, Y., Gubisch, M., Haensel, T., Spiess, L., Schaefer, J. A.: Evaluation of the friction of WC/DLC solid lubricating films in vacuum. Tribology International 39(12), 1584–1590 (2006).
Krick, B. A., Sawyer, W. G.: Space tribometers: design for exposed experiments on orbit. Tribology Letters 41(1), 303–311 (2011).
Goto, M., Nakata, N., Honda, F.: Tribological behavior of an ag sub-nanometer-thick film on an si (111) 7 × 7 surface at elevated temperatures. Wear 256(7–8), 726–734 (2004).
Gradt, T., Borner, H., Schneider, T.: Low temperature tribometers and the behaviour of adlc coatings in cryogenic environment. Tribology International 34(4), 225–230 (2001).
Colbert, R. S., Sawyer, W. G.: Thermal dependence of the wear of molybdenum disulphide coatings. Wear 269(11), 719–723 (2010).
Ostrovskaya, Y. L., Yukhno, T. P., Gamulya, G. D., Vvedenskij, Y. V., Kuleba, V. I.: Low temperature tribology at the b. verkin institute for low temperature physics & engineering (historical review). Tribology International 34(4), 265–276 (2001).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Wu, P., Zhang, C., Luo, J. (2019). Design and Built of a Micro-Tribometer with High Vacuum and Low Temperature. In: Uhl, T. (eds) Advances in Mechanism and Machine Science. IFToMM WC 2019. Mechanisms and Machine Science, vol 73. Springer, Cham. https://doi.org/10.1007/978-3-030-20131-9_375
Download citation
DOI: https://doi.org/10.1007/978-3-030-20131-9_375
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-20130-2
Online ISBN: 978-3-030-20131-9
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)