Abstract
In this paper the methods of structural and dimensional synthesis of parallel manipulator of a class RoboMech for reproducing the series of horizontal trajectories are developed. This parallel manipulator is formed by connecting the output point to the base using two closing kinematic chains: one passive and one active ones. The synthesis parameters of the active closing kinematic chain of RPR type are determined on the basis of the least-square approximation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Waldron K.J. and Kinzel G.L. The Relation Between Actuator Geometry and Mechanical Efficiency in Robots. Proc. 4th CISM-IFToMM Symposium on Theory and Practices of Manipulators, Poland, 1981, pp. 366-374
Song S.M., Lee J.K., Waldron K.J. Motion Study of Two- and Three-Dimensional Panthograph Mechanisms. Mechanism and Machine Theory, Vol. 22, No. 4, 1987, pp. 321-331
Hunt K.H. Structural Kinematics of In-Parallel Actuated Robot-Arms. Trans. ASME Journal of Mech., Transm. and Autom. in Design, 1983, Vol. 105, pp. 705-712
Smaili A.A. Robomechs: A New Class of Linkage Arms for Multi-Task Applications. Mechanism and Machine Theory, Vol. 30, No. 2, February 1995, pp. 169-176
Baigunchekov Zh. et.al. Parallel Manipulator of a Class RoboMech. Mechanism and Machine Science. Proc. of ASIAN MMS 2016 & CCMMS 2016. Springer, 2016, pp. 547-557
Baigunchekov Zh. et.al. Synthesis of Reconfigurable Positioning Parallel Manipulator of a Class RoboMech. Proc. 4th IEEE/IFToMM Int.Conf. on Reconfigurable Mechanisms & Robots, Delft, The Netherlands, 20-22 June 2018, 6p
Baigunchekov Zh., Ibrayev, S.M., Izmambetov, M.B., Naurushev, B.K., Mustafa, A.K. «Synthesis of Cartesian Manipulator of a Class Ro-boMech». Mechanisms and Machine Science. Vol. 66, Springer, 2018, pp. 69-76.
J.M. McGarthy, G.S. Soh. Geometric Design of Linkages. Springer, 2011.
A. Erdman, G. Sandor. Analysis and Synthesis. Prentice Hall, 2001.
Freudenstein F., Sandor G.N. Synthesis of Path Generating Mechanisms by Means of Programmed Digital Computer. Journal of Engineering for Industry, 81(2), 1959, pp.195-168.
Plecnic M., McCarthy J.M. Numerical Synthesis of Six –Bar Linkages for Mechanical Computation. Journal of Mechanisms and Robotics, 6 (3); 031012, 2014.
Jorge Angeles, Bai Shaoping. Kinematic Synthesis. McGill University, Montreal (Quebec), 2016.
Sobol I.M., Statnikov R.B. Choosing the Optimal Parametric in Problems with Many Criterions (in Russian). Moscow, 1981.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Baigunchekov, Z., Izmambetov, M., Zhumasheva, Z., Baigunchekov, T., Mustafa, A. (2019). Parallel manipulator of a class RoboMech for generation of horizontal trajectories family. In: Uhl, T. (eds) Advances in Mechanism and Machine Science. IFToMM WC 2019. Mechanisms and Machine Science, vol 73. Springer, Cham. https://doi.org/10.1007/978-3-030-20131-9_137
Download citation
DOI: https://doi.org/10.1007/978-3-030-20131-9_137
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-20130-2
Online ISBN: 978-3-030-20131-9
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)